Here is a photo that shows a variety of methods for creating simple ribbon bows by hand.

How to make a simple bow?

The most unpretentious bow can be made independently as follows:

• Before starting work, prepare two tapes (wide and narrow) different colors. The length and width of the light ribbon is 20x5cm, the dark one is 40x5cm, respectively.
• Next, fold a wide ribbon in the form of a loop and fasten the edges with glue.
• Repeat the same with a narrow tape. To do this, you need to put it wide on top, and fasten the ends of one and the other to each other with glue.
• Take the remaining piece of a narrow ribbon and tie loosely in the middle of the resulting product.
• Free edges allow you to attach a bow to a gift or clothes

How to make a fluffy ribbon bow

There are many variations on this theme. Here is one simple way to make a satin bow at home:

• Purchase a ribbon of the desired length and width from the store. The longer it is, the more magnificent the product will turn out.
• Fold the ribbon like an accordion, tie the part in the middle with a thread.
• To make a big bow out of satin ribbon, use several of these elements connected to each other.

Lovely bow in Kindergarten or on September 1, it is easy for first-graders to create using a two-meter white ribbon.

To do this, perform the following steps:

• Prepare several segments of equal length (15cm).
• Stack them up front side inside.
• At a distance of 2 cm from the bend, glue is applied.
• The place of gluing is pressed with tweezers for strength.
• After the glue dries, the bows can be turned inside out.
• The edges are fastened with a thread and sewn to the base (felt, cloth).
• As an additional decoration, rhinestones and beads are suitable.

Bows from wide ribbons

Often, when choosing a bow tie, difficulties arise, since the store does not always have a model of the desired color.

A worthy solution to this problem will be the manufacture of such a tie from improvised materials. Here is a short guide:

• Prepare 2 pieces of tape different lengths and widths: the first - 20x5, the second -18x3
• Fold each of them in half, securing the ends with glue
• For strong bonding, it is recommended to use a needle
• Connect both parts with stitches
• Pull the thread and fasten

“Roses” are considered an original decoration - beautiful bows with their own hands.

Creation proceeds as follows:

• Wrap the tape around your hand, make a knot
• Spread the "petals", bending them inward
• Repeat the action with each "petal"

Narrow satin ribbon bow

Sophistication and charm to your clothes will be added by the Dior decor element. It is not difficult to make a kind of bow:

• Cut out elements of various lengths from the tape
• Make rounds of them in the form of a figure eight
• Lay them on top of each other from largest to smallest
• Fasten the bow - for this you need to thread a small piece of ribbon of the same shade into the last turn

The finished product will fit any packaging box, it will be especially stylish in combination with a round and oval shape.

The following video will visually present a master class on how to make many small bows from a narrow ribbon using a table fork.

Hair ornaments

Handmade hair bows will be a great way to stand out. To do this, follow these points:

• Take 2 pieces of tape (5x25) and a thin tape
• Bend the corner at one end of the wide tape
• Align the end of the second corner with the first
• Connect the resulting corners with a needle to form a coil
• Then do the same for the corners. Turning the product over, make another corner (perform these steps until the ribbon triangle remains)
• The resulting "diamond" bend twice in half
• Fold the free end to form a triangle.
• Gently hold it in the center so that the structure does not fall apart
• Remove the needles and fold over the inner triangle to create a petal
• Sew the element in the middle

After that, you should prepare another such part and connect both using a narrow tape. To attach the products to the hair, you will need a clip or elastic band.

How to make a chic bow from nylon ribbon

So that the process of home needlework is not too time-consuming, it is enough to follow the step-by-step actions:

• You will need 2 ribbons of the same size (150x8)
• Bend each in half and try to string it on a needle and thread
• After finishing work, pull the thread so that the remaining piece of tape is 30-40cm
• Make a knot and straighten the resulting product
• Take a thick felt and prepare a circle (diameter 8cm)
• Make two holes in it and thread a thin ribbon through them
• Glue the first tape to the base in a spiral, then the second.
• Cut off the rest of the tape, and process the ends

DIY photo of ribbon bows

Note!

Note!

A bow is a classic way to decorate a gift. All kinds of shapes, sizes, colors and design methods - all this gives the gift a certain solemnity. How to make a ribbon bow? To do this, you need patience, skillful hands and a little imagination. Do not hesitate - all your efforts will pay off with a more than happy birthday smile.

We make a bow from a ribbon - we create a festive mood!

volumetric bow

If you want to get a very lush bow, then it is better to use a ribbon made of a relatively rigid material.

