14.10.2019

The art of creating figures and shapes out of paper is called origami. This work has been known since ancient times, it is very popular today. Even if you have never done this business before, you will be able to make a simple paper slide, it is very interesting and exciting.

To keep the lines neat and precise, iron them with a ruler several times. Take a square piece of colored or white paper and cut it exactly in half. Work will happen only with one part of it. Fold the working part in half lengthwise, and then again lengthwise and in half. We get a long narrow strip. Let's turn it one turn and straighten it well.

Now fold it in half wide. Next, fold the edges of the paper one third, iron several times and return them to their original position. Then bend the corners of the paper at the transverse fold in the form of triangles, while you will open the double edges of the leaflet.

When wondering how to make a paper slide neatly and beautifully, you need to pay attention once again to the fact that the folds must be carefully ironed. Without forgetting all these tips, we continue to form a paper slide, lay out our slide in length and turn it over with the other side towards us.

Now we bend the edges of the wide part a third inward, we get a narrow strip of the same width. The part with the sides along the edges is the slope of the paper slide, and from the other part we fold the ladder. That is, we bend the part without sides with an accordion. We straighten the accordion ladder, fix the corner of the slide. That's it, the paper slide is ready.

This is such a miracle in a matter of minutes, easy and simple. It is useful to teach children this sacrament of origami, it will seem to them a real magical miracle trick, interesting and exciting. And such exercises significantly improve fine motor skills, logic, attentiveness, develop analytical thinking, perseverance, instill accuracy and accuracy, enhance mental and creative activity.

It is better to start with simple figures and shapes, gradually mastering more complex shapes and paper compositions. You can make for a child or teach him to make figures on his own, and then play them together. To a paper slide, you can make paper men, animals, cars, and so on.

For children, this is a whole fascinating world created by with my own hands. And adults in creative process forget about their problems and stress. Subsequently, you can learn how to work with glue and scissors, fastening several figures into one large part, making cuts so that the figure looks more voluminous and spectacular.

Below are a few photos of an alpine slide, the design of which differs in many ways. Scheme for creating a slide It is not difficult to make a beautiful rock garden with your own hands, but in order for it to retain its beauty for many years, you must follow the advice of experienced landscape designers: many mistakes and correct the shortcomings on paper, and not on the finished flower garden. The height of the rock garden can reach 1.5 m.

Be sure to add soil between the stones where the plants will be planted. The remains should be removed and masked with small pebbles or other elements. For a long time I want to decorate the site with an alpine slide. There is only one solution to the problem: urgently plant small-bulbous ones on the territory of the hill, which will endow the entire territory with beautiful flowering, and cheer you up. This means dividing the territory of the rock garden into "plateau", "valley", "tops" and "cliffs". It will turn out not a work of landscape art, but an ordinary dump. For the manufacture of a drainage system in a selected area, a drawing of the future composition is marked with pegs and ropes, after which the soil inside the contour is taken out to a depth of 20-100 cm, this value depends on the size and desired height of the future structure. Everyone who plans to make an alpine slide with their own hands should know that this structure is not a meaningless heap of stones, but a model of a natural mountain landscape Site preparation Next, prepare the site: remove the top layer of turf, the depth should be at least 300 mm. If you share your network connection, ask your administrator for help - a different computer using the same IP address may be responsible. Mountain crops are sensitive to dampness and rot. Right when reading it, I wanted to take and build such a miracle in my dacha.

However, for climbing plants... If you want to give your garden an exotic flavor, then you should pay attention to the garden art of Japan, which expresses the ideological attitude of local residents to nature. It is only necessary to provide for all the nuances. For a large area, there are no restrictions on the flight of fantasy: an alpine slide can occupy a decent area along which paths and steps will pass, or a very small island with a couple of stones.

Video about the creation of an alpine slide Hello, dear editors of the site! Between the tracks, it is desirable to leave plots of land intended for or. If time permits, it is better to wait until the weed seeds contained in the soil are sown in order to further destroy them with special preparations, this will facilitate further plant care. For an alpine slide, lighting should be provided so that its beauty is revealed in a new way at dusk. On a large site, it is immediately necessary to provide paths and transitions. Alternatively, you can use large pebbles to create individual elements or the entire rocky part of the slide. Agree: it is very difficult to imagine an alpine hill that does not bloom in early spring. As practice shows, even the most experienced designer rarely manages to place the stones correctly right away, and often they have to be moved from place to place to achieve the perfect picture. The resulting mixture must be poured onto the prepared layer and form a hill up to 1 m high. A pump is installed at the bottom, the power of which depends on the height of the cascade in the store they will select the appropriate option. thanks for original ideas decor. The type of alpine flower beds depends on the size, type of stones and the selected location. If the soil mixture is prepared independently, then you can make a composition of peat, humus, soddy soil and sand.

Helpful Hints

1. Prepare a cardboard box, rotate it as shown in the image and cut off the top of it (see image). Set aside the cut pieces of the box.

2. Put the box on its side and connect the sides using tape.

3. Turn the box over and tape the pieces together where the yellow arrows point.

4. We make the roof of the house. Prepare those parts of the box that you got rid of at the beginning. Use adhesive tape to connect these parts in the place where the arrows point.

5. Tape the roof to the main body of the house.

6. Dotted lines ( yellow color) indicates where to cut the cardboard.

7. Connect the parts indicated by the yellow arrows (see image).

This is the house you will get.

How to make a house (castle) out of cardboard

Making such a beautiful castle is not difficult at all. You can easily fold it and store it conveniently.

Such a house can be placed on any surface (floor, table)

You can make both a castle and a simple house, a fire station or a store - it all depends on what exactly you want.

You will need:

plain paper

Scissors (clerical knife)

Pencil

Acrylic paint (felt-tip pens, pencils, crayons)

1. On plain paper, draw a diagram of future walls. Adjust to desired dimensions.

2. Make windows and doors large enough for a child's hand to fit through.

3. Decorate the walls to your liking. For this, use acrylic paint (gouache), pencils, felt-tip pens and even pieces of fabric that can be glued with PVA glue.

