Making crafts for some people is a real pleasure. And it's especially nice to do it before the New Year. It is worth noting that New Year's crafts can be completely different. And they are created, as a rule, from those materials that are at hand. Plastic bottles are just such a material that is available in every home. Do you know that you can make wonderful New Year's crafts from them? plastic bottles with your own hands. And just such ideas we have collected in this article.

What crafts to make from bottles

Toys from plastic bottles for the New Year.

Many of you are probably already familiar with the elementary options for such crafts, but how do you like the idea of ​​​​considering more complex toys? It is somewhat time consuming, but it is also more effective.

Snowman.

First New Year's craft from plastic bottles to school can be made with the child. As a basis, you need a bottle consisting of a pair - a triple of connected spheres.

Also prepare the felt and thread to match it, the color is not important.

From this felt it is necessary to make a hat with a scarf, for a hat a felt rectangle is sewn along the cut line, and tightened with a cord or thread from above.

Paint the bottle with any paint White color. We glue the cap to the cork, and tighten the scarf on the neck - the narrowing between the spheres.

If from cotton pads glue tight balls and glue them in the middle of the body, you get handles.

Eyes can be glued purchased from a needlework store, and buttons, nose and mouth can be painted with any paint.

Such a snowman on any Christmas tree will look very elegant.

Surprise in a box.

For the base you need a bottle without ribbing and without bends. If the neck is cut off, then in the work we use the remaining high part.

The bottom needs to be covered with artificial snow and in the center on a thin stick (for better stability) we place a snowman, also homemade, can be sewn using the soft toy technique.

From above we close our box with the bottom from another bottle of the same diameter. You can secure them with double sided tape.

On the connection line, you can stick an elegant ribbon.

The surprise is that when you shake the box, the snow begins to fall on the snowman.

closed tunnel.

As in the previous version, we cut 2 identical bottles and use only the upper parts with necks, only one is longer, the other is shorter.

At the bottom of the long part we place felt toy in the form of a snowman, tightly connect both parts of the bottle, they should hold tightly.

We close the plugs with tinsel / rain, so that they would not be visible.

Here is such a New Year's toy - a bauble.

Animals.

Here we need bottoms from bottles that are identical to each other. We connect them into one fixed part, you can use double-sided tape.
We paint the resulting part with white, after drying we paint its ears, nose and eyes, draw paws, and now it turns into a white teddy bear.
From black bottles in the same way, you can make a penguin.

Christmas tree.

It will require 3 green PVC bottles, and scissors with tape.

The bottoms and necks are cut off from all three bottles, and the even tubes obtained, cutting one of them, are twisted into a thinner tube and placed on a stand from one of the necks.

The remaining 2 are cut into rectangles 3x6 cm.

From the folded edge we cut the fringe, preferably from 1 to 5 mm.

Now we glue these blanks with fringe with adhesive tape around the tube to the stand.

We glue the next tier on top of the adhesive tape that fixes the previous tier.

We remember that the lower branches of the Christmas tree are longer, and the upper ones are shorter, we are also building our Christmas tree.

Finally

Of course, these are not all New Year crafts made from plastic bottles. In our article, only a part of them was given. A variety of toys from plastic bottles depends only on your imagination. Do not be afraid to turn it on at full power and be creative to the fullest, attract children, they will definitely serve you more than one interesting idea for crafts!

Material courtesy of svoimi-rukamy.com – Read original

You may like:

• Drawings on the windows for the New Year 2018 with toothpaste, ...
• Knitted crochet rugs: interesting models, diagrams and...

Wonderful is coming winter holiday- New Year 2020. It's time to decorate your house for his arrival so that Santa Claus on his magic sleigh does not pass by and leaves good gifts under our Christmas tree. It is very interesting to decorate the Christmas tree and rooms with handmade toys for the holiday. The very process of their manufacture is fascinating, however, like any creativity. Such crafts can be made from the simplest materials, for example, from plastic bottles. From ordinary plastic bottles, you can make a lot of interesting and beautiful things that will successfully replace store counterparts. Our today's story is dedicated to the 7 best and original crafts made from plastic bottles for the New Year 2020, which will be held under the sign of the White Metal Rat. Let's look at them in detail in our article.

Christmas tree

An unusual Christmas tree can be made from simple plastic bottles. It is important to collect the right materials for this craft and follow the master class step by step.