1. We turn the tape into several rings. Their length depends on how you planned the future bow - large or small.
2. We slightly smooth out our loops and cut off a little material from each corner (see image).
3. We straighten and fold the tape again so that the rectangles we cut out are placed in the center.
4. Now you need to drag the middle of the rectangles with tape or wire (as an option, fasten with a stapler).
5. In turn, begin to straighten the loops in one direction or the other.
6. Let's fix the rings and the bow is ready!

Traditional butterfly bow

Classics of the genre. Such a bow will equally perfectly decorate both gift wrapping and a bouquet of flowers.

When creating such a bow, it is important not to wrinkle its sides.

1. Divide the tape in half. We form loops of the same size on each side of the tape segment.
2. We cross both loops with each other: the right one will become left, and the left one will become right.
3. We lower the left loop from behind down.
4. Pull the loop forward and pull the bow exactly in the middle.
5. Straighten the sides and ends of the bow.

"Strict" bow

1. Cut off a piece of tape and glue the edges together.
2. Lightly smooth the ring with your hand.
3. With a piece of the same ribbon, but shorter, wrap the middle of the ring, hiding the place of its attachment.
4. That's all!

Bow in several layers

In order to create a similar bow, you need three different, but matching ribbons.

1. Arrange the pieces of ribbon in such a way that the widest one is at the bottom, and the narrow one is at the top.
2. Cut the ends of the ribbons with a corner towards the middle.
3. Tie the ribbons down the center with a thin ribbon. Leave its ends long at the back so that you can attach a bow to a gift.

Bow of two ribbons

Very cute bow. Having mastered the technique of creating a bow from two ribbons, it can be used not only for gift wrapping, but also for decorating hair accessories.

1. Take two ribbons of the same length but different widths.
2. Connect a wide tape into a ring and secure with glue.
3. Wrap a thin ribbon around the ring from a wide ribbon and also fasten it with glue.
4. Wrap around the middle of the double ring and tighten into a knot. Do not forget to leave long ends - they will be used to secure the bow to the package.

How to make a ribbon bow - stylish Dior

Having carefully looked at Dior, it can be noted that it is a kind of complicated version of the “strict” bow.

1. You will need four pieces of tape - one longer than the other.
2. Roll the smallest part into a ring and fix its edges with glue.
3. Connect the ends of the remaining ribbons in the same way.
4. Set the ribbons to size and tie in the middle with a ribbon. Tie it into a knot, leaving long ends.

Flower bow

1. Take the end of the tape and, retreating a few centimeters, twist it once.
2. Holding the twist with two fingers, make a loop out of the tape and also secure it with your fingers.
3. So continue to form loops until the “degree of splendor” of the bow satisfies you.
4. Tie the place where the loops are fastened with a thin ribbon.
5. Carefully straighten the bow.

Peony bow

Making a peony bow almost completely repeats the stages of forming a voluminous bow. The fundamental difference is only in the last step.

1. Glue the ends of the tape.
2. Cut off the corners of the rectangle diagonally.
3. Move the thin gaps of the tape to the middle and tie this place with a thin ribbon.
4. Make cuts on both sides of the workpiece.
5. Make several of these blanks in the same way. Then fasten them with a ribbon in the middle.
6. Spread the "petals" of the flower.

How to make a bow out of a plastic bag

Sometimes fantasy works wonders, and such original ideas making a festive bow from a plastic bag.

1. Take a couple of identical (preferably) plastic bags. They are also popularly called "t-shirts"
2. So, put the "t-shirts" in one pile and cut off their handles.
3. Now, starting from the outer edge, start cutting out the “snake” from the polyethylene squares (see diagram 2).
4. Wrap plastic tape around your palm and tie up the center of it.
5. Cut off the connected sides of the bow with scissors and straighten it.
6. You can start decorating gift wrapping.

bow bud

1. Fold the tape with loops in one pile. The more loops, the more magnificent the bow.
2. Tie the workpiece in the middle with a thin ribbon.
3. Straighten the button.

Now it will not be difficult for you to make a bow from a ribbon. Armed with new knowledge, you can safely start creating original and unique packaging for the birthday boy. Good luck!

How to easily and quickly decorate any gift box - of course, tie a bow on it. Polypropylene, fabric (organza, satin, etc.) ribbons are used, one or more colors (both similar shades and contrasting, but combined with each other), it depends only on the imagination and tastes of a person.

simple bow

You need one large piece of ribbon (2 times longer than the planned size of the bow) and one small piece (2-3 times the width of the ribbon). On a larger piece, mark the middle and apply both ends of this piece to it. The connection is fixed with a couple of drops of glue, double-sided tape (not fabric-based, because it is poorly cut with scissors and sticks to everything) or threads (preferably strong synthetic ones). A small piece is wrapped around the junction so that it is not visible, and similarly glued or sewn together.

layered bow

For this decoration, 3-5 ribbons are taken that differ in width, and are either the same in length, or such that with a decrease in width, the length also decreases. The ribbons are stacked on top of each other from the largest to the shortest and narrowest, tied in the middle with a small fixing piece.