4. When all the walls are decorated, simply insert them into each other, making cuts in the middle of each wall - one wall on top, the other on the bottom.

* Cuts must be made to the middle of the wall.

Another do-it-yourself cardboard house

Model of a house made of cardboard (photo)

How to make lamps (chandeliers) out of cardboard

Such a simple and very inexpensive cardboard lamp can decorate a kitchen, a veranda, a pantry and even a children's room.

You will need:

Bulb

Paint (optional)

Scissors or utility knife (if needed)

Cardboard crafts on the theme "Arctic"

Easy and inexpensive to do These are such beautiful toys made of cardboard.The cold climate is home to a wide range of wildlife, including deer, polar bear, and Siberian husky, all of which can be made from cardboard.

For complete picture you can make sleighs and Christmas trees.

Draw diagrams of all the details and cut them out, then assemble them.

What can be made from cardboard: gift bags

If you turn on your imagination, then you can make original gift bags out of nondescript cardboard packaging.

You will need:

Cardboard (can be from old boxes)

Scissors (if necessary)

bright ribbons

DIY cardboard toys: "Slides"

You can make this cardboard craft with your child. He will like to participate in the creation of an interesting toy, which he will continue to play with pleasure.

You will need:

A small cardboard box (you can use cereal or rice)

Tennis balls (or any balls of small size and weight)

Crafts from paper and cardboard: "Big slides"

This toy is made according to the same principle as the previous one, only the sizes are larger here.

You will need:

Scissors or utility knife

Part big cardboard box or packaging

Cardboard cylinders (from toilet paper or paper towels)

PVA glue (you can "Moment")

* If the cardboard cylinder is not too long, try gluing several cylinders together with tape.

* If necessary, cut the cylinder with a utility knife.

* You can cut the cylinders in half to see how the balls descend on them.

* Apply glue to the side of each cylinder (or halves of the cylinder) and glue the "hill" to the main cardboard part (see image).

* you can roll tennis balls, small cars, etc.

How to make craft "Town" out of paper and cardboard

If you have a large cardboard box left, several boxes, a cardboard sheet, or several cardboard sheets, then you may well not Big city ok for a child.

This toy is very good for general development child.

* When using a large box or sheet, all you need to do is cut off the extra details and start drawing the road.

* If there is no big box, then use tape to connect all the details to make a big city. It is worth noting that you need to glue the adhesive tape on the back of the cardboard, otherwise it will be inconvenient to draw with a marker.

* After you have drawn the road, paint with bright colors several houses, important city buildings (fire department, for example), railway etc.

DIY cardboard layouts: catapult

You will need:

small cardboard box

Tight rubber ring (or hair tie)

Pencil

Matchbox

Toothpicks (matches)

Scissors and/or utility knife

Adhesive tape (adhesive tape)

1. We make a basket (from which the "shells" of the catapult will fly out).

cook Matchbox or a small piece of cardboard.

Use duct tape to stick the basket to the pencil and set the blank to the side.

2. Prepare a small cardboard box.

Make the necessary cuts with scissors and fold it so that you get a figure, as in the image

Make a small hole in the middle on the side (for a tight elastic band)

Make the same hole on the opposite side.

Pass the elastic through one of the holes

Insert a few toothpicks (matches) into the loop formed and tighten the loop to fix them

Repeat the same on the reverse side

* It is worth noting that the elastic must be well taut for the catapult to work well.

3. Start twisting the elastic inside the box (see image). Do it in the middle.

4. Gently insert the pencil with the basket into the twisted rubber band.

5. Now you can lower the catapult and release it.

Making cardboard crafts with your own hands is a great way not only to have fun with your child, but also to help his creative and mental development.

The benefits of making crafts

This type of creativity develops in children such wonderful qualities as attentiveness, perseverance, accuracy, non-standard, creative thinking.

Also, by creating crafts from paper and cardboard, the child trains fine motor skills of the hands, which, as has been repeatedly proven by both science and personal experience many mothers, contributes to the development of intelligence and ingenuity in children.

Accessible type of creativity

Another, also important advantage of this type of activity, is that the material for children's crafts made of cardboard is the most affordable thing. You can find it in any office supply store different kinds colored paper (velvet, self-adhesive, matte, patterned, etc.) and cardboard (colored, white, corrugated, etc.) and buy them for mere pennies.

Waste cardboard boxes and packaging can also become material for cardboard crafts for children. Agree, the budget of this type of creativity is very attractive.

As an addition to paper and cardboard crafts, you can use absolutely any materials: ribbons and beads, sparkles, plasticine, natural materials, paints and much more. The main tools needed for any such craft will be scissors, glue, a ruler and a pencil.

On our site there are many workshops on making crafts, including from colored paper and cardboard. In this article you see one of them.

Craft "Airplane" from cardboard

With our simple and clear step by step instructions you can learn how to make such a cute and original cardboard airplane with your own hands, and then make it with your baby.

Such a craft will be a wonderful gift for dad or grandfather on his birthday or February 23, and will also be able to captivate your child for a while, immersing him in the world of creativity.

By the way, an airplane made according to our instructions can be used as an original design solution for decorating a nursery: you just need to hang it on a chandelier with a thin thread.

So, we need:

• several blue sheets of cardboard;
• several small pieces of pink and white paper;
• empty matchbox;
• simple pencil;
• ruler;
• PVA glue;
• scissors.

How to make an Airplane craft out of cardboard?

Step-by-step description of making crafts:

First of all, you need to draw on the wrong side of the cardboard sheets a kind of “pattern” of the details of the future aircraft. To begin with, we draw a strip 1.5-2 cm wide and 30 cm long. It will be the basis of the craft - the tail of the aircraft.

Without what it is impossible to imagine any aircraft? That's right, wings. Their width should be a couple of millimeters more than the width of a matchbox, and their length should be about 13 centimeters.

