Dear needlewomen, today we will crochet women's headbands. And in order for you to have a choice, let's go through the patterns and descriptions of knitting various models: winter, openwork, with a bow and others.

Warm winter crochet headband

Warm winter set by Drops

For those who like not to close their heads much in the cold season, we offer a bright set of a warm knitted winter bandage and a crochet neckerchief. It will need to be knitted from woolen yarn so that your ears do not freeze.
For sizes: 54/56cm; 56/58cm
Collar size: 58-62 cm, height 24 cm.
Prepare:
- yarn with characteristics 50met / 50g, consumption for a bandage 50 grams, for a collar - 150 grams;
- hook No. 9 and No. 10
Density: 4-4.5 stars = 10cm

How to crochet a bandage?

We will knit the model in rows back and forth, dial 45/47 air loops.
Star pattern for bandage and collar:
1 row RS: Cast on 5 sts. on the hook, starting with the 2nd air. p. from the hook (= 6 loops on the hook). Thread on and pull through all 6 sts, then 1 air p. for a hole for 6 p., * Dial 1 pet. into the hole, then 1 p. in the last of the six p., one pet. into the air n., in which the last of the six sts was recruited, one st. in the next two air. p. (= 6 p. on the hook), thread the hook and pull through six loops, 1 air p. * - repeat to the final p .. On the last ch. do p.st / n. Turn over the bandage.
2r.IS: 2 air.p. (= 1 p.st / n), tie 2 p.st / n into the holes of all the stars, finish p. p.st / n in the last p. In total, there are 20-21 stars in the rows and one p.st / n in each.
3r.: 3 air.p., make 1 pet. in the 2nd and 3rd air.p. from the hook, then 1 pet. in the first three sts (= 6 sts), yarn over the hook and pull through 6 sts, ch 1 *, cast on 1 st. in a hole, 1 pet. in the last of six p., 1 pet. in the same loop into which the sixth p. was cast on, one loop each in the next two air p. (= 6 p.), pull the thread through all six p., ch 1 * - repeat until the last p. In the last v.p. - 1 p.st / n. We turn over.
Repeat the second and third p. again and again the second p. (3 p. stars).
Cut the yarn, leaving the end for sewing, pull through the last loop. Sew along the short side and secure the tip.

Knit a neckerchief in the same way with an asterisk pattern at the rate of 47/51 p. Crochet No. 10.

European style model

New pretty model crochet headbands for women, made in European style from the designers of Drops studio. Such a headdress is more suitable for spring or autumn, despite the fact that it is made of woolen yarn. Knitting it is not difficult, even a novice craftswoman can handle it, because the only pattern is based on single crochets. Having mastered it, you can easily tie a bandage.
Sizes: 54-56; 56-58; 58-60 cm
For a knitted women's headband, you will need 50 grams of Drops Big Delight yarn, 100% wool 100gr / 190met and hook No. 5.

Start with 69/72/74 chain stitches and work 9 rows in single crochet, sew along the short side. Next, you need to tie a rectangle from the chain of 7 ch. 10 cm long for strip constriction. Wrap the bandage around the bandage and carefully sew along the short side.

Chic openwork

For an openwork bandage for a girl, you will need a hook No. 3.5 and 50 grams of Cotton Extra yarn, 60% cotton, 40% acrylic, 180m / 50gr or similar.

Knitting pattern:
1r .: 8 columns s / n enclose in a circle.
2p .: turn the workpiece over, we will knit the strip in rows “back and forth”, in all columns b / n of the previous river. knit 1 column b / n and 1 air loop (VP).
3r.: in all columns b / n (STBN) - 1 column s / n (STSN) and 3 VP.
4r.: 1 STBN, 1 half-column (PST), 2 STSN, 1 PST, 1 STBN - in each arch.
5p.: 8 VP, 1 STBN in the sixth p. (in the last STBN, knitted in the 1st arch of the third p.)
Repeat from the 1st to the 5th rows 10 times, then go to the straight part of the strip: starting from the ninth p. (first stsn, knitted into the second arch of the third motive) knit 14 stbn, turn the product over and knit in rows back and forth stbn. When knit 40 cm from the beginning, sew the first row to the last.

cute bows

And it doesn’t blow in the ears, and the handles are warm

The following description of the crochet headband is a white and blue pattern with a constriction. It comes with original mitts with bows. For manufacturing, prepare yarn Olga (50% wool, 50% acrylic, 392 met / 100g) - 100 grams of cornflower blue and 30 grams of white tone, hook No. 2.
Knit a bandage according to the scheme:

Knitting pattern for a model with bows

Operating procedure:

1. Start the bandage with a chain of air. thread of blue color according to scheme 1 and knit 40 rows.
2. Then with white yarn knit 12 p.
3. Sew the first and last rows of column b / n.
4. According to scheme 2, make a jumper, drag the strip with it, as shown in the photo.
5. Mitts start with a chain of 56 air stitches, connect in a circle and knit according to the scheme 1 - 12 rows.
6. Skip two rapports for the finger and continue further in rows “back and forth”, only 3 rows.
7. Then, over the missed loops, make 5 air p. and again combine the product into a ring.
8. Make 6 more rapports in height.
9. Bow: with white yarn, make a chain of air.p. equal to 8 cm and knit 3 rapports according to the pattern (= 7p). Drag the piece with yarn, forming a bow, sew to the mitt. Tie the second symmetrically.

Spring openwork headband

A lot of different balls have accumulated - put them into action!

This style of the strip is crocheted No. 2, a novice craftswoman can take it to work. You'll need leftovers mohair yarn sky blue, soft pink and blue.