The previous options are often combined, resulting in no less original and easy-to-make bows:

Advice! The bow can be decorated with beads, rhinestones, buttons, small brooches or stickers.

classic bow

This is the most common type of bow, known to almost everyone. To make such a single decoration look spectacular, it is better not to take too narrow a strip of material and not to make the bow small. Or then the gift wrapping should be decorated large quantity small bows.

For this decoration, the ends of the ribbon are applied to its middle, i.e. It turns out 2 loops of the same size. Then, approximately in the middle, they are crossed, and the upper loop is carefully pulled into the ring formed from below. Then the knot is tightened more tightly, while trying not to wrinkle the product too much.

spherical bow

For this bow, you will need 2-3 meters of a ribbon with a width of at least 2-3 cm made of polyethylene or a relatively dense fabric that will not fluff or fall apart from cuts:

1. The tape is wound in a certain number of rings (at least 5-6, otherwise the result looks like a head) in turns of 10-15 cm.
2. Then the rings are flattened and slightly cut off at the edges by eye, about a quarter of the width.
3. Then they are folded in places of cuts to each other, tied with a cord, wire or ribbon and the resulting bow is fluffed.

If the fabric of the tape is fragile or thin, then it is not necessary to make incisions, they are limited only to fixation.

The more rings in the blank for such a ball, the prettier it will turn out. And for even greater splendor, 5-6 neat cuts can be made along the loops of an already finished bow made of dense fabric or polypropylene.

Important! How to fix the ends of fabrics so that they do not fray? A simple option is to melt them with a match or lighter. But this must be done carefully so as not to burn the entire decoration and not leave ugly black marks. A similar melting effect will be obtained by cutting the tape with preheated scissors.

Other ways to lubricate with a small amount of glue (PVA, "moment" or any other) or pre-starch the tape.

hair bows

All kinds of tape designs are used not only for gift boxes but also as a hair accessory. Bright and colorful bows look spectacular on the heads of babies, schoolgirls like to decorate pigtails and ponytails with lush multi-layer balls of ribbons, more sophisticated and strict options are combined with official or identical outfits. They are attached directly to the hair or to hairpins, invisible hairpins, hairpins and other objects fixing the hairstyle.

Bows are perhaps the most popular and affordable type of jewelry. They suit small and adult women of fashion, whose hairstyles become more elegant with the help of lush ribbon “bouquets”.

Now the stores sell ready-made "things" of this type for all occasions. But, firstly, "consumer goods" is far from perfect: it can never be ruled out that the purchased jewelry will be fragile and "fail" at the most inopportune moment.

And secondly, a thing made by oneself is not only cheaper, but also “more exclusive”. But how to make a bow with your own hands?

There are many ways to make various decorative gizmos, and neither special skills nor any special tools are required to master them. First of all, the ribbons themselves are needed, as well as scissors, needles, coils, and sometimes glue for fastening parts.

Tied the ribbon into a bow...

Classic buns, ponytails and pigtails, intercepted with an elastic band or hairpin - very comfortable, but too simple views hairstyles. They quickly “get bored”, and the girl / girl, as one old song says, “wants something like this ...” A bow will help to add a festive hairstyle.

It’s not difficult to tie ordinary bows on your hair - even elementary schoolgirls can do it. But so that on a particularly solemn holiday - a birthday, September 1 or New Year's party, - to decorate the girl's head in a more original way, you will have to try a little.

Let's try to make ribbon bows with our own hands. Here are the options for such a "crown".

"White Diamond"

For one such miracle you will need:

• White ribbons:

1. 1 m - from kapron, 8 cm wide;
2. 0.6 m - from satin, 5 cm wide;
3. 1.5-2 m narrow (no more than 3 mm) satin ribbon;

• Hair band.

In addition, to make a bow from a satin ribbon with your own hands, you will need: a lighter, scissors, a needle and a spool. You can use both ordinary cotton sewing threads and cotton-coated polyester threads - they are just as thin and easy to sew, but much stronger.

To begin with, let's make blanks. Wide stripes - both nylon and satin - are ironed and cut into 2 equal parts. The cut edges should be burned immediately with a lighter.

Let's start making our jewelry.

The first half-meter nylon segment must be gathered onto a thread, passing it in the middle, then pulled off, gathered in the form of a rose - it will be at the top.

We fold the second piece of nylon in half lengthwise and also assemble it on a thread, stepping back about 0.2 cm from the fold. We tighten, we get a flower with petals. In the middle we leave a small hole - this will make the diameter more voluminous.

We fold a thin ribbon into loops and put it on the petals, arranging them in such a way that they protrude slightly beyond the edges. We fasten each loop with two or three stitches. Part number two is ready.

Now let's take a wide satin ribbon. We take it by the ends and fold them to the middle, so that they overlap each other a little (no more than 1 cm).

If the fabric has both front and back sides, you need to make sure that the wrong side is inside. We sew, trying to make the seam lie exactly in the middle. We tighten and wrap the middle with a thread 2-3 times, it turns out a "butterfly".

According to the same scheme, we make another same butterfly, put it crosswise on top of each other, and sew it in the center. This will be the foundation.

We go to the finish line and connect all three parts: first the satin, then the “chamomile” with thin loops and, finally, the white rose. Details can be glued or sewn - as it seems to someone better and more reliable.

An elastic band is sewn to the satin backing, with the help of which the whole structure will be attached to the head of the little princess. The lush "royal crown" - about 12 cm in diameter - is ready, you can go to the ball!

"Sweet couple"

With these lush, but small balls, you can decorate small pigtails or “tails” for every day. Need:

Nylon is prepared in the same way as in the first case: ironing, splitting in half, firing the edge. The half is folded in half (in length) and stitched with small stitches at a distance of 0.3-0.1 cm from the fold - the closer the better. Then it must be "collected".

It is better not to wait for the end of the nylon strip, but to do it gradually, stitching and gathering small sections. At the end, the bow must be tightly, but carefully pulled off, trying not to break the thread.

Otherwise, unpleasant consequences are inevitable: from the need to repeat the operation to wrinkling and holes from the needle on the fabric.

The tightened workpiece is twisted in a spiral and stitched along the edge, assembled into an accordion. Stitches should be strong but loose, not tight to the point. The result should be something like a slightly shaggy nylon ball.

We make a mount. A bead is strung on the hat elastic, which will help to fix the bow on the pigtail more tightly. Then the rubber band is tied into a ring with a diameter of 5 cm. The ends of the knot (no more than half a centimeter) are melted with a lighter. The elastic is sewn with a knot to the bow, a couple of stitches on one and the other side of the knot. Try not to grab the folds, working only with the assembly area.

We take a prepared leather or felt circle and make a longitudinal cut in the center, approximately 1 mm less than the diameter of the bead. The ball is threaded through a circle, which is stretched over an elastic band and fixed with silicone glue at the junction with the base of the product.

Finally, we will try to arrange the folds so that it looks like a small fluffy ball. A pair to it is made in a similar way.

Flower on a hairpin

Such an ornament is quite suitable for a young girl - as from age category teenagers as well as those who are older. Attaching it to your hair is not difficult.

For the manufacture, in addition to the previously listed (several types of satin ribbons of different widths and colors, needle and thread scissors, etc.), you will need:

• ordinary school line;
• a strip of white cardboard;
• button "with a leg";
• hairpin clip.

Consider step by step how to make a bow on a hairpin with your own hands. Let's start by making two rectangles out of cardboard: 8 and 6 cm wide (the length is not important in this case). Using a ruler, find and mark the middle of each.

Take the widest strip of fabric and wrap it around the 8cm strip of cardboard, crossing the ends so that the crosshairs exactly match the marked midline.

We mark the place on the tape with a pencil and carefully remove the fabric from the cardboard strip, holding it with our fingers.

Then we sew along the pencil mark “needle forward”, carefully pull it together and pass the needle through the center several times in order to fasten it, and set it aside.

Taking a part of a different color and smaller width, we wrap a 6-centimeter cardboard template with it three times.

The coils should lie close to each other, but not overlap. Again we make a pencil mark in the center, remove and sew, just like the first part.

The narrow strip should be brighter than the first two in order to contrast with them, and about 8-10 times narrower than the widest one.

We wrap it around a large cardboard blank and, having removed it, we tie the resulting bundle in the middle with a thread. We attach it to the first part, straightening and fluffing the loops. After that we sew both.

We take a new segment of a narrow ribbon and string a button on it, which should cover the middle.

We tie the product with this piece, trying to ensure that the button falls exactly on the center, covering all the fastening parts. Turning the decoration over, tightly tie with two knots and melt the ends.

We attach the finished decoration to the clip with a sealant, and then, after letting it dry, we additionally sew it on, passing the threads through the holes in the hairpin.

Little tricks

So you learned about various manufacturing technologies, and from now on you can make any beautiful ribbon bow with your own hands. And now - a few tips that will help you quickly and accurately deal with all