Also, two more strips will be required there - for the lower part of the tail. One is 1 cm wide and 4 cm long, and the second is 1 cm wide and 6 cm long.

Note!

Let's start with the tail. To do this, we bend the longest strip, made specifically for the tail, exactly in half, with the colored side out. Next, grease the edges of the resulting strip with glue and glue them to the matchbox in height (see photo).

It is important to glue the ends of the strip exactly in the middle of the top and bottom of the box. Set aside the resulting structure for a while, let the glue dry. And in the free time we will be engaged in the manufacture of wings.

First of all, we take two strips intended for these same wings, put them together and carefully round off all the corners to get the same wings of the liner.

We return to the preparation of the tail: we take the boxes and glue our wings to it on both sides. Note that the wings must completely cover the boxes, for this, position them exactly in the center.

Let's add the tail section of the aircraft with the necessary details. To do this, take two identical strips of cardboard cut out in advance. We do with them the same way as with the wings: put them together and round the corners. Then grease the back side of the strips with glue and apply to each other.

Do not use too much glue, as the blanks soaked too much with it look ugly.

Note!

We insert the part just made under the bend line of the model and glue it. There is only one detail left: we take the last strip, bend it in half, with the colored side out, then bend one centimeter from each edge. This part should be glued to the very end of the tail of our aircraft.

On this, the main honor of the work is completed, let's proceed to the decor. In this part of the work, you can use your imagination to the maximum. You can decorate the plane as you like, it all depends on your desires and the desires of your child.

We suggest cutting a screw out of white paper and sticking it on the nose of the plane. To make it easier to cut such a complex part, first draw a sketch with a simple pencil.

Cut out small flowers or stars from pink or any other paper and glue them all over the body of the aircraft. Also, crafts can be decorated with drawings, sparkles, beads, or whatever you have enough imagination and opportunities for.

This completes the work on making paper and cardboard crafts. We hope this article was useful for you and you will definitely create such a toy with your child.

Note!

Photo of cardboard crafts

Date: January 13, 2017

Close … [X]

The part with the sides along the edges is the slope of the paper slide, and from the other part we fold the ladder. That is, we bend the part without sides with an accordion. We straighten the accordion ladder, fix the corner of the slide. That's it, the paper slide is ready. #6 Here is a miracle in minutes, easy.

#1 The art of creating shapes and forms out of paper is called origami. This work has been known since ancient times, it is very popular today. Even if you have never done this business before, you will be able to make a simple paper slide, this.

An exact approach to the unsupervised regularized least-squares classification problem, implemented in Python using the Numpy and the Scipy packages. The learning problem considered is a variant of the maximum margin clustering, task which can be regarded as the direct.

Tilda dolls are designed by Norwegian designer Tone Finnanger. Here I will post patterns for the most common and beloved by all puppeteers of Tilda dolls and toys. I will write more about the history of creation later. But you can read in Tales interesting stories about others.

In this example, a penguin was made from a balloon. In this section, to help parents, we publish articles and materials on the preparation and conduct of new year holidays. A homemade snowman is a wonderful craft for the New Year. Each strip must first be folded in half lengthwise, a.

However, it is still more interesting to show imagination to strengthen the forks on the wall above the desktop (install photo-1 in an old sugar bowl (use gypsum for fixing or a floral sponge as a temporary remedy, combine photo-2 on a common basis (photo-6). Or simply creatively bend.mirrors and clocks with.

All these conditions will reduce the cost of building an artificial reservoir. It is desirable that the bottom and banks of the pond consist of clay or loam soils that are impermeable or less permeable to water, or are lined with them. If the bottom is sandy, the water will not hold. When creating an artificial

Noise block head 2 rio kia Spectra kia spectrum Auto parts, accessories Moscow Free classified ads Kia s6d head Replacing the cylinder head Kia Sorento BL Car service (repair) Kia, Hyundai in Moscow GNTI replacement valve stem seals without removing the cylinder head Video reports from the world of science.

After the move, there were quite a lot of cardboard boxes in our garage. And instead of just throwing them away, my wife and I decided to build a play slide for our little daughter. And here's what came out of it.

Gathering tools and materials

To build the play complex, we used:

• Two large cardboard boxes made of very thick cardboard.
• Several recycled cardboard boxes for the roof.
• Black plastic straps.
• Short and long self-tapping screws for drywall.
• Lumber to strengthen the foundation.
• Wood glue and a hot glue gun.

From tools:

• Nice sharp knife.
• Small hand saw.
• Side cutters.
• Cordless drill with crown cutters.
• Cordless band saw.
• Circular saw.

Important! The cardboard for the base of the slide was so thick that even I could not punch a hole in it with an awl. It was much easier to use a cordless drill to drill the hole.

In terms of value, the entire construction cost us absolutely free: the cardboard was left after the delivery of the heating equipment, along with several wooden materials and fasteners. And all the tools were purchased long before that.

Building floors

Since one box of thick cardboard is smaller than the other, this gave us the idea to make the building two stories high. I folded all the flaps inside the big box, placed it on level ground, and placed the smaller box on top of it.

To hold the top box in place, I drilled holes in the cardboard and tied the boxes together with plastic ties. In this way, I walked around the entire perimeter, making sure that the ends of the ties were outside and the children could not scratch themselves about them in the future.

After the zippers were tightened, cut them off with side cutters.

Cutting doors and windows

Using a hand saw, we cut out doors and windows in cardboard, taking into account the growth of our child. We cut a handle in the door, and again use plastic ties as hinges. On the second floor, we cut an opening under the door for the stairs and under the window.

Installing the roof

A plastic dome was used as a roof - gardeners and gardeners use it as a mini-greenhouse, planting plants in the ground in early spring. In our case, the transparent roof fits perfectly with the top cardboard box.