How to knit a bandage? Start with a chain of air.p. pale blue tone, as long as the girth of the head, and knit according to the pattern. Knit all rows and connect back seam stb/n. Mitts start with 43 air.p. plus three sts for lifting, tie 15 p. st.s / n, then alternate colors according to the scheme. Next, continue with blue yarn, but alternate shades in reverse order, then 2 p. st.s / n. Bend the part in half, make a seam, leaving a hole for the finger. Tie around the edges blue color st.b / n. For the finger, tie the hole with three rows of st.b / n. Tie the second one symmetrically.

Bandage turban with overlap and flower

In the style of the 60s

The turban bandage has been popular since the 60s of the last century. This is a beautiful feminine accessory that can be worn not only for warmth, but also as a decoration, an addition to the image. It is made of stripes with an overlap of embossed columns.
Bandage width 10 cm per head circumference adult woman.
It will take 100 grams of yarn with parameters 50gr / 90met of any composition, hook No. 5 and No. 6.5. If you plan to wear it for the street, then take woolen threads, for going to a restaurant - viscose.
Density: 17 p. Crochet No. 6.5 = 10 cm

How to crochet a crochet turban bandage? You must understand general principle knitting: we make about a third of the length of the bandage, then we divide the loops in half and knit each sector separately for about a third, we overlap the halves, then we combine all the loops and knit the last third of the rows. This is a general pattern for knitting a bandage with an overlap. How you knit with a pattern depends on the model, but the general principle is this.

Work description:

1. Start with a chain of 17 stitches in crochet No. 6.5. Main front p.: St. s / n in the 4th loop of the chain from the hook, 1 st. s / n in each st of the chain (PC), 1 st.
   1r.: 3 VP, skip the loop at the base of the VP, (1 RLSN around the leg of the next loop, 1 embossed st. (RISN) around the leg of the next chup.) - repeat to the end of the river, tie the last RISN around the rotary Air. p.s. turn it over.
   2p .: 3 VP, skip the loop to the base of the air p., (1 RIST around the leg of the next p., 1RLSN around the leg of the next loop) - repeat to the end when you tie the last. Radar around the rotary VP, turn over.
   Repeat only 2 rows.
2. In total, you need to knit 13 rows, ending with the front p.
3. Having tied the third part of the bandage, knit separately on the first 8 loops, knit a third in length, then the second half of the same size, overlap, and knit the rest of the strip.
4. Need to decorate the strip big flower, for this, make 5 VP. 1 circle: 20 Ch, (1 st.b / n in a circle) - 30 times. Fasten and gently pull the thread to tighten the ring.
5. Then we will make a small flower: 5 VP. 1 circle.p .: (10 VP, 1 st.b / n in a circle) - 15 p. Reinforce and gently pull the yarn to tighten the ring.
6. Product assembly stage: sew the central back seam, sew on the flowers, as in the photo, place the button with the bead in the center.

Striped floral motifs

Collected knitted large crocheted flower motifs with a convex center make up a female strip purple. Knitting idea translated from Crochet magazine.
Bandage 15 cm wide, head circumference 54 cm.
It is proposed to knit with Berroco Ultra Alpaca Chuncy yarn (50% alpaca, 50% wool, 120met / 100g) - consumption of one hundred grams, you will need hook No. 8.
1 flower = 15 cm
Attention: the initial 5 air.p. count as 1 pole. with 3 crochets. All rows end with a join stitch unless otherwise stated.
What is "knit behind the back. loop loop ”- this is the name of the loop that fits behind and just below the rear wall. The photo shows the rear view of the pole. with 3 crochets and the necessary coil is shown.
Knitting pattern for a flower headband:

And for those who are pros in crocheting, I offer a knitting pattern for a women's headband from a Japanese site:

See a selection of stripes on the head with knitting needles

Needlewomen, two videos of a master class on making a bandage in the form of a braid and an openwork strip have been prepared for you:

This headband with crochet ears is just a godsend for women in cool, windy weather. Headbands have always been popular, they are comfortable and practical. They do not take up much space in the purse, and at the same time they are good "warmers" for the ears.

Even if you took the hook in your hands for the first time - let the "first test", or your first work - be a women's crochet headband. The same baby headband with ears also looks good. Schemes and descriptions are drawn up so that everything is as clear as possible.

What kind of bandages you will not find on women's heads! There are also warm ones: made of wool or mohair, or light, supporting hair - made of cotton. For spring and summer, you need a crochet cotton headband. The hook number depends on the thickness of the thread. The thinner the hook, the denser the product. Experienced knitters advise that for cotton thread it is better to take a hook of 1.75, for wool or wool with additives - 2.5. And, as you know, usually the recommended hook number is always on the yarn tag.

We will cross knit the bandage itself, and we will knit the ears separately. Cross knitting very well suited especially for beginners, as this shows the width of the bandage and can easily be made wider or narrower. It depends on how many Air Loops to collect. As knitting, the product is tried on on the head and determined with the length (volume of the head).

Abbreviations: VP - air loop, RLS - column / without / crochet, PP - half loop, p. - loop.

So, we chose yarn and a hook, and we begin to crochet a headband.

First, let's decide what pattern to knit the main part of. Someone calls this pattern "faceted elastic", but in the textbook it is referred to as "single crochet with a rib."

In any case, you need to start with air loop:

Scheme number 1.

To make such an elastic band, we collect a chain of 15 loops.

This will be the width of the band. You can take more or less p. - depends on the desired width. In the photo - a warm bandage with a width of 15 p.

We scored a chain of 15 VPs and after dialing a chain of VPs to go to the 1st row, we make 1 VP (it is called a lifting loop).

1st row: insert the hook into the second loop of the chain and knit RLS (column / without / crochet). Then - to the next p. of the chain and again RLS - and so repeat until the end of the row. At the end of the row - 1 VP of lifting and knitting turn. RLS is knitted like this:

Scheme number 2.

2nd row: we knit all the loops of the RLS for the back wall! The loop, when viewed from above, looks like a pigtail. Each p. consists of two half / loops - PP. The RP that is closest to us is the front RP. And vice versa - the one that is farther from us - the rear PP, or otherwise - the back wall.