This will require:

• Plastic bottles;
• Scotch;
• Sandpaper (cardboard);
• Scissors.

Progress:

1. The bottom and neck of the bottle should be removed, and then a straight pipe will turn out. Then you should prepare blanks from twigs. They should be different sizes to make the Christmas tree cone-shaped.
2. Then plastic bottles need to be cut lengthwise into 3 parts so that subsequent tiers are less than the previous ones. On each blank, you need to make needles, and for this they are cut into thin strips, but not completely. In order for the Christmas tree to stand steadily, it is advisable to use the bottom of one of the bottles as a stand.
3. A sheet of cardboard must be rolled up into a tube and installed in the neck of the bottle. You can secure it with tape. Now each tier of branches needs to be fixed on the tree. You can put a toy on top or come up with something else. To make the Christmas tree fluffy, the needles should be cut thinner. Usually blue or transparent bottles are used for this. That's all, our craft is ready!

Christmas balls

You can decorate your Christmas tree with handmade toys. In work, it is important to follow all the steps step by step, and then you will get wonderful products.

This will require:

• Plastic bottle;
• Glue;
• Rain;
• Any shiny jewelry.

Progress:

1. The paper needs to be wrapped around the bottle: this will help mark blanks on it. It is necessary to cut 4 rings 1 cm wide. Then the rings must be fastened together according to the “crosswise” principle and secured with glue. The result should be a ball of plastic strips. You need to choose beautiful threads or rain so that the toy can be used for the Christmas tree.
2. To decorate the resulting blanks, it is better to use foil, beads, beads, etc. A small ball can be placed inside such a ball. In this craft, you can fantasize as much as you like. For children, this will be a very interesting activity.

Snowflakes from plastic bottles

To expand the range of crafts from plastic bottles for the New Year 2020, you can also make snowflakes from the bottoms of bottles as a Christmas tree decoration. This process will be possible for beginners in this creative business.

For work you will need:

• Scissors;
• Acrylic paints of white, blue, golden, silvery colors - to choose from;
• Plastic bottles, preferably blue;
• Paint brush;
• Wire;
• Pliers.

Progress:

1. We take plastic bottles and cut the bottom as low as possible to the base with a clerical knife or scissors, leaving only the corrugated part.
2. After the bottoms are ready, we take up the painting of our future snowflakes. Depending on the desired pattern, we select the thickness of the brush, and then proceed to the artistry. As drawings, you can use various ornaments that come to your mind. This also applies to the choice of color of paints with which you will decorate your New Year's product.
3. When your snowflake has turned into a beautifully painted masterpiece, let it dry, and use wire and pliers to make a small eye for the thread. Fasten it to the snowflake and pull the thread into this ring.

Well, our New Year's toy for Christmas tree decorations is ready, which you now have the right to be proud of. A do-it-yourself snowflake can serve as a worthy decoration not only for your home, but also kindergarten if you have Small child, and also act as an exhibit at the exhibition at the school of New Year's products.

Penguins from plastic bottles

original christmas decoration your house for the New Year 2020 can become penguins from plastic bottles, which should be placed in rooms and under the Christmas tree as a decor. Such a craft will delight all your relatives and guests, and especially children. Without spending a lot of time, you will create a real masterpiece of art with your own hands, which will cause a lot of positive emotions and sincere smiles from your household.

For work you will need:

• Plastic bottles (one toy takes two bottles);
• Scissors;
• Acrylic paints - white, black, red and others;
• brushes;
• Small colored shreds for a scarf;
• Buboes or bows for hats;
• Glue.

Progress:

1. We take a bottle and cut off the upper part almost completely or in half to get the body of a penguin. The head is already made from another bottle and also from the bottom, but the workpiece should be slightly smaller.
2. We connect both blanks, inserting the upper part, which is smaller, into the lower, which is larger.
3. After you have built the body of the penguin, proceed to its coloring. Take acrylic paints and apply gently on a plastic product, imitating the color of a penguin, as shown in the photo. Use more bright colors, because the brighter your New Year's penguin turns out, the warmer and more fun the smiles of your family will be.
4. When your penguin gets a realistic look, you can tie a small scarf around his neck, and attach a bubo or bow to the hat with glue.

Here is such a cartoon miracle you got!

Video tutorial on making penguins from plastic bottles

golden bells

Golden bells will look original on the New Year tree. Such work is carried out very quickly and is suitable for kindergarten.