We collect a ladder from cardboard tubes

Among the remnants of the packing material were four strong cardboard tubes. They were long enough to build a safe staircase, so I decided that two of them would be uprights, and from the remaining two I could cut 4 steps. To do this, I used a saw, and cut them into the desired parts.

To attach steps to posts:

• in each of them I cut grooves along the line;
• inserted pieces of thick cardboard, smearing them with glue;
• put steps on them;
• assembled the ladder together;
• attached the ladder to the house with self-tapping screws (twisted from the inside).

We make a slide from cardboard

The next step is the arrangement of the slide. First, I build a solid frame from a bar, then I sheathe it with cardboard, which I laid in several layers for strength, and then attached the structure to the house at the level of the doors of the second floor.

For the slide, it is important to give the right angle so that the child’s legs are first on the ground when descending, and the child himself must be in a sitting position.

We carry out tests

After all the parts have been firmly connected to each other, we carefully examine the entire structure:

• Trim or smooth out any rough or pointy areas.
• Additionally, we glue the fasteners (heads of screws and self-tapping screws) with cardboard.
• We check for strength, and if we don’t like the result, we reinforce this place with a plastic fastener or a piece of cardboard folded several times.
• We personally conduct tests - I climbed the stairs, sat at the top and went downstairs. The cardboard construction withstood my 82 kg weight without any problems.

The only thing we haven't worked out is the lack of any protection from the rain. Therefore, in the event of precipitation, I will have to move the entire structure to a covered terrace or garage, or cover it with a tarp.

Bennelson shared his experience from instructables.com

If you want to express gratitude, add a clarification or objection, ask the author something - add a comment or say thanks!

When it comes to the most beloved childhood toys, most adults name a maximum of 2-3 pieces that they never let go of. Anyone modern child amount various toys can be measured in tens. But from this number there will always be the most beloved. For some children, they are miniature toys that are produced by entire families: a family of bunnies, cats, or others.

Not every adult will remember when last time was at the zoo. But the child will not only remember, but also tell in detail who he saw there. For most children, the theme of animals is very close. Of course, each child has his own preferences - someone likes fish and hamsters, and someone loves predators. If there is a little animal lover in your family, then invite her to do it..

Sometimes we are all too modest and at the right moment we do not dare to say the main words to our most beloved person. There is one child a year when such words are not only possible, but necessary. February 14 is Valentine's Day. On this day, all lovers (and not only) exchange love messages - valentines. By tradition, they are made in the shape of a heart, but your Valentine should..

Giving gifts is just as much fun as receiving them. At the same time, it is absolutely not necessary that the gift should be expensive. For example, you want to please a work colleague or a good friend, but don't know how. There is an option how to do it simply and tastefully. Write good wishes and put it in an envelope, which should not be postal, but made by yourself. AT..

If life is a game, then the best actors in it are children. From childhood, a child, playing with dolls and soft toys, completely immersed in the world invented by him. Most girls love to play with dolls, imitating the lives of adults. Therefore, they require toy furniture, clothing and other accessories. You can help your daughter make little things for the dolls to play with. This tutorial will help you...

It is rightly said that it is not the gift itself that is valued more, but the attention. We all want to take care of our loved ones, but we often look for special occasions to do so. Small surprises and gifts do not require solemn occasions at all, they can be given at least every day. You can surprise your loved one by giving him a heart. It is easy to fold it out of paper using the origami technique. Our..

Who doesn't love taking pictures of their growing children? Loving parents strive to capture every step, every moment in the life of their child. Surely, every family has several photo albums, as well as packs of photographs that have not found their place in them. If you still don’t know what to do with them, then you can combine business with pleasure and arrange photos that were not included in the albums into paper ones ..

People face the manifestation of love all their lives. From birth, children feel the love of their parents, and as adults, they themselves surround their loved ones with care and reverent love. Valentine's Day is a good occasion to give a piece of your love to everyone you care about. Perhaps the main symbol of love is the heart. Therefore, a small do-it-yourself paper wreath of hearts...

In most adults New Year associated with childhood memories, when parents put up a Christmas tree, and then the whole family decorated it. This tradition still exists in many families today. The very process of decorating a forest beauty is a special pleasure for children. It is they who most of all love not only to participate in the design of festive decorations, but also to make crafts with their own hands. Therefore, they..

Imagine that you have a little red book in your hands. No, this is not a passport, but just a small thing that a child can do if desired. Many children enjoy making notebooks, notebooks and diaries for themselves and even for their toys. Do not stand aside and you, engage in joint creativity with your child. With your minimum participation, you will succeed..

Helpful Hints

1. Prepare a cardboard box, rotate it as shown in the image and cut off the top of it (see image). Set aside the cut pieces of the box.

2. Put the box on its side and connect the sides using tape.

3. Turn the box over and tape the pieces together where the yellow arrows point.

4. We make the roof of the house. Prepare those parts of the box that you got rid of at the beginning. Use adhesive tape to connect these parts in the place where the arrows point.

5. Tape the roof to the main body of the house.

6. Dotted lines (yellow) indicate where to cut the cardboard.

7. Connect the parts indicated by the yellow arrows (see image).

This is the house you will get.

How to make a house (castle) out of cardboard

Making such a beautiful castle is not difficult at all. You can easily fold it and store it conveniently.

Such a house can be placed on any surface (floor, table)

You can make both a castle and a simple house, a fire station or a store - it all depends on what exactly you want.

You will need:

plain paper

Scissors (clerical knife)

Pencil

Acrylic paint (felt-tip pens, pencils, crayons)

1. On plain paper, draw a diagram of future walls. Adjust to desired dimensions.

2. Make windows and doors large enough for a child's hand to fit through.

3. Decorate the walls to your liking. For this, use acrylic paint (gouache), pencils, felt-tip pens and even pieces of fabric that can be glued with PVA glue.

4. When all the walls are decorated, simply insert them into each other, making cuts in the middle of each wall - one wall on top, the other on the bottom.

* Cuts must be made to the middle of the wall.