We insert the hook into the loop from above, pick up the back wall, pull out the working thread and knit RLS behind the back wall (loop arc). We look at the photo. This is how the hook goes:

The next row - knit, like the 2nd p. The front PPs remain untied with us - they give relief to the pattern. Thus, we knit to the desired length of the strip, from time to time trying it on the head. On the video - it turned out like this gum:

When the length is sufficient to girth the head, we connect the beginning and end of knitting. You can sew the beginning and end with a needle, or you can crochet.

Finished crocheting the main part. Next we will make and sew on the ears.

We already have a knitted main part of the crochet headband for women. It remains only to understand the description of the ears and tie them.

Crochet the ears - it seems to be nothing complicated, but in fact we want to tie just such beautiful ears as in the photo. Such ears are obtained from a sliding loop and column / without / crochet. For the ears, we crochet 4 parts, and then we tie them with RLS.

First you need to make a sliding loop. I knit it like this:

We tighten the sliding loop by pulling the “tail” of the thread. We knit 1 VP in the last sc, knitting turn. Next will be the 2nd row.

2nd row: 4 sc in each p., at the top of the triangle we knit not 1 sc, but 2 sc, and then sc in each p. 1 ch and knitting turn.

So, in the 2nd row we got 9 sc and ch.

3rd row: 2 sc to the last st, sc to each st of the base to the top of the triangle, to the top - not 1, but 3 sc to one point. In the last paragraph, also 2 sc. It turned out 13 sc and VP. Turn.

So, we have in every second row in the extreme loops - we knit 2 sc, and at the top of each row - 3 sc.

When the eyelet detail is tied to the desired height, we tie the base of the RLS. We sew the ears in pairs and sew them to our bandage.

On the video - crochet eyelet step by step:

How to knit ears - option number 2

If it will be easier for you to knit ears according to the pattern, then you can use the following pattern:

Here, in this version, the ears begin to knit from 2 VPs. In the first VP, knit 3 sc, then in each row knit in the extreme columns of 2 sc. So we increase the detail of the ear in width and height. At the end tie RLS.

Another option for knitting a headband is a turban. The headband is knitted from Nako bambino yarn (25% wool, 75% acrylic, 50 g/130 m). The product took 70 grams of yarn. Hook 2 mm thick.

Calculation for a head circumference of 55 cm, the initial chain is 32 VP. We knit the product to the desired length (52 cm), repeating 3-4 rows.

On the video - a master class on the Chalma bandage in detail.

A crocheted headband can be a good addition to your look. It can be worn as a stand-alone accessory or to keep your ears warm in cold weather. A set made in the same style will look good - a scarf, a bandage and mittens.

Such a product can be made even for the smallest fashionistas who will definitely appreciate the thing. A knitted bandage can be knitted with a fabric of a certain length and then simply neatly sewn along the edges, or immediately knitted in a circle.

Crochet a bandage: an easy option

Crochet 10 air loops. You can increase or decrease the number as you wish. But keep in mind that the more loops you collect, the wider the bandage will turn out. Knit all loops with double crochets. And at the beginning of each row, do not forget to pick up air loops for lifting. Do the work until you reach the desired length of the product, which should be measured around the circumference of the head. If you are in doubt, do some fittings from time to time.

At the end of the work, cut the thread, pull the tip through the remaining loop and tighten. Sew the edges of the bandage together or tie two thin ties, you can also thread a ribbon or sew on a button.

Crochet headband in the round

Crochet a chain of air loops. Its length is calculated by the girth of the head plus loops for lifting. After connecting the edges of the chain, continue to knit the bandage in a circle with columns together with the crochet. The width of the future product depends on how many rows you knit. At the end of the work, tighten the last loop and cut the thread.

This method differs from the first in that the bandage is knitted completely and at the end it is not necessary to make a seam to connect the edges. However, it requires the skill of crocheting in a circle.

Crochet headband: patterns

Knitted headband with decor

In order to knit such a simple, but very interesting bandage, you will need: yarn, hook 2, thread and needle, decor items.

• First you should dial five air loops and one edge, then continue to work on the remaining loops. For a bandage of 50 cm, 206 loops are required.
• The first columns must be knitted with a crochet.
• When you tie all the air loops, go to the other side and knit the columns already without a crochet, which will greatly facilitate the pattern.
• Then start knitting a fan, knitting the first single crochet, then skip one loop, and then knit 4 stitches with one loop with a crochet, skip the loop again and work 1 single crochet. In the future, knitting is performed in the same way.
• When you tie the bandage along the entire length, you will need to connect its two ends, and then bring the knots to the front side. Don't worry about what doesn't come out very nice, because then you can cover it all up with some decorative element, such as beaded jewelry. The ends of the bandage can be fastened with fishing line or thread.
• Decorate the bandage however you like. You can use large beads, rhinestones and beaded crafts. The bandage is ready!

Openwork headband

• Let's try to knit a bandage in the form of an openwork fabric. To do this, we use the scheme.

• The bandage to be knitted in length should be approximately 10 cm less than the circumference of the head. Determine the width yourself.
• After you knit the bandage to required length, tie it around the perimeter " step by step». Racha step is a finishing element in which knitting goes back to front along the front side of the product from left to right. As a result, you will get a straight canvas. Now, in order for the bandage to fit snugly on the head, pick up a chain with air loops about 10-14 cm long, complete the ring and start knitting the pipe with columns, without making a crochet, continue knitting to the missing 10 cm of the product. Pass the “pipe” through the bandage, and sew the ends of the bandage to the elastic yourself or with a sewing machine.

• Place the connected "pipe" in place of the elastic, and sew it with hidden stitches. Look at your product, if it suits you, then the bandage is ready.
• For decoration, you can knit poppies according to the pattern. Assemble the bouquet and secure the bases for the brooch. All flaws and irregularities can be hidden under a knitted circle.