This will require:

• Plastic bottles;
• Acrylic paint, if desired instead acrylic paint you can use fabrics, ribbons and accessories.

Progress:

1. For work, you should take bottles of 0.5 liters each, but more is possible if the tree is very large. The bottom of the bottle should be cut off. To get the bell petals, you need to cut the edge of the bottle in the form of a zigzag. Since the resulting edges will be sharp, care must be taken.
2. The petals of our crafts need to be made pointed, and with a knife you can give them a shape. To make holes for the rope, you need to heat the knitting needle and make holes. You can do this job with scissors, but be very careful. At the end of the work, the bells should be painted, and they will dry within an hour. To give the products a New Year's look, they need to be decorated with tinsel, garlands or sparkles. The instruction is simple, and you can do the work in your sequence.

Plastic bottle candlesticks

This will require:

• Plastic bottles;
• Scissors;
• glue gun;
• Universal glue.

Progress:

1. With your own hands, you can make a wonderful candlestick for the holiday. Bottles can be used different colors. Containers must be cut in half. The edges of the part that remains with the bottom should be cut into strips, not reaching 4 cm. The strips can be of different widths. The resulting container will be a stand for a candle.
2. Strips of plastic should be melted over the candle. Then, using a glue gun, you need to attach a candle in foil. The space near the candle can be decorated with beads or pebbles. So the candlestick will have a small weight, our craft is ready.

Video master class on making candlesticks

Cone

You can make original cones with your own hands, this plastic bottle craft will perfectly decorate your Christmas tree and home for the New Year 2020.

This will require:

• Plastic bottles;
• Scissors;

Progress:

1. From a plastic bottle, you need to create squares, after which their corners should be rounded. The result will be products, like chamomile. After that, you need to process the edges of the petals with a candle so that they fall down.
2. All details must be strung on a thread in descending order. Between them you need to insert a bead. Then you need to make a sprig of spruce and fix it on the cone. The product is ready to create a festive atmosphere.

In this article, we will tell you how to make do-it-yourself Christmas decorations for a street Christmas tree using available items. Everything ordinary can be turned into something beautiful and magical.
Decorations for the New Year's beauty are not made from anything: polystyrene, cardboard, cones, pieces of wood and even bottles with light bulbs are used. And every piece is unique in its own way. Look at the photo. These balls are handmade from styrofoam.

It is important to know one important detail. On New Year's Eve, the weather is not always good, it rains often. Therefore, your crafts should not have something that is washed off or soaked. When the tree is in the house, use whatever you want there.

styrofoam crafts

The material is easy to process and by itself. It will not split, break or hit anyone if it suddenly falls off a branch. Do-it-yourself Christmas toys made of polystyrene foam can be made in any form and in many ways.

Getting ready for work

We need materials and tools:

• Styrofoam;
• soldering iron;
• paints;
• sequins;
• needle and thread;
• glue;
• sandpaper.

Keep in mind that you are making decorations for a street tree, so glue with paints must be resistant to water and frost.

With a knife, we will process a foam blank. The knife should have a thin, sharp blade because the cut should not be too rough. The same applies to the emery skin, choose "zero". Sandpaper will be needed for final processing: we will remove irregularities (burrs, extra tubercles) with it. With the help of paints, we will color our craft, and then lightly cover it with sparkles. We will make a hole with a needle, and send a thread from which a loop will turn out.

Choose strong threads, as a strong wind can easily rip off the decoration!

With a soldering iron, if desired, you can apply recesses in the form of patterns. Glue will be needed if you want to attach to a toy, for example, beautiful bow from tape.

Observe safety precautions when working with a soldering iron! When processing foam with this device, poisonous smoke will be released that can cause cancer. Keep this in mind, work in a well ventilated area. It is advisable to use a mask or respirator to protect the respiratory system.

Making beautiful balls

It is best to make Christmas decorations from foam balls with your own hands. They are very common in craft stores. This option is offered because you can’t make a ball out of ordinary foam wrappers. We need balls big size, since we will hang them on a street tree. How more tree, the bigger and brighter the toy!

So let's take a clean foam ball and prepare a flat foam pad. We paint it in any color with resistant indelible paint. In order not to get your hands dirty and not to smear the paint from the ball with your fingers, use two toothpicks and stick them into the ball, as shown in the photo. You can paint with a brush or spray can. We stick toothpicks with a ball into the stand and wait for it to dry.