Another do-it-yourself cardboard house

Model of a house made of cardboard (photo)

How to make lamps (chandeliers) out of cardboard

Such a simple and very inexpensive cardboard lamp can decorate a kitchen, a veranda, a pantry and even a children's room.

You will need:

Bulb

Paint (optional)

Scissors or utility knife (if needed)

Cardboard crafts on the theme "Arctic"

Easy and inexpensive to do These are such beautiful toys made of cardboard.The cold climate is home to a wide range of wildlife, including deer, polar bear, and Siberian husky, all of which can be made from cardboard.

For a complete picture, you can make sleighs and Christmas trees.

Draw diagrams of all the details and cut them out, then assemble them.

What can be made from cardboard: gift bags

If you turn on your imagination, then you can make original gift bags out of nondescript cardboard packaging.

You will need:

Cardboard (can be from old boxes)

Scissors (if necessary)

bright ribbons

DIY cardboard toys: "Slides"

You can make this cardboard craft with your child. He will like to participate in the creation of an interesting toy, which he will continue to play with pleasure.

You will need:

A small cardboard box (you can use cereal or rice)

Scissors

Tennis balls (or any balls of small size and weight)

Crafts from paper and cardboard: "Big slides"

This toy is made according to the same principle as the previous one, only the sizes are larger here.

You will need:

Scissors or utility knife

Part of a large cardboard box or packaging

Cardboard cylinders (from toilet paper or paper towels)

PVA glue (you can "Moment")

* If the cardboard cylinder is not too long, try gluing several cylinders together with tape.

* If necessary, cut the cylinder with a utility knife.

* You can cut the cylinders in half to see how the balls descend on them.

* Apply glue to the side of each cylinder (or halves of the cylinder) and glue the "hill" to the main cardboard part (see image).

* you can roll tennis balls, small cars, etc.

How to make craft "Town" out of paper and cardboard

If you have a large cardboard box left, a few boxes, a cardboard sheet, or a few cardboard sheets, then you may well make a small town for a child.

This toy has a very good effect on the overall development of the child.

* When using a large box or sheet, all you need to do is cut off the extra details and start drawing the road.

* If there is no big box, then use tape to connect all the details to make a big city. It is worth noting that you need to glue the adhesive tape on the back of the cardboard, otherwise it will be inconvenient to draw with a marker.

* After you have drawn the road, paint some houses, important city buildings (fire station, for example), a railway, etc. with bright colors.

DIY cardboard layouts: catapult

You will need:

small cardboard box

Tight rubber ring (or hair tie)

Pencil

Matchbox

Toothpicks (matches)

Scissors and/or utility knife

Adhesive tape (adhesive tape)

1. We make a basket (from which the "shells" of the catapult will fly out).

Prepare a matchbox or a small piece of cardboard.

Use duct tape to stick the basket to the pencil and set the blank to the side.

2. Prepare a small cardboard box.

Make the necessary cuts with scissors and fold it so that you get a figure, as in the image

Make a small hole in the middle on the side (for a tight elastic band)

Make the same hole on the opposite side.

Pass the elastic through one of the holes

Insert a few toothpicks (matches) into the loop formed and tighten the loop to fix them

Repeat the same on the reverse side

* It is worth noting that the elastic must be well taut for the catapult to work well.

3. Start twisting the elastic inside the box (see image). Do it in the middle.

4. Gently insert the pencil with the basket into the twisted rubber band.

5. Now you can lower the catapult and release it.

The art of creating figures and shapes out of paper is called origami. This work has been known since ancient times, it is very popular today. Even if you have never done this business before, you will be able to make a simple paper slide, it is very interesting and exciting.

To keep the lines neat and precise, iron them with a ruler several times. Take a square piece of colored or white paper and cut it exactly in half. Work will happen only with one part of it. Fold the working part in half lengthwise, and then again lengthwise and in half. We get a long narrow strip. Let's turn it one turn and straighten it well.

Now fold it in half wide. Next, fold the edges of the paper one third, iron several times and return them to their original position. Then bend the corners of the paper at the transverse fold in the form of triangles, while you will open the double edges of the leaflet.

When wondering how to make a paper slide neatly and beautifully, you need to pay attention once again to the fact that the folds must be carefully ironed. Without forgetting all these tips, we continue to form a paper slide, lay out our slide in length and turn it over with the other side towards us.

Now we bend the edges of the wide part a third inward, we get a narrow strip of the same width. The part with the sides along the edges is the slope of the paper slide, and from the other part we fold the ladder. That is, we bend the part without sides with an accordion. We straighten the accordion ladder, fix the corner of the slide. That's it, the paper slide is ready.

This is such a miracle in a matter of minutes, easy and simple. It is useful to teach children this sacrament of origami, it will seem to them a real magical miracle trick, interesting and exciting. And such exercises significantly improve fine motor skills, logic, attentiveness, develop analytical thinking, perseverance, instill accuracy and accuracy, enhance mental and creative activity.

It is better to start with simple figures and shapes, gradually mastering more complex shapes and paper compositions. You can make for a child or teach him to make figures on his own, and then play them together. To a paper slide, you can make paper men, animals, cars, and so on.

For children, this is a whole fascinating world created by their own hands. And adults in the creative process forget about their problems and stress. Subsequently, you can learn how to work with glue and scissors, fastening several figures into one large part, making cuts so that the figure looks more voluminous and spectacular.

Quick article navigation

Cardboard is easy to bend, cut, paint, glue, stitch and hold its shape, and it is always available. What you need for children's creativity, development fine motor skills, hand-eye coordination, logical thinking and imagination! In this article, we presented 13 super-ideas, 100 photos, 1 step by step master class and a selection of video tutorials on making DIY cardboard crafts.

Where to get cardboard?