Crocheted headband for a girl

To crochet such a wonderful headband for a girl, you will need: crochet hook 2 and melange threads, it is best to choose Diva Batik Design 3241.

The headband for the girl is knitted in the same way as the “Headband with decor”, but it is better to decorate it in a slightly different way. Since this headband is intended for a girl, some cute bright flower from beads.

When the bandage is ready, connect the two ends and bring the knots to the front side, which will then be covered with a beaded flower. The ends can be fastened with fishing line stitches, and they will look like a whole fan.

Now let's do beaded flower. To do this, type three beads on the fishing line and make a loop, you get one stamen. Then put six large beads on the fishing line and place them so that the stamen is in the middle. Insert the end of the thread into the first bead, and then fasten the ring of beads on the opposite side. Pull the needle through the beads, pick up five beads, and make a loop. The beads should lie in an even arc. So repeat with each bead until the flower is ready.

Pull the line to the middle, where two fans on each side create a center. Attach the bead here. Then type 9 beads on the fishing line and make an arc that will surround the bead. Insert the needle into the first bead to make a circle. Fix such a beaded circle in the opposite side from the first and last bead, so the circle will hold better. Do the same in each center of the fans. That's all, the crocheted crocheted bandage for the girl is ready.

Crochet bandages are very interesting and stylish thing. It will definitely distinguish you and your child from the gray crowd!

The article is devoted to crocheting. This simple invention in skillful hands creates amazingly beautiful openwork things. This year, in addition to clothing, designers famous brands presented a line of fashion accessories separately. The unformatted headbands attracted the general attention of the female audience.

Depending on the shape, texture of the material and the method of fixation, the original element is capable of:

• add to strict business suit brightness and creativity;
• completely change the style of the image;
• transform an ordinary outfit for every day with one stroke into an evening one.

For example, a pin-up or rockabilly headband creates a retro Great Gatsby look. A wide kerchief for a babette is the chic of the 50s and 60s, a Greek bandage is a sophisticated sophistication. And vintage vixen is a cool hipster hype.

bandage tie elastic band
flower options purple
scheme examples with ears

Today's fashion dictates its own rules, changes the bar, requires naturalness. Actual accessories hand made i.e. made by hand. Headbands show creativity. They can be built from a scarf, sewn from fabric, knitted or crocheted.

Instead of buying a branded accessory, needlewomen knit designer bandages. self made. These are exclusive items. Headbands are decorated with original brooches, stones, monisto, beads, buttons, sequins and other baubles.

A headband that is crocheted can be made in different styles The choice of patterns is limitless. Fashionable bandage is relevant for all ages and at any time of the year. A girl, a teenager, a girl, adult women can wear jewelry on their heads, regardless of the type of face or hair structure. A newborn baby up to one year old or an older child in openwork bandage looks amazing on the head.

There are plenty of reasons to wear a beautiful product - an extract from the hospital, christening, matinees, birthdays, graduation, celebrations or as an everyday element for fixing hairstyles.

Crochet headband for a girl: patterns

Where to start accessory
makeup is beautiful from the wind
yarn pattern

For women who know the basics of needlework, the product is simply crocheted. For beginner craftswomen, it is also easy to master the skills if you try on the models of dressings that are performed simple patterns. To facilitate understanding of the workflow, each ornament is accompanied by a diagram with symbols. A decoding of symbols and techniques, how a pattern is knitted, is usually attached. Vertically, the table shows the numbering of rows, horizontally - the number of loops.

What you need to know.

1. The bandage is knitted in two ways - seamless in a circle or cut off for stitching.
2. Threads - fibers are distinguished by thickness and quality. Headbands for the celebration are knitted with threads of cotton texture in delicate pastel colors or white. Summer or sports headbands - you need a natural base or acrylic. Winter accessories or for the off-season - yarn with a content of at least 40% wool.
3. Crochet hook number - choose according to the density of the bandage and the thickness of the yarn. It is more convenient for beginners to fit with a device with a wooden handle.
4. Improvised means - scissors, a centimeter for measuring the girth of the head (OG), a needle with a large eye, a ruler, ordinary elastic bands for curls, satin ribbons, preferably thin.

How to crochet a headband for a girl

The headband is knitted according to a simple pattern. It may even be a beginner. The main thing is to follow the instructions and try to master the base, how the bandage is knitted. Remember the abbreviations:

• base (type-setting chain) - air loops (vp);
• double crochet (st. sn) or without it (st. bn).

Step-by-step instructions on how to knit a headband for a girl:

1. Prepare a skein of cotton yarn 225 m / 50g, a hook 2.5-3 mm, a regular hair band.
2. The bandage is knitted from a set of chains of air loops, the number of which depends on the width of the product. The number must be odd.
3. Dial 7-11 ch (for example, take 9) - this is the basis for attaching to the elastic.
4. 1 extra chain stitch is knitted, then the hook is inserted into the stitch of the next row.
5. Place the device under the elastic band, grab the working thread, finishing the loop.
6. Spend 6 repetitions of the two previous movements to get 9 p.
7. Cast on 3 sts to complete the rise, work in a double crochet stitch (sc), joining with each stitch of the last row.
8. Repeat ch 3, do 1 tbsp. sn between lines.
9. Points 5 to 8 are rapport, a basic pattern that is done several times. This algorithm is knitted to a length corresponding to the girth of the head. Check with a ruler to be sure.
10. Fasten the free edge of the bandage to the elastic without twisting the stitches.
11. Start decorating. You can tie flowers on a bandage, make a kanzashi bow using Japanese technology, or buy ready-made accessories. A large element or many miniature ones, concentrate in one place of the bandage or distribute along the entire length.
12. Looks good contrast satin ribbon, stretched with stitches along the center of the bandage with a transverse line and tied with a bow.
13. If a handmade flower is used, decorate in the middle with a button, bead or pearl, and around the edges with leaves of felt or threads.
14. The length of the headband is usually taken 3-4 cm less. It is necessary that the accessory sits tightly on the hair.

