Make a car out of cardboard. Do-it-yourself car from a cardboard box! Modeling paper cars

No boy can imagine his life without his favorite car. You can, of course, buy a car in a store. But, it is much more interesting to make it with your own hands.

Children are happy to show imagination, making toys together with adults. If there is a sheet of cardboard or a cardboard box at home, you can easily make a car for a young racer out of it. In our article we will tell you in detail how to make a car out of cardboard.

Children's creativity is not only a fascinating process, it is also the upbringing of perseverance and imagination in a child.

You will need

In order to make a car out of cardboard, you should prepare everything you need in advance:

a sheet of cardboard or a finished cardboard box of medium size,
stationery knife,
plastic or paper cups
paints,
Ruler and pencil,
adhesive tape,
colored paper,
a couple of corks from plastic bottles,
multi-colored markers.

The clerical knife is very sharp, so an adult should do all the work with it.

Making a car

To make a car out of cardboard, you need to do the following:

In order to make the body of the machine, you need to take a cardboard box. If there is none, we make a box of cardboard ourselves, fastening the edges with adhesive tape.
On the sides of the box we draw future car doors.
Carefully cut out the doors with a utility knife.
Next, use a knife to cut out the windshield. To do this, cut off a piece from the top surface of the box so that on one side it remains attached to the box.
We bend the part cut off from three sides up - this will be the windshield. You need to make a hole in it for the glass. First you need to outline everything with a pencil and a ruler, and then cut it out with a knife.
Behind the windshield, we bend the back part inside the box - we get the car seats.
We paint the body of the car with bright colors.
We make headlights for the car from bottle caps, glue them in front.
We make wheels from plastic cups. To do this, cut out the bottom of the cups, leaving a centimeter at the walls and glue on both sides of the machine. When the glue dries, the wheels can be painted black.
With colored markers we apply various logos and decorations to the body of the machine.
Inside the interior of the car we paste over with brown paper - an imitation of a leather interior.

The car is ready! Your fidget can hit the road.

One of the most exciting leisure activities is doing crafts. A special type of needlework that both adults and children like is paper designs. Origami paper machine is the most popular variety, familiar in most cases to the male population of the planet.

There are many options for paper machines, ranging from the simplest configurations to 3D models. This will require a minimum set of necessary things. As a rule, it is colored paper, cardboard, scissors and glue. In more complex designs, auxiliary elements are used in the form of toothpicks (axles for wheels), plastic bottle caps, and much more.

How to make simple origami paper cars?

All you need is an ordinary A4 sheet and a little time.

Fold the sheet in half lengthwise. Then bend the resulting corners at an angle of 45 degrees. The corners are bent on both sides. You should get bends resembling arrows.
Bend the side elongated sides to the middle. The edges of the previously obtained arrows should cover the curved sides.
Then bend one of the sides together with the arrow to the other edge, and tuck one arrow into the other.

Now, following the diagram, it will be easy to assemble an origami race car out of paper. You can color it however you like.

Average level

For more complex designs, a diagram and detailed instructions are provided. As a case, you can use a finished cardboard box. The size of the machine directly depends on the dimensions of the box.

Draw doors on the sides of the box and cut out window openings.
The doors are cut in such a way that there is some margin next to the hood.
Wheels are also made from cardboard by cutting out circles from it. For greater strength, you can prepare several circles at once and glue them together. Make holes in the center, into which the axles will then be inserted.
Holes are made in the lower part of the body, axles are inserted (skewers, toothpicks, and so on) and wheels are put on them.
For the windshield, you can use a regular plastic bottle. In the front of the structure, a hole is cut out for the windshield, and the plastic is fixed with adhesive tape.

Intermediate level - option number 2

How to make origami paper cars using improvised materials?

In the previous version, skewers, scotch tape and a plastic bottle were additionally used.

For a simple racing model configuration, you can use a cardboard base from under toilet paper. The same roll will serve as the basis for the wheels.