For the manufacture of children's crafts, except for sheet color or corrugated cardboard from the store, you can use the following improvised and junk materials:

• Cardboard boxes (you can ask the warehouse workers of the nearest store);
• Disposable paper tableware;
• Bushings from toilet paper and paper towels;
• Packages of cereals and sweets, such as corn flakes;
• Egg packaging (it is good to use cells);
• Dairy product packaging.

13 Cardboard Craft Ideas + Master Class

Idea 1. Construction toys

Cardboard "constructors" are good because they are easy to make and decorate, it is interesting to assemble and, of course, play with them. You can come up with and design such a toy yourself, or you can make it with the help of finished scheme from our article or found on the Internet.

Click on the photo to download the templates for these figurines

Idea 3. Puppets or just puppets with moving parts

Making a puppet out of cardboard is very easy and fun. You just need to draw the details of the little man, cut them out and fasten them with mini pins (sold in scrapbooking stores).

• Instead of special fasteners, you can use thin wire (for example, for beading). Just cut a piece of wire 2 cm long, thread it through the holes of the parts and twist its ends from the front and back sides as shown in the photo on the right. You can also use metal rings as fasteners.

If you want the figurine to become a real puppet, then you can:

• Connect the arms and legs with a single thread, as shown in the photo below, or with two threads (one thread connects the legs, and the other connects the arms).

• Tie a rope to each arm and leg, then tie all 4 ropes to the ends of the sticks folded crosswise. An example of such a puppet is shown in the following photo.

Idea 4. Finger puppets

Finger puppets are made even easier and faster: a small figure is drawn, then two holes are cut in its lower part. Voila, the first "actor" for the puppet theater is ready! In the following selection of photos, you can get some ideas for finger puppets.

Idea 5. Ground, air, water and space transport

A car, plane, bus, ship, boat or rocket made of cardboard is just as good as a store-bought one. After all, making such a toy with your own hands together with your parents already seems like a fun adventure. And when the cardboard vehicle gets tired, it can be used to make other toys and crafts.

Idea 6. Kitchenette

If you have a couple of boxes square shape, then why don't you make a mini stove and sink out of them?

From one rectangular box elongated shape you can make a refrigerator.

If there is enough space in the room, a washing machine can also be added to the kitchen.

A master class on how to make cardboard crafts in the form of kitchen furniture, see the following video.

Idea 7. Toy equipment and household items

Need props for role playing or things for arranging a cardboard house? We offer to make them from cardboard with your own hands.

Idea 8. Masquerade costumes

AT kindergarten or is the school approaching a matinee or a performance? Or just your kid loves reincarnations? From cardboard you can make an amazing outfit. Here are photo examples fancy dress from cardboard for boys.

And here are photo examples of cardboard costumes for girls.

Idea 9. Bookmarks for books

For making bookmarks, it is better to use not too thick colored cardboard, and in order for the craft to last as long as possible, it should be laminated with transparent tape.

Idea 10. Aquarium with fish

Cut off the lids of the cardboard box and paint its inside in blue-blue tones, if desired, decorate the aquarium with applications from plasticine, sparkles, colored paper, etc. Cut 3-5 holes along the top of the box and thread through each hole. Next, cut out 3-5 fish from colored paper. Attach a large button (on the outside of the aquarium) and a fish to each thread. That's it, the aquarium is ready.

Idea 11. Town in a box

You just need to cut the sides of the box and paint on the inside and... voila! You get a city with roads, with which the child will play for hours, moving cars and figures of men.

Idea 12. Volumetric toys made of corrugated cardboard using quilling technique

Volumetric crafts can be "wound" using the quilling technique from corrugated cardboard. Having mastered the skill of forming various figures, the child will be able to experiment with shapes and colors and even create figures of their favorite cartoon characters.

Materials and tools:

• Cardboard box;
• Tracing paper or white tissue paper;
• Black cardboard (you can paint ordinary cardboard with a thick layer of black paint);
• White pencil;
• Wooden skewers, straws or wire;
• Scotch tape and / or glue;
• Scissors;
• Stationery knife.

STEP 1. First we need to make the theater body. To do this, cut off the lid from the box, and then cut out its bottom.

Step 2. Cut off a piece of tracing paper that is larger than the size of the box. Gently glue it to the sides of the theater with a little tension, as shown in the photo.

Step 4. Now it's time to cut out the characters of the future performance from black cardboard. Keep in mind that the more detailed the silhouette of the figurine is, the more realistic the shadow theater will be. Therefore, it is best to draw figures using the templates found on the Internet and printed.

Step 5. The shadow theater is almost ready, it remains only to glue the figures to wooden skewers or wires. You can stick them as shown in the photo below or perpendicular to make it easier to control the characters.

Helpful Hints

1. Prepare a cardboard box, rotate it as shown in the image and cut off the top of it (see image). Set aside the cut pieces of the box.

2. Put the box on its side and connect the sides using tape.

3. Turn the box over and tape the pieces together where the yellow arrows point.

4. We make the roof of the house. Prepare those parts of the box that you got rid of at the beginning. Use adhesive tape to connect these parts in the place where the arrows point.

5. Tape the roof to the main body of the house.

6. Dotted lines (yellow) indicate where to cut the cardboard.

7. Connect the parts indicated by the yellow arrows (see image).

This is the house you will get.

How to make a house (castle) out of cardboard

Making such a beautiful castle is not difficult at all. You can easily fold it and store it conveniently.

Such a house can be placed on any surface (floor, table)

You can make both a castle and a simple house, a fire station or a store - it all depends on what exactly you want.

You will need:

plain paper

Scissors (clerical knife)

Pencil

Acrylic paint (felt-tip pens, pencils, crayons)

1. On plain paper, draw a diagram of future walls. Adjust to desired dimensions.

2. Make windows and doors large enough for a child's hand to fit through.

3. Decorate the walls to your liking. For this, use acrylic paint (gouache), pencils, felt-tip pens and even pieces of fabric that can be glued with PVA glue.

4. When all the walls are decorated, simply insert them into each other, making cuts in the middle of each wall - one wall on top, the other on the bottom.