Crochet baby headband

Bandage tie a flower
baby ear options
white for children from the wind

Summer dress for a newborn daughter or girl up to a year old is knitted only from natural fiber. For a bandage, cotton, linen or worsted yarn is suitable.

If it fits openwork model"Scheherazade", prepare a hook No. 0.6 mm, a skein of cotton thread (for example, "Roman").

Technical guide or how to knit a headband step by step:

1. Start the pattern with scales with a set of chains with air loops.
2. In 3 ch from the hook, st. sn + 2 ch.
3. Skip ch 2 on the dial chain, then in ch 3 do 2 tbsp. sn.
4. It is knitted again 7 times according to paragraph 3.
5. Dial 3 in.
6. Yarn over and insert hook under previous st. sn, grabbing the working thread.
7. Complete 7 tbsp. sn + 1 ch.
8. Item 6 of the pattern is knitted again.
9. Again do 7 tbsp. sn + pass 2 tbsp. sn.
10. Knit in sequence step 7, then 6.
11. This is a rapport, with which the third scale is similarly knitted.
12. Pattern 4 start with 7 tbsp. sn + 1 ch. The second half - 6 tbsp. sn + 3 ch.
13. A connecting loop is knitted in the center of the scale.
14. That is, 3 ch + 1 tbsp. sleep in the middle.
15. Then insert the hook into the space between the scales + simultaneously into the center of two tbsp. dc of the previous row. Do 2 tbsp. sn.
16. The continuation of the pattern pattern is knitted - 2 ch + 2 tbsp. dc in the middle + 2 ch + steps of paragraph 15.
17. This is the first row with a pattern in the form of 4 scales.
18. The basis for the second line is 2 ch + 1 tbsp. sn throughout the chain.
19. Then yarn over, skip 2 tbsp. sn, knit 7 tbsp. sn + 1 ch + 7 tbsp. sn. Repeat 3 times.
20. The scales will be arranged in a checkerboard pattern.
21. Follow steps 13 and 14.
22. Then knit 3 ch + 2 tbsp. sleep in the middle and so the whole row of the pattern.
23. Cast on 3 ch + 1 yarn over. Further rapport of the first line from 2 to 17 paragraphs.
24. The length of the bandage is approximately 45 cm. Do not forget to fasten the tip of the thread.
25. Fold the bandage - one end up, the other down. Sew the edges.
26. It turns out a headband with a binding in the center, which is decorated with a bow, a flower, a brooch, beads, a button, pebbles. The choice of pattern depends on your imagination.

Crochet summer headband for women

A beautiful strip of thin linen yarn in the turban ethnic style is knitted for any outfit - a dress, sundresses, trouser or skirt sets, shorts, jeans.

How to knit a headband - a step-by-step execution scheme.

1. To knit a strip, prepare a 6mm hook and linen fiber.
2. Knitted for a pattern of 44 air loops. This is the average for the example. The size can be larger or smaller, it depends on the circumference of the head.
3. The chain is closed with a connecting loop to continue circular knitting.
4. Make 1ch to lift, then do the whole row with double crochets. Finish with point 3.
5. The second line of the pattern is 1 ch + the rest of the st. bn.
6. Rapport is knitted again to the required strip width.
7. A small rectangle of 4–6 cm is knitted according to a similar pattern. It should be used instead of dressing as when making a fabric hoop.
8. Close the seam of the bandage from the connecting loops with this small segment. You need to get a ring in the center.
9. Sheathe the headband with rhinestones, monisto, sparkles, wooden or metal baubles. For a nautical design on a summer holiday, shells and striped colors in the pattern look chic.

tie elastic band
makeup yarn dveta
clasp examples

Crochet winter headband for girls and women

A good alternative to hats is a fashionable handmade exclusive accessory.

Master class with a detailed description:

1. Warm headband is knitted from woolen yarn with the addition of acrylic crochet No. 4-5.
2. Cast on a chain with air loops long around the circumference of the head. For example, let's take 89 cm - this is the average size for girls and women.
3. The headband must be knitted in alternate rows - a straight line, the next reverse, etc.
4. Front side- ch 5, starting from ch 2, pull the thread from 5 loops of the pigtail. The principle of columns without a crochet.
5. That is, insert the hook into one stitch of the chain, pull the thread, forming 2 loops. Leave them on the hook without tying or tying. Then move on to the next stitch.
6. When 6 stitches are formed, yarn over and pull yarn through all 6 sts + 1 ch to create a hole in the pattern.
7. Cast on 6 sts again on hook. The sequence is this - pull 1 st from the hole + 1 st from the last one that was included in the previous rapport + 1 st from ch + 2 from the next 2 ch. You will get a block of 6 loops.
8. Yarn over the hook, pull through all 6 stitches, complete ch 1.
9. Knit a full row similarly to paragraphs 7 and 8. The last air loop is performed from 1 tbsp. sn.
10. Wrong side of the second row - 2 ch + 2 half-columns with a crochet into the hole of the pattern. Finish 1 st. sn.
11. The result will be 44 beautiful stars + 2 tbsp. sn in each hole.
12. Next, repeat the pattern from points 3 to 10 until you reach the desired size. Finish the pattern with a purl row. The average is 8 lines.
13. You process the edges with connecting loops.
14. This is a warm and rather dense headband, so it is better to make the decor delicate. Can be decorated ready big element from down, fur or airy fabric.
15. Large looks stylish knitted flower on a bandage made with a spiral. But this is a job for more experienced needlewomen.

Purple with ears for women
set simple luxury
Beautiful

For a better understanding of the process, watch a video tutorial in which craftswomen show the principles of capturing and making loops when knitting a bandage in different ways.