The surface of the roll is cleaned of glue.
Next, small holes are made in it for skewers, on which future wheels will be strung. They are cut separately.
The side holes in the roll are sealed with cardboard circles, sizes corresponding to the holes themselves.
The base is painted in a suitable color, and a hole is cut in the upper part for the driver's seat. It can be either oval or round.
The resulting cardboard cover can not be thrown away, but made into a seat by attaching it to the body with adhesive tape.
Attach wheels.

We made a retro model of a sports car.

Retro cars

In order to make a classic passenger car, we need:

paper;
scissors.
The sheet must be square shape. It is folded in half on one side and in the same way on the other, so that folds are obtained on the unfolded sheet, dividing the sheet into four equal squares.
Fold the bottom half in half so that the edge touches the center. On one side, bend the edges so that you get a triangle.
Cover the resulting shape from above with the other side to the middle of the sheet, and bend the edges in the same way as the other half.

You can build a hatchback model.

Take paper of any color square shape. Fold it in half.
One third on both sides is bent to the inside of the sheet.
Then all four corners are bent.
A small section of the vertices of each resulting triangle is slightly wrapped inward. It will turn out a peculiar form of future wheels.
Bend one of the remaining two corners inward.
Make an incision on the other corner and also bend inward. From it the windshield and the front part of the passenger car (hood) are obtained.

That's all - volumetric model hatchback is almost ready. It remains to decorate it as you wish, draw windows and doors.

How to build a Cadillac

You can assemble an origami car from paper of a popular model. Using paper material different colors, you can make a whole fleet of Cadillac models.

The execution technique is almost identical to one of the above schemes (hatchback).

The sheet is folded in half.
Then divide each side into three parts.
Bend the resulting sashes in different directions.
Turning the layout over, in the upper, main part, make bends on the sides, giving a peculiar shape to the car body.
Bends are made on the sides for the wheels. For stability, the corners of the wheels are bent.
In place of the proposed headlights, small bends are made. The transport is ready.

There is a diverse selection of car models that both adults and children can make out of paper.

For example, official cars are also popular.

The model of a fire engine is assembled from matchboxes glued together. There are enough of them four pieces, which are then pasted over with red paper.

For the car tower, another box is taken and installed at the very top of the structure.
A flasher can be built from plasticine, and matches are glued for the stairs.
Doors and other attributes are made of colored paper.

Schemes for paper origami cars are attached.

Alternative design

Recently, more and more attention has been paid to the modular origami technique.

The overall design consists of many paper modules small size. Depending on the design model, the modules are attached to each other either by friction or with glue.

If the intended design consists of ten or more rows, then glue is used, since the product will not withstand its own weight and will crumble into elements.

Papercraft technique

Despite the foreign name, this technique is familiar to many from childhood. This is a process when the future product is cut out from the finished template, bent along the specified lines and glued together.

The advantage of this technique is that there is no need to reinvent the wheel, and the finished models are completely reminiscent of the real ones.

The Internet offers a wide range of templates. Both lovers of modern cars and connoisseurs of retro models will find options for themselves here.

It is interesting that such a hobby can develop into a good source of income. And an example of this - real stories from life. What is only an ordinary American Taras Lesko. His unique car models are known to many. And the assembly process of the Audi A7 model even took pride of place in the promotional company of the German concern.

Alexandra is a constant expert of the PupsFull portal. She writes articles about play, pregnancy, parenting and learning, baby care, and mom and baby health.

Is it possible to imagine boys without a toy car? They love to spend time playing with cars, but building a metal model is quite difficult. In the article below, we will tell you how to make a car out of paper, what options are easy to make on your own.

simple car

Paper toys are no less interesting to play than plastic and metal models. Playing with such products, you can arrange races, make a garage for your toy. Each child will be able to decorate the craft in any color.

For the design process, take:

sheet A4;
scissors;
markers.

Having collected such a list, you can begin to manufacture a simple machine. How to make a paper car now you will learn.