After the ball is dry, you can paint patterns with other paint or glue something beautiful on it. You can apply patterns with the tip of a soldering iron tip, for example, in the form of snakes. Here, play out your imagination. Then take a needle with a thread in the eye and pierce the part of the ball that you think is the top.
The figure shows exactly how to pierce the toy.

Many people use paper clips as a suspension, simply sticking them into the ball, and then tying the thread. In our case, this option will not work: a strong wind will calmly tear the ball off the suspension. The simpler the design, the more reliable it is!

We tie both ends of the thread into a knot, and hide the knot itself. The finished craft will look like a store-bought plastic Christmas tree ball.

Styrofoam figurines

Styrofoam Christmas decorations can also be made flat, in the form of various figures. You will need foam boards. First, with a pen or felt-tip pen, we make a drawing on the foam. Then carefully start cutting. Rough surfaces need to be sanded with sandpaper, otherwise the craft will not look so beautiful.

For example, we want to do beautiful snowflake. We draw it on the foam, then we begin to cut out the internal places.

Always start by cutting out the interior. This is much more convenient, and the risk of breakage of the toy is significantly reduced.

Now we start cutting out the snowflake itself from the foam sheet. It will look beautiful and without painting. It is better, of course, to paint it in silver, gold or metallic blue. A hole must be made from the upper ends so that the snowflake on the Christmas tree is turned with its front part to the viewer. If you pierce directly on the plane, then the snowflake in limbo will turn to us with an edge.

Do not limit yourself to flat figures. cut out voluminous crafts in the form of bells, birds, Christmas trees and so on.
By the way, such Christmas toys can be made from foam balls. For example, a snowman.
You will need balls of different sizes. One is big, another is smaller, and the third is even smaller. Glue them together carefully with strong glue. You don’t need to paint such a craft, because the snowman should be white anyway. Use indelible markers to draw his mouth, eyes, nose and buttons. You can make him a little hat.

Amazing snowflake - video

From plastic bottles

There are a lot of options, both simple and complex. Plastic Christmas decorations are perfect for a street New Year's beauty. They also do not get wet, have a small mass and are easy to manufacture.

Only large bottles, 1.5 or 2 liters, will do. Toys from small bottles will be poorly visible on a street tree.

Let's make a Christmas tree toy from a plastic bottle with our own hands, which will serve as a bird feeder. We will need supplies:

• 2 liter plastic bottle;
• scissors and awl;
• paints;
• strong nylon thread;
• tinsel, ribbons, etc.

In this option, it is a large bottle that is suitable so that the birds have room to eat in it.

We take the bottle and begin to paint it in any bright color, along with the cap. Spray painting doesn't take long. We are waiting for the paint to dry. We decorate the bottle with ribbons, for example, we knit a bow and fasten it with glue. You can also use stickers. Then we cut out a small round window (diameter 8 cm) in the wall of the bottle so that it is as close as possible to the bottom. The photo shows interesting options bottle feeders, where the upper parts are made in the form of a roof.

First you need to paint the bottle, wait for it to dry, and only then cut out a window for the bird. The paint should not get where the food will lie. An animal can inadvertently swallow a piece of dry paint and get poisoned.

Now unscrew the cork and punch a small hole in it. Take a thread and make a loop. It is better to make the knot large (tie several times). We put the end of the loop so that the knot rests on the bottom of the lid. A simple and useful feeder toy is ready. We hang it on the Christmas tree, pour food and admire the birds.

Flashlight bottle and delicate bells

A very simple option, familiar to everyone since childhood. Such Christmas decorations from plastic bottles are also easy to manufacture and process. We will need everything the same as for the feeder. Only now we will cut vertical stripes on the walls.

For this procedure, a sharp thin knife or scalpel is perfect. It is better not to use a razor blade, as they can easily get hurt.

We cut the strips, the gap between them should be approximately 5 mm. The length of each strip is 15-20 cm, depending on the size of the bottle. Now we need to squeeze the bottle so that all the strips bend in different directions. Let's start painting and decorating. Something bright and shiny can be put into the inner cavity of our flashlight.

A plastic bottle and disposable teaspoons will make a wonderful Santa Claus.

A white bottle will make a unique snowflake.

Green bottles will be the basis for the Christmas wreath.