Crochet headband

This is a fashionable embossed method that is most functional for knitting warm clothes. Stylish sweaters, scarves, hats on the head, mittens are made with this pattern. The main difference between an elastic band and a curly bandage is that the technique provides the best elasticity while maintaining the original shape, length and structure of the bandage.

Needlewomen admit that crocheted elastic bands are more elastic than those made with knitting needles. There are different simple and complex ways of weaving. The main thing is to know the basic principles:

• the sequence of columns with crochets, forming a concave and convex relief;
• knitting with connecting stitches;
• capture for the back half-loop - with or without a crochet, half-columns;
• standard techniques - 1x1, 2x2, relief - 1x2, 1x3, 3x3.

Simple step by step diagram which even a beginner can handle.

It looks like a 1x1 gum, crocheted:

Post Views: 10,962

The headband, which is crocheted, is a convenient and practical thing. It will protect your ears from the wind and keep them warm in cool weather. Such a bandage will not take up much space in the bag, and knitting it, even for beginners, will not be difficult.

A headband, which is easier to crochet than knitting, can be made for both a girl and an adult woman.

To knit it, you will need a small amount of materials:

• yarn of the required color;
• a hook, the size of which fits the selected threads;
• needle and thread;
• various elements for decoration (rhinestones, stripes, etc.).

How to choose yarn and hook number

You can crochet a wide variety of headbands. It is important to choose the right thread for knitting and a suitable hook for them. The denser the threads, the greater the relief of the patterns and the volume of the bandage.

When choosing yarn, you should adhere to the following recommendations:

• the choice of yarn depends on when you plan to wear the bandage (in cool or warm weather). In summer, you should choose yarn from cotton, viscose or linen. For warm options, wool or wool mixture is purchased. If you knit it in several threads, then the bandage will be more voluminous;
• since this product is in contact with the scalp, it is necessary to choose threads with a natural fiber content of at least 30-40%;
• the best yarn thickness is 250-300 m/100g.

When buying a hook, the following rules must be observed:

• the length of the hook should be from 12 to 16 cm;
• the end of the hook, where the head is located, should be sharp, but not very strong so as not to cut yourself;
• the handle can be plastic, aluminum or steel. Plastic ones are light but break easily, while steel ones are heavy but will last longer;
• the diameter of the hook is selected the one that is recommended on the yarn label.

Headband Pattern Ideas

The headband, which can be crocheted using various patterns, will become an indispensable thing in the wardrobe. Among the most popular bandage pattern options, some are presented in the table below.

Name	Picture	Scheme
braids
Volumetric harnesses and braids
Tight knit pattern
Relief pattern
Pattern with openwork
Braids and harnesses
Paths with openwork
Leaves pattern
tight knit

Schemes, a step-by-step description of knitting headbands

The headband, which even beginners can crochet, is versatile and has various models. The following are diagrams and descriptions various kinds bandages.

Abbreviations used in this article:

• Air loops - Vp.
• Air lifting loop - Runway.
• Double crochet - SSn.
• Single crochet - RLS.
• Connecting loop - Sp.
• Lifting loops - Pp.
• Half-column with a crochet - PLsn.

Headband for a girl

To work, you will need the following materials:

• white threads "Romana". For them, hook No. 0.6;
• melange threads "Lily" for them hook No. 0.75;
• pink threads "Maxi". For them, hook No. 0.75.

To run this product, the following steps are required:

• Run a motif based on a square: dial Vp 4 pcs. Close in a ring. Raise the runway 3 pcs. and knit 4 rows according to the scheme. 4 row ends with Sp in the 3rd runway. Raise Vp 5 pcs. Below is a diagram of a square.
• Vp SBn 5 pcs. connect in a chain in the 3rd column of the base from the hook. VP 2 pcs. lift and tie in the 2nd column of the base from the crochet hook.

• In Vp, connected by an arch, 5 pcs., tie SSn 9 pcs. Skip one column of the base of the 4th row. In the next column of the base of 4 rows, tie SC. Dial lifting air loops 2 pcs. Skip base post 1 pc. Run Sc 1 pc.
• Run SSn 2 pcs. in the 1st column of the base. Run SSn 1 pc. in the 2nd column of the base. Repeat 1 time throughout the row. VP 2 pcs. raise. Skip 1 stitch and knit SC at the base of the 4th row.

• Perform actions as in the previous row: alternate SSn 2 pcs. and SSn. The row ends with sc. Break off the thread. Go to the next side. In the 7th column of row No. 4, fasten the thread. Make a chain of Vp in the amount of 5 pcs. Skip 2 columns of the base from the hook and perform RLS. Knit in the same way as on the previous side.
• Run sc 1 pc. in the circumference of the 1st row.

• Run sc around the perimeter. At the point of the motive, make a “picot” Vp 3 pcs. The basis of the product is completed.
• Next, you need to use the scheme. Make flowers in the form of "daisies". Then sew them to the base. Sew a bead into the center of each flower.
• Make laces according to the scheme, the length of which is 5 cm. Sew them to the base and the bandage is ready.

Headband with embossed posts

The headband, which can be crocheted for both summer and winter, can be crocheted using embossed posts. The simplicity of knitting makes it easy to perform even for beginners.

To do the job you need:

• mint-colored threads;
• hook 3 mm;
• scissors.

For knitting you will need:

• Dial a chain from Vp. Its length should be equal to the required width of the product. However, the number of loops must be even, as the product will need to be folded in half.
• In the 1st row, make Pp 2 pcs. In the 3rd loop of the chain, perform PLSN.
• Knit a turning row: make Pp 3 pcs. Then make embossed double crochet stitches 3 pcs: double crochet, and then draw a hook over the stitch from the front side. Knit SSn.
• SSn are being carried out 2 pcs. from the wrong side. They are performed in the same way with the difference that the hook is wound from the wrong side and knitted in the same place. Then, facial columns are performed 2 pcs.
• Thus, alternation is carried out to the end of the row. The last column is double crochet.
• Knitting turn and perform a similar row. Size 18-20 cm. In the purl rows, only purl loops, and in the facial rows - facial ones.