Manufacturing process of a simple machine:

take a sheet and cut a square out of it;
fold the cut square in half;
turn the edges in the opposite direction and bend back to the middle;
we bend the extreme sides in the reverse order and connect the figure in half;
now on the workpiece, you need to apply sketches that will resemble a car;
for application, it is necessary to wrap the upper corners and fill them in the middle;
as a result, we get two corners, which in the same way, we add one small one into another large one;
it remains to make wheels;
for this, you need to bend the lower corners back;
then we round them with scissors and get the front wheels;
in the same way we make the rear wheels;
it remains to bend the corners to get headlights and decorate the product in any colors, and draw windows and doors.

After spending 10-15 minutes, you learned how to make a car out of paper simple option and pleased with the crafts of their child.

origami car

The technique of Japanese paper art (known as origami), makes it possible to fold leaves from unique craft, including cars.

Making a car using the origami technique requires patience, the presence of colored paper, scissors and glue. You can connect your child to crafts of this type, he will only be delighted with your invitation and will learn how to make toys himself. Note that together with the baby, you can make a whole fleet.

Making an origami machine step-by-step instruction:

This option takes about 5 minutes to make. Now not only you will know how to make a paper toy, but also your child.

Sports car

Earlier, we talked about how to make a paper car of a simple version, now we will complicate the work and make a racing car. This toy is able to move, for which it is enough to put the craft on a slippery and flat surface and blow on her. For the manufacture of such a model, only office paper is needed.

Manufacturing process:

The machine is basically ready, it can be

Bushing machine

To make a car model for the little ones, use the remaining toilet paper roll. How to make a paper toy for a baby, we will describe below, and now we will list what materials and tools are needed:

toilet paper;
brush and paints;
scissors, compasses and cardboard;
glue;
a pair of toothpicks.

The manufacturing process goes like this:

We take a roll of toilet paper, clean the sleeve, paint with any color of watercolor paint. After the paint is completely dry, we point the emblems with a pen or draw an image of racing symbols.
We take cardboard and with the help of a compass we draw 4 circles on it, which will later be wheels. After marking them, cut them out and paint them in black.
Now, it is necessary to pierce holes for toothpicks on the base of the sleeve with a needle or awl. Then we insert toothpicks into the holes and put wheels on them.
Cut out a semicircle from the top of the sleeve and bend it to the top. He will act as a windshield of the finished craft.
If there is a desire, then in the middle of the car you can put a little man. To do this, cut out the silhouette from the sheet and fix it in the middle with adhesive tape.

Let's open a little secret, the wheels will spin, but so that they do not fall off while driving, you need to drip glue from the outside and wait until it dries. Now, you know how to make this type of paper machine.

Truck

We note right away that a cardboard truck will look more interesting if it is made voluminous.

To make a truck, prepare:

cardboard or thick paper;
scissors and glue;
wooden skewers for canapés;
double-sided adhesive tape;
plastic container;
compass and pin.

Having collected the entire list of materials and tools, we proceed to manufacture:

We take thick paper or cardboard, cut out 4 squares from it for constructing a cabin, 3 identical rectangles and 2 squares for making a body. We put the cut out elements in 2 boxes and fasten them with tape.
We take the squares that are intended for the cab and cut holes in them for the front and side windows. Now cut out plastic bottle, pieces and fix them with adhesive tape on the cut out areas.
We glue the cabin and body into a single piece.

We figured out how to make a car body out of paper, now let's start making wheels. To do this, you need to take a black colored cardboard, mark eight identical circles with a compass. We cut out circles, and to make them more stable, we glue them in pairs. In the middle of each wheel, you need to make holes with a pin.

Similar holes are made in the body and cab. We put wooden skewers and put wheels on them.

Upon completion of production, you can paint the craft with paints. If it is necessary for the truck to be more stable, instead of 2 circles, glue 4. If you want the child to learn how to make a truck out of cardboard, you can bring him to work during the manufacture. And it is interesting for you and the kid is exciting to participate in the design of his toy.

military model

Military vehicles are beautifully made from paper.

For the manufacture of one of the types of military equipment you will need:

cardboard with dark green tint, or matchboxes;
wooden skewers, paper and plastic tubes;
compass, ruler and simple pencil;
glue, scissors, black paint and a brush.

Getting Started:

Having done such work, you get a wonderful military vehicle with missiles, which, by the way, drives. For realism, military equipment can be painted with dark camouflage spots.

Big cardboard machine

Using cardboard, you can make a large car for a child. In this case, we will tell you how to make a fire truck out of paper.

Such a machine is made from:

five cardboard sleeves;
two peeled spools of adhesive tape;
several cardboard boxes;
adhesive tape (including masking tape);
paint glue and paper napkins;
four cocktail tubes;
newspapers and matches.

Having collected the entire list, we proceed to manufacture. Manufacturing process of big carton machine:

Upon completion, it will be seen that a toy similar to a fire truck has been made.

papercraft machines

Boys often have a desire to design cars using the papercraft technique. This is a technique by which blanks of parts are cut according to a finished template. But it is not always possible to purchase a book from which car elements are cut out and glued together.

You shouldn't be upset modern technologies, such as the Internet, make it possible to find options for cars, transfer the image to paper and make a car for yourself. Many people wonder how to make a paper craft toy without special books with details? Yes, everything is simple here.

The first thing to do is to find and print a drawing of the car. It can be a sports car, racing car, special construction equipment and many other options.

The assembly scheme is carried out according to the layout, but in order for the design to turn out correctly, your task is to cut all the parts evenly from the printed image. After printing, you should pay attention that the white elements are the places where the parts are connected. Glue is applied to them and the parts are fixed together.

(2)

For babies similar hobby very interesting, can captivate him for many years, while he will collect more and more new car models. And who knows, maybe after growing up, children's fun, he will be attracted to a similar kind of activity in the field of mechanical engineering.

You don't have to be a billionaire to create your own unique collection of hand-built racing cars.

An excellent racing car, no worse than a Ferrari, can even be made of paper with your own hands, it is worth making a little effort.

Racing car from a cardboard roll

So, what is needed to create a do-it-yourself movable cardboard machine, the photo of which you have already seen:

several cardboard tubes of the same size;
paints, brush and water;
very thick cardboard;
compasses or any object with a rounded base of a suitable size;
colored paper for decoration (it will be more convenient to work with self-adhesive paper);
glue (PVA or polymer);
Nickel-plated push pins.

A paper machine will be stronger and more durable if it is based on a paper tube from toilet paper. This cardboard tube is easy to turn into a car body, and cut out the rest of the details from ordinary cardboard.

First, color in bright colors our cardboard tubes will be sports car bodies.

We cut out circles from thick black cardboard - four times more than the tubes prepared. These will be the wheels. If there is no black cardboard, you can use non-colored, and then paint.

For each wheel we draw a disk with white paint. You can cut discs from white and glue.

We make circles in advance, which we paint like the steering wheel of a car. You can also prepare different decorative elements- arrows, stripes, flames. We turn the dried body of the machine into a real racing car: we cut out the cabin (we bend one part of it upwards, like the back of the seat). On the other - the opposite side - we glue the steering wheel. Be sure to give each typewriter a number and decorate it. We attach the wheels to the body with nickel-plated pushpins, and now our sports car is ready for the real tests!

And if you want, with kids younger age you can use such machines as material to consolidate mathematical skills. For example, to compile a rating table in which the numbers of cars are marked in the order of their arrival at the finish line. The child must line up the cars in accordance with the table.

fire truck out of the box

You can make a very effective fire engine out of the box. To do this, we need a rectangular box, for example, from under milk. We wrap it with red paper or paint it red.

We glue a window, wheels and a ladder to it.

Many people know that a lot of types of crafts can be made from cardboard. In childhood, for sure, any person with a fantasy and a desire to do something with their own hands did something from such an accessible material. Few people know, however, there are people who have not given up this childhood hobby, and make truly amazing things out of cardboard.

Today we will tell you how to make a car out of cardboard.

Show all

Beautiful car

She will surely delight your little one.

So what we need:

At least two pieces of cardboard boxes;
colored paper;
Scissors;
Compass;
Colored pencil or felt-tip pen;
Copper wire;
Pliers;
Glue.

Cut off its walls from the boxes and draw circles on them, these will be the wheels for our future car. Then cut them out with scissors.

After attaching the circles to the base of the second box, trace with a pencil the places where the wheels will be located.

With an awl or scissors on the sides, make holes where the center of the wheels will be located.

Cut off pieces of the prepared wire as long as the width of the future machine. This will be the basis for the wheel axles.

Attach the wheels with glue to the pieces of wire threaded into the holes. If you want the wheels of the car to spin eventually, use pliers to clamp the ends of the wire on both sides in the form of eyelets.

Then we will make the car beautiful appearance. To do this, use a pencil to draw and paint windows and doors, then cut them out with scissors. Or they can be cut out of paper - self-adhesive suitable color. If you have the time and patience, you can make the doors open.

In the same way, you can create a cardboard trailer for her, it will be more fun. You can attach it again with a piece of wire.

By the way, if inspiration attacks you, you can make a few more trailers, then you get a whole road train.

You will need the following materials for this craft:

Sheet of cardboard.
Paint, brush for coloring.
Glue or stapler.
Scissors.
Unnecessary and obsolete old toys to decorate the car.
Seven round cardboard tubes left over from toilet paper.

Color paper cardboard tubes in different colors in any way - with a brush or using a piece of cotton wool. Then cut out circles from cardboard, they will serve as cylinders for the car and paint them.

Glue these wheels to the sides of the car using glue or a stapler.

And now we will tell you how to make a car out of cardboard using modern computer technology.

racing car

You will need:

Paper
Printer
Scissors

This type of craft is easy to execute, you just need to print it, carefully cut it out and glue it along the drawn contours. Such blanks can be found as much as you like on the Internet, an example of one of these is shown in the figure below.

How to make a car out of large cardboard?

Glue all parts of the box with tape.

On both sides, draw the doors symmetrically on both sides and cut them out with a sharp knife with a thin blade.

In the same way, draw and cut out the windshield.

Using adhesive tape, fix the bent parts of the ends with a bend inward, now using it, fix the windshield.

If he has extra pieces in the corners, cut them off with a knife or scissors.

Using the bottom of paper cups, make wheels for the future car. If they are not at hand, you can simply use round pieces of cardboard of the desired color and size.

Now color your creation and admire it!

Simple and cute machine

Shape a piece of paper into a square. Who does not know, it is done like this: bend the sheet diagonally and cut off pieces that protrude beyond the edges. Cut off the excess with scissors.

Bend the square into two halves, then two more times along and across. This will show you the fold lines. Now you can expand the sheet.

Wrap its lower ends to the very top of the middle. Then, on both sides, bend the lower parts of the bent corners, you will get wheels out of them.

Everything that turned out in the end, fold in half along the line that is along the central fold. Bend the lower part up and bend the upper right corner.

Draw headlights and other details for the product, paint in any colors. We hope this simple craft will make your child happy.

Girls car

Few parents realize or understand that not only boys, but also girls can play with cars. Below we will tell you how to make a car in order to carry your favorite dolls in it. I think your daughter will love this craft.

So, what you will need to have on hand:

One cardboard shoe box;
Thick cardboard;
Thin paper of different colors;
Glue;
Double-sided tape;
Long wooden sticks in the shape of toothpicks;
A small piece of clear plastic;
Anything that looks like headlights.

First, draw a door template on paper that would fit the size of the toy. The usual length of the legs, for example, the Barbie doll, which girls love so much, is eighteen centimeters.

Cut off both sides of the workpiece and bend inward the tips of the resulting template. On these tips we will mount the seats.

Then make cuts with a sharp knife where the car seats will be.

Now cut out even circles from colored and thick cardboard, four of each. These will be the wheels.

Using a needle or an awl, make through holes in the center of these circles and then make more of them.

From thick cardboard, cut out the hood and trunk according to the size of the shoe box.

Glue each prepared part to the car in turn, then make holes for the wheels in the box.

Using colored paper, glue the car, then make the windshield using transparent plastic.