A little patience and more bottles will turn into a big snowman after a while.

Do-it-yourself disco ball for a street Christmas tree - video

Plastic bottles are used everywhere. As a rule, empty bottles immediately go to the scrap. However, if you have imagination, free time and desire, you can create stylish and unusual crafts based on them. Besides, the New Year is approaching, and Christmas decorations are quite expensive. So why not make them yourself using used plastic bottles, available materials and tools? In this article you will find how you can make DIY Christmas crafts for 2018 from plastic bottles, helpful tips and recommendations.

Delicate bells

Bells are one of the most popular symbols of the New Year and Christmas. It is believed that they bring happiness and good luck to the house. Therefore, they must be present in the festive decor. Such jewelry can be purchased at the store, or you can make a bell from a plastic bottle. To create a bell you will need simple materials and tools that can be found in every home. For decoration, you can also use various materials, such as rhinestones, beads, ribbons, nail polish or sparkles. Decor can be bright or subtle.

Materials and tools:

• Plastic bottles of various sizes.
• Scissors.
• Paints and brushes.
• Several types of nail polishes.
• Stationery knife.
• Candle.
• Awl or thick needle.
• Various decorative elements.
• Glue gun.

Most often, bells are made in pairs. Therefore, you will need at least two plastic bottles of the same size. The neck should be cut off from plastic bottles, after which you can proceed to coloring them. The height of the bell can be absolutely any, and depends on the size of the bottle, as well as on the distance at which the base is cut off. Then you should jinx the cut line. To do this, the easiest way is to hold the bell with the lower part over the candle flame. This must be done carefully so as to only slightly warm the bottle. Otherwise, it may be deformed.

It is recommended to give preference bright colors and fairly large ornaments. For this, it is not necessary to use paints. To make the bells bright and the lines thin and neat, you can use nail polishes instead of paint.

If you plan to decorate the bells with ribbons, you should make small holes in them. To do this, it is best to use an awl or a thick needle. In order for the tool to better enter the plastic, and also to leave a neat hole, the awl should first be heated over a candle. An additional hole should be made on top of the bells in order to attach a ribbon or rope to the bell, for which it will be attached to the Christmas tree.

You can decorate these bells in any way. Openwork braid, bows, ribbons, sequins, rhinestones, beads and other decorative elements will look great. The use of only lace and bows in combination with the painting of a bell in light currents will make such crafts incredibly delicate and beautiful. For those who love bright Christmas decorations, you can use tinsel, a large amount of sparkles and shiny sequins for decoration.

Christmas ball from a bottle - video

Snowflakes

The snowflake is a symbol of the New Year and is traditionally used to decorate the house and the Christmas tree. Delicate snowflake to decorate the Christmas tree original craft for the New Year from plastic bottles. Most often, plastic bottles are simply thrown away only for use. However, if you arm yourself with simple tools and imagination, you can make your own unusual snowflakes which can decorate the Christmas tree, curtains, walls and other items holiday decor. Snowflakes are made from the bottom of a plastic bottle, so for a large number of blanks you will have to collect bottles in advance.

Materials and tools:

• Plastic bottles of various sizes in transparent, blue or light blue.
• Stationery knife and scissors.
• Paints.
• Thin tape.
• Nail polish or oil paints.
• Tassel.
• Awl.
• Decorative elements, such as sequins, beads, beads, sequins and others.

First you need to make blanks. Of the entire plastic bottle, only the bottom is used to make a snowflake. It is most convenient to cut off the bottle with a clerical knife, and then trim the edges with scissors. Using an awl, it is necessary to make a hole in the workpiece, which will be used to attach the tape. This will allow you to hang the finished snowflake on the Christmas tree.

To apply a pattern on snowflakes from a plastic bottle, you can use white or blue paint. The choice of paint color depends on the color of the base. For clear bottle any will do the color of the paint, and for blue or blue it is best to use white paint. To make the drawing more vivid and the lines thin, it is recommended to use nail polish instead of paint. Additionally, you can cover the whitewash with glitter varnish. This will give it smoothness and shine.

To hang a toy on a Christmas tree, you need to attach a ribbon to the craft. If you hang several snowflakes on a long ribbon, you can make an original garland based on such snowflakes to decorate windows, walls or a Christmas tree.