• Run half of the row. With a product width of 20 columns, knit 10 columns according to the pattern.
• Run turning rows of 10 columns 8-9 pcs.
• Connect the thread with the rest of the thread of the first part. Make 8-9 rows.
• For an overlap, two parts intersect. Run a new row, which will consist of columns in the amount of 20 pieces. Knit on the first part of 10 columns. Knit on the second (lower) part of 10 columns.
• Run the canvas 18-20 cm.
• Fold up the bandage. Sew with sc. Unscrew the bandage and straighten the overlap.

Headband "Mickey's Girlfriend"

To make this dressing, you will need the following materials:

1. Children's wool yarn.
2. Hook number 3.
3. Sliding ring for ears.

Knitting process:

1. Dial Vp 7 pcs.
2. Knit sc 6 pcs. and VPp. So work 6 rows.
3. Double the 1st column. The result will be 7 sc.
4. In the next 3 rows, knit 7 pcs.
5. In the next row, perform RLS 8 pcs. and Vpp.
6. Next 3 rows: Sc 8 pcs. and 1 pc. Runway
7. Next, a double column of 1 pc., And then RLS and runway are performed.
8. Next, 3 rows of 9 sc.
9. Double the 1st column. The result is 10 pieces. SBn.
10. The next 32 rows include 10 pcs. SBn. It turns out a canvas measuring 22 cm.
11. Decrease stitches every 3 rows. To do this: knit the 1st column in a row. Then skip the next stitch of the previous row. It turns out the length of the bandage is approximately 44 cm.

To make the ears you need:

• • on the sliding ring make sc 6 pcs. Tighten the ring tightly;
  • in the next row knit 12 pcs. SBn. End each row with a connecting loop and runway;
  • next row: sc 3 pcs. and double column 1 pc. Repeat 4 times;
  • in the next row, perform sc 17 pcs. Do not knit the last 5 pieces. columns.

Fasten the thread. Cut the thread, leaving about 30 cm for attaching the eyelet. Run the second eye in the same way. Sew the strip into a ring and attach the ears.

Bandage-bow

To make such a bandage, you must:

• threads Lana Gold 800;
• hook number 3.

The drawing is done by alternating the connecting loop and PLSN. At the end of each row there is no Pp. You must immediately turn the work and start with a connecting loop.

The connection of the bandage is carried out by a chain of Vp in a zigzag pattern of 3-4 pcs. The center is tied as follows: Ch 6 pcs., Starting from the 2nd loop from the hook, perform RLS in each loop. Run 8 rows. Sew a bandage.

Headband with flowers

A summer headband with flowers will be combined with a skirt, a T-shirt and a dress.

For its implementation you need:

• yellow, white, red, orange and blue threads "Iris";
• hook No. 1.5;
• elastic band: width 1.5 cm.

General scheme:

For the 1st flower: you need to take yellow threads. Form a loop. Knit PLSN 16 pcs in it. Make a ring.

Then the work is carried out according to the following scheme:

• Colors are taken in the following order: yellow, orange, white and red.
• To complete the 2nd flower, you need to: make a loop with white threads. Run PLSN 8 pcs. Form a ring. Then work according to the scheme.

According to the above scheme, tie 2 flowers.

Color sequence:

• for the first: white, orange, white;
• for the second: blue, yellow, blue.

To make flower No. 3, you need to: make a loop with red threads. Tie SSn 16 pcs. Connect the ring. Carry out work according to the following scheme:

Alternating colors: red, yellow and white.

4th flower: make a loop of thread yellow color. Knit PLSN 8 pcs. Lock into a ring and knit according to the pattern below:

The colors alternate in this way: yellow, white and blue.

5th flower: make a loop with orange threads. Knit PLSN 8 pcs. Close the ring and knit according to the following scheme:

According to this scheme, 2 flowers are made.

The colors alternate as follows:

• for the first: orange, blue, orange;
• for the second: white, blue, white.

Then you need to measure the gum. Sew an elastic band with an overlap on both sides of 1.5 cm. Put it on a jar and fasten flowers on it with needles. Then you need to sew the flowers to the elastic.

Two-tone headband for a girl

For work you will need:

• yarn - 2 colors;
• hook;
• needle and thread;
• scissors.

Work process:

1. With the first color, dial Vp in the amount of 80 pcs. and Pp 2 pcs. As a result, a strip of 50-52 cm in size should come out.
   • Start with the 3rd loop from the hook: Sc knit the 1st row. It is important to insert the hook into the link that is behind the loop so that the edge is even. Run runway 2 pcs.
   • Make sc for the back wall of the loop. Knit in this way until the length of the strip reaches 5 cm. We must not forget to do 2 VPs at the end of the row.
   • Then, according to the same pattern, knit the second strip.
   • Link 2 strips as shown in the picture.
   • Tie the ends of the strips.
   • Tie with half columns.

1. • At the end, do Vp. Leave the thread, leaving 10-15 cm.
   • Do steps 6-8 on the other side.
   • Attach the thread to the side. Run Vp 2 pcs. Process the edge of the bandage RLS.
   • Cut the thread, leaving the end. Repeat step 10 on the other side, but do not cut the thread.
   • Fasten the bandage with the left threads. To do this, fold it inward with the front side. Ends to fulfill PSb.
   • Hide the ends of the threads in knitting with a needle.
2. The bandage is ready.

Summer headband for women

A summer bandage can be knitted from linen fiber. It will suit any outfit: dress, sundress, shorts and jeans.

For its manufacture you need:

• linen threads;
• hook 6 mm.