* Cuts must be made to the middle of the wall.

Another do-it-yourself cardboard house

Model of a house made of cardboard (photo)

How to make lamps (chandeliers) out of cardboard

Such a simple and very inexpensive cardboard lamp can decorate a kitchen, a veranda, a pantry and even a children's room.

You will need:

Bulb

Paint (optional)

Scissors or utility knife (if needed)

Cardboard crafts on the theme "Arctic"

Easy and inexpensive to do These are such beautiful toys made of cardboard.The cold climate is home to a wide range of wildlife, including deer, polar bear, and Siberian husky, all of which can be made from cardboard.

For a complete picture, you can make sleighs and Christmas trees.

Draw diagrams of all the details and cut them out, then assemble them.

What can be made from cardboard: gift bags

If you turn on your imagination, then you can make original gift bags out of nondescript cardboard packaging.

You will need:

Cardboard (can be from old boxes)

Scissors (if necessary)

bright ribbons

DIY cardboard toys: "Slides"

You can make this cardboard craft with your child. He will like to participate in the creation of an interesting toy, which he will continue to play with pleasure.

You will need:

A small cardboard box (you can use cereal or rice)

Tennis balls (or any balls of small size and weight)

Crafts from paper and cardboard: "Big slides"

This toy is made according to the same principle as the previous one, only the sizes are larger here.

You will need:

Scissors or utility knife

Part of a large cardboard box or packaging

Cardboard cylinders (from toilet paper or paper towels)

PVA glue (you can "Moment")

* If the cardboard cylinder is not too long, try gluing several cylinders together with tape.

* If necessary, cut the cylinder with a utility knife.

* You can cut the cylinders in half to see how the balls descend on them.

* Apply glue to the side of each cylinder (or halves of the cylinder) and glue the "hill" to the main cardboard part (see image).

* you can roll tennis balls, small cars, etc.

How to make craft "Town" out of paper and cardboard

If you have a large cardboard box left, a few boxes, a cardboard sheet, or a few cardboard sheets, then you may well make a small town for a child.

This toy has a very good effect on the overall development of the child.

* When using a large box or sheet, all you need to do is cut off the extra details and start drawing the road.

* If there is no big box, then use tape to connect all the details to make a big city. It is worth noting that you need to glue the adhesive tape on the back of the cardboard, otherwise it will be inconvenient to draw with a marker.

* After you have drawn the road, paint some houses, important city buildings (fire station, for example), a railway, etc. with bright colors.

DIY cardboard layouts: catapult

You will need:

small cardboard box

Tight rubber ring (or hair tie)

Pencil

Matchbox

Toothpicks (matches)

Scissors and/or utility knife

Adhesive tape (adhesive tape)

1. We make a basket (from which the "shells" of the catapult will fly out).

Prepare a matchbox or a small piece of cardboard.

Use duct tape to stick the basket to the pencil and set the blank to the side.

2. Prepare a small cardboard box.

Make the necessary cuts with scissors and fold it so that you get a figure, as in the image

Make a small hole in the middle on the side (for a tight elastic band)

Make the same hole on the opposite side.

Pass the elastic through one of the holes

Insert a few toothpicks (matches) into the loop formed and tighten the loop to fix them

Repeat the same on the reverse side

* It is worth noting that the elastic must be well taut for the catapult to work well.

3. Start twisting the elastic inside the box (see image). Do it in the middle.

4. Gently insert the pencil with the basket into the twisted rubber band.

5. Now you can lower the catapult and release it.

13 cool ways to make a track, track, parking lot, slides, car wash, garage, road for kids with your own hands. All this can be done from ordinary materials that almost everyone has at home. Let's take a look at these creations.

1. Do-it-yourself foam (cardboard) track for children's cars.

Track for cars, which can be done with children and for children. Fast, clean, easy and economical. All we need is:

• white foam, if it is not there, then you can use a large cardboard, having previously painted it;
• decorative tape;
• scissors;
• wooden cubes, if they are not available, then you can use any building blocks that you have at home;
• brushes.

Paint wooden cubes acrylic paint. Colors can be any, we have pastel colors of yellow, carrot, blue color. We mark the route with a simple pencil, then paste over it with decorative tape. That's all, the track is ready. You can play with it at home, on the street. Easy to store it is flat, you can hide it under the bed or behind the closet.

2. Do-it-yourself car wash for cars from a cardboard box.

Cool idea for summer time. With such a car wash, you can play on the street, in the country, since you can really wash children's cars there. Children just love to play with water. And here you can spray cars from a spray bottle.

To make a children's toy, we need:

• cardboard box;
• cellophane to paste over the walls and floor of the car wash;
• felt;
• wooden bushings, and two toilet paper bushings;
• scissors, hot glue.

We start by cutting off the roof, one sidewall of the cardboard box, and on the opposite side we do something like a door. Next, let's start painting. It is necessary to paint over all the outer walls and the bottom of the box, so we will protect it from moisture.

After the box dries, glue the cellophane to the inside. You probably guessed that this will save the box from moisture and it will last longer.
We cut the felt and glue it to wooden bushings (you can also sticks), to toilet paper bushings. We attach everything to our car wash. Kids can play with this for hours.

3. Do-it-yourself children's road.

Very simple road from a cardboard box. All you need is time, desire and creativity. But seriously, cardboard, pencil, scissors, paint, brush.

From the box we cut out with trees, houses, and then color it all. Children will color everything with pleasure, and at the same time we stimulate the development of creativity and fine motor skills in our little ones.

4. Racing track for children's cars.

Racing track for the descent of four cars at once. It is easy to make it with your own hands, and children will love it very much, because four cars can move along it at the same time. Both boys and girls will be able to figure out which car goes faster.

To make the track, we need:

• cardboard box;
• hot glue;
• paint, brushes.

Just lift the cardboard and the cars will rush down quickly. This is a great toy for home when it's bad outside. Older children will especially like it, because they love speed and movement.

Below is a slide made of a wooden board, more durable, large. You can't do without a dad. Stock up on material and call dad.

Detailed instructions with large quantity photos in.

Children's fun for creative kids and parents. Everything is very simple, but very interesting. With such entertainment, it is advisable to take paints on water based to make it easier to wash soiled clothes.

5. Do-it-yourself parking for children's cars from shoe boxes.

A simple parking lot (garage) made from shoe box lids, toilet paper rolls and cardboard.

6. Large multi-level parking with a cardboard city.

Over such a structure it will be necessary to puff a little. The work is painstaking, but what a wonderful city for cars it turns out. There are trails, slides, multi-level parking. In a word, great!

Still very interesting option cardboard crafts - garage-parking. These are the houses for cars you can make yourself, but also play with them. For those who decide to make such parking garages - a link to a site with a description and photos.

Other do-it-yourself car parks and garages made of cardboard, ideas for inspiration.

7. Do-it-yourself wooden parking for children's cars.

Cool parking for small children's cars. It is made of wood so it will last a long time. The safety of the child is also thought out - there are no sharp corners in it, they are all beveled. For those who decide to make such a parking lot, see the instructions and description.

8. Do-it-yourself road for cars.

This is perhaps the easiest way to make a children's track for small cars. You only need special tape and scissors. If desired, you can add plastic figurines traffic lights, houses, trees, in general, what you have at home.

Children's track, even the whole city. Detailed description You can view

Here, a children's road made of adhesive tape was glued to cardboard, thanks to which it can be moved around the house and even taken outside.

And here they glued adhesive tape in the form of a road directly to the floor.

And here we went even further, gluing adhesive tape directly to the sofa and carpet. Interestingly, many parents agree to this. But how fun and comfortable for children. If you do not have a special adhesive tape with the image of an asphalt road, then you can use colored tape or ordinary electrical tape. If desired, it can be marked.

9. Road for cars on an old wooden table.

If you have an unnecessary or old wooden table, then it can be turned into a track for children's cars. Mark the table with paper tape before painting. After painting, wait until it is completely dry. The road for children is ready.

Large and wonderful table with game zones. How to make such a toy for children yourself, see

This version of the road for children's cars is convenient because you can draw it as you like and as much as you like. To do this, you need a piece of chalk and your or a child's imagination. To make such a game table for cars, you need to cover the table top of the old table with a special paint for chalkboards, on which you can draw with chalk. That's all the table for children's cars is ready!

10. Height meter in the form of a race track.

For little lovers of cars, parents can make such a bright height meter in the form race track. We mark the growth of the child with a typewriter, which is attached according to the Velcro principle. The road can be made of any width, with the number of lanes equal to the number of children. The photo shows that there are two children in the family. If you are interested in a stadiometer, then Full description its production can be seen

11. Road for children's cars on the wall.

The road for cars can be made right on the wall in the children's room. Thus, we get an interesting design and play space for the child. The road itself can be made magnetic or made of felt, and magnets or Velcro can be attached to the cars, respectively.

12. Do-it-yourself carpet for cars made of fabric.

Rug-road made of felt with a surprise. He has a garage for three cars, these are pockets at the bottom. It is great that such a rug can be folded and it does not take up much space. It can be made of any size with any applications - mountains, trees, houses, hospitals, towers, skyscrapers, roads, slides, parking lots, various markings and all possible road signs. See this site for ideas and instructions with lots of photos.

13. Children's street track for small cars.

In the manufacture of such children's tracks for cars, you will need cement. You dig a shallow trench in the ground, fill it with cement, paint it with black paint, and decorate the entire site. This is the perfect option playground for private houses and cottages.

Here are a few more options for outdoor play areas for boys from improvised material.

In conclusion, I would like to offer the most fun and funny way for a children's road for small cars. Children will not be bored, but dad or mom will get a wonderful massage and a portion of relaxation.

Thank you for reading our article to the end! Merry and have a nice day you and your children!

Date: January 13, 2017

Close … [X]

The part with the sides along the edges is the slope of the paper slide, and from the other part we fold the ladder. That is, we bend the part without sides with an accordion. We straighten the accordion ladder, fix the corner of the slide. That's it, the paper slide is ready. #6 Here is a miracle in minutes, easy.

#1 The art of creating shapes and forms out of paper is called origami. This work has been known since ancient times, it is very popular today. Even if you have never done this business before, you will be able to make a simple paper slide, this.

An exact approach to the unsupervised regularized least-squares classification problem, implemented in Python using the Numpy and the Scipy packages. The learning problem considered is a variant of the maximum margin clustering, task which can be regarded as the direct.

Tilda dolls are designed by Norwegian designer Tone Finnanger. Here I will post patterns for the most common and beloved by all puppeteers of Tilda dolls and toys. I will write more about the history of creation later. But you can read interesting stories about others in Tales.

In this example, a penguin was made from a balloon. In this section, to help parents, we publish articles and materials on the preparation and holding of the New Year holidays. A homemade snowman is a wonderful craft for the New Year. Each strip must first be folded in half lengthwise, a.

However, it is still more interesting to show imagination to strengthen the forks on the wall above the desktop (install photo-1 in an old sugar bowl (use gypsum for fixing or a floral sponge as a temporary remedy, combine photo-2 on a common basis (photo-6). Or simply creatively bend.mirrors and clocks with.

All these conditions will reduce the cost of building an artificial reservoir. It is desirable that the bottom and banks of the pond consist of clay or loam soils that are impermeable or less permeable to water, or are lined with them. If the bottom is sandy, the water will not hold. When creating an artificial

Noise block head 2 rio kia Spectra kia spectrum Auto parts, accessories Moscow Free classified ads Kia s6d head Replacing the cylinder head Kia Sorento BL Car service (repair) Kia, Hyundai in Moscow GNTI replacement valve stem seals without removing the cylinder head Video reports from the world of science.