Volumetric Christmas toys

Many people prefer to use to create stylish and unusual crafts to decorate the Christmas tree, improvised materials, for example, plastic bottles. This allows you to make exquisite things, save money, and also give new life unnecessary things. One of the most popular materials for creating Christmas decorations are plastic bottles.

New Year's toy from a plastic bottle can be different material depending on the size of the bottle itself. Therefore, plastic bottles can be used to make toys for decorating the Christmas tree at home or outside. Making such toys is quite simple, so even small children can be involved in the business.

Materials and tools:

• Plastic bottles of the same size and color.
• Small satin ribbons.
• Stationery knife, scissors.
• Double-sided tape.
• Enamel paints or nail polish.
• Brushes for paints of different thicknesses.
• Decorative elements to taste.

First you need to make blanks for toys. For the manufacture of toys, only the bottoms of the bottles should be used, so they must first be separated from the bottles. The easiest way to do this is with a utility knife. For one toy, two bottoms are required.

On the inside of each half of the toy, you should draw snowflakes, flowers or other ornaments. You can use paints of any color. Finished blanks should be connected in pairs, and attached with double-sided tape.

The original idea is to fill toys with tinsel, confetti, sweets or other decorative elements.

Using an awl, make a hole into which you need to make satin ribbon or twine. This will allow you to hang the toy on the Christmas tree.

How to make a Christmas tree from a bottle - video

Christmas tree bells

It's hard to imagine Christmas tree no round balls. They can also be made from plastic bottles. For this, bottles are used that have a round part near the neck.

Materials and tools:

• Plastic bottles with round necks.
• Gouache of various colors.
• Paint brushes.
• Tinsel.
• Sequins.
• Double sided tape.
• Sequins, sequins and other decorative elements.

First you need to make the bases for the toys. To do this, you need to cut off plastic bottles so that you get semicircular toys. The resulting toys should be painted with gouache, oil paints or nail polish, especially if the bottle is white or transparent.

Additionally, you should decorate the toy with tinsel, which is best attached with double-sided tape. Also, balls can be decorated with glitter, sequins, beads and other decorative elements. You can hang the balls on a ribbon, twine or thread.

Original crafts from plastic bottles for the New Year with your own hands will allow you to stylishly and unusually decorate the Christmas tree, as well as get the most out of making unusual crafts.

Santa Claus from a bottle - video

Plastic bottles terrify all environmentalists on our planet. The problem is that repeated use of this (seemingly) convenient device harms the body. How to be? The answer is simple - creativity. Christmas toys from old bottles they will create incredible comfort. Making them will be as easy and pleasant as possible, and we will show and tell you how to make them with your own hands. Let's start with the video.

The easiest craft

For this craft you will need:

• the bottom of the bottle;
• paint / felt-tip pens / markers;
• needle, thread, fishing line;
• paper;
• ribbon.

It is necessary to cut off the bottom of the bottle (you can take any volume). And then conjure over it: paint or leave the original color, decorate with snowflakes, make a hole and thread a fishing line on which the toy will hang on the Christmas tree. You can make a single design using the same fishing line. All this can be seen in the photo below. We have selected several master classes.

Balloons from a bottle

In this case, we just need to cut our bottle into strips. These strips should be the same length and width. They must be glued from one end, and then from the other in such a way as to get the future christmas ball. This ball can be decorated in any way you like: - Metal Ox, so you can build on this, and also refer to traditional New Year's symbols (sequins, ribbons, red / green / gold colors, rain, cones, etc.).

Bottle bells

Bells in the form of a New Year's toy will decorate the Christmas tree with their presence. How to make them - you need the top of the bottle, because it is similar in shape. You will need paper, foil, paints, tinsel, fishing line, ribbons, glue. Part of the bottle must be wrapped with foil, fixed with glue (preferably instant fixation) and decorated with snowflakes, tinsel, etc.

One two Three! Shine Christmas tree!

For this Christmas tree toy, you will need several bottles. Again, we take several upper parts, cut them into small strips, put them on top of each other. The lower part can serve as a base. They can be fixed with glue, but this is an optional item. Decorate with balls, beads or tinsel.

A few more ideas...

Bottle toys are only your imagination, which can be realized literally with your own hands. Any colors can be used. The shape is up to preference. It is not necessary to take small bottles, for example, you can make Santa Claus from a five-liter bottle (you can make a beard from plastic spoons). Lids can also be Christmas tree toy. We've picked up a few ideas.