Manufacturing process:

1. A pattern of 44 VP is performed. Their number may be more or less. It all depends on the circumference of the head.
2. Using a connecting loop, close the chain to continue knitting in a circle.
3. Execute runway.
4. Link a series of SSn.
5. Repeat step 3.
6. In the second row, perform ch, and the remaining loops - sc.
7. The rapport is performed up to the desired bandage width.
8. In the same way, make a rectangle 4-6 cm in size. It is necessary for dressing.
9. Close the seam from the connecting loops with this rectangle.
10. Decorate the bandage with rhinestones, sparkles, monisto.

Crochet winter headband for women

A bandage made of wool or wool mixture can replace a hat.

For its manufacture you will need:

• wool yarn with acrylic;
• hook number 4-5.

To make it, you will need to follow these steps:

1. Dial Vp. Their length is equal to the girth of the head. The average size for women it is 89 cm.
2. The dressing is performed in alternate rows: a straight row, the next one is the reverse.
3. Front side - Vp 5 pcs. From the 2nd loop, the thread is pulled out from 5 loops of the pigtail. That is, the hook must be inserted into the stitch of the chain, then the thread is pulled out, forming 2 loops. They must be left on the hook without tying. Go to next loop.
4. When forming 6 pcs. loops to yarn over. The working thread is pulled through 6 loops and 1 pc. Vp to get a hole.
5. Pick up 6 pcs. loops. Pull 1 loop from the hole, 1 loop from the last one that was part of the previous rapport, 1 loop from the chain loop, 2 loops from the next 2 chain loops.
6. Yarn over the hook. Pull 6 stitches through yarn over. Make vp.
7. Knit a row in the same way as steps 5 and 6. The last loop is knitted with CC.
8. Wrong side, 2nd row: Vp 2 pcs., Plsn 2 pcs. Last SSn. The result is 44 stars and SSn 2 pcs.
9. Then repeat from 2 to 8 steps until the product is the desired size.
10. Loops of the connecting type to process the edge of the product.
11. The bandage can be decorated with fluff, fur or light fabric.

Turban style headband

To complete this model, you will need:

• wool mixture threads;
• hook number 3;
• needle;
• scissors.

Performance:

• Cast on loops. Their number depends on the volume of the head. The example uses 20 pcs. loops and 3 Pp.
• Make the 1st row of PLs. To do this: yarn over, insert the hook into the loop, take the working thread, stretch it and knit all the components with one loop: the elongated loop, the yarn over, the previous loop. Make runway 3 pcs. at the end of the row.
• The second row is knitted with an elastic band. Alternating convex embossed half-column 2 pcs. and a concave embossed half-column 1 pc.

• Execution of the 3rd row: the same gum. Only convex half-column 1 pc. and a concave half-column 2 pcs. Knit to a length of 20 cm.
• The next row is done in half. In this example, columns are made 10 pcs., Vp 3 pcs. Then the work is unfolded and knitted to a strip length of 10 cm.
• Finish the last row. Knit Vp and cut the thread (the tip of the thread should be 10-15 cm).
• Attach the thread to make the second strip. Tie Pp 3 pcs. and follow the same pattern.

• Lay the strips one on top of the other and connect them in the next row.
• Continue work for another 20 cm.
• Fold the item in half. The front side must be inside. Using half-columns, fasten the ends.
• Make the last loop in air. Cut the thread, leaving the tip.
• Using a needle with a wide eye, hide all the threads.

openwork bandage

For work you need: cotton threads, hook number 1.

Work process:

1. Dial Vp 27 pcs.
2. In the 9th in a row from the hook, knit sc. As a result, an arch emerges from 5 Vp.
3. From Vp 5 pcs. pick up a chain. Skip 2 loops. Attach the chain to the 3rd loop sc. So perform 5 arches, consisting of 5 ch.
4. Execution of the 2nd row:
   • dial Vp 8 pcs. chain. Attach a chain of sc to the central part of the first arch;
   • before the end of the row, complete arches of 5 ch.

So do the work until the 18th row inclusive.

1. 19 row. Finish it this way: run VP 3 pcs. in the last arch and at the base of the last arch from the previous row, make SSn.
2. 20 row: 4 arches are made, consisting of Vp 5 pcs. The row ends as 19.
3. Rows 21 and 22 are knitted in the same way.
4. Rows 23-30 are performed according to the scheme: in each row, make 3 arches, consisting of 5 pcs. Vp. 3 strips are made from Vp.
5. Finish the 30th row as follows: raise with semi-columns to the center of the arch from 5 Ch.
6. A chain of 12 pieces is being made. Vp. Attach to the second loop from the hook with a half-column. Run a chain of Vp 8 pcs. Attach the chain to the top of the second arch.
7. Jump to the top of the third arch with half columns. Run a chain of VP 10 pcs. Attach a chain to the top of the first two chains.
8. Vp tie a tie of the required length.
9. Change the thread to another color and knit the second side of the bandage in a mirror image.
10. Sew on any decoration in the center.

New fashion headband models in 2019

Crocheted headbands are a fashionable and practical item. female image. In 2019, designers offer new fashion options strips. They are available in various designs, colors and finishes. Today, the most popular types are bandages made of several materials: satin, cotton, silk.

The most popular types of bandages include:

• product with a small pattern;
• spiral pattern;
• jacquard patterns;
• openwork knitting.

To decorate the accessory, you can use bows, buttons, flowers.

For women of age, it is worth picking up plain bandages. For solemn events you can use rich shades, and for everyday life, calmer tones. Beautiful colors: chocolate, emerald and eggplant. The table below shows some options for bandages with a knitting pattern.

Name	Scheme
Bow variant
openwork strip
Floral motif

Crocheted headband will become an indispensable thing in the wardrobe. It can be worn by both women and girls. A variety of options for bandage models allow you to wear this accessory with any style of clothing. This accessory can be made by hand. Ease of implementation allows it to connect even for beginners.

Article formatting: Natalie Podolskaya

Video about knitting a headband

Crochet headband - video how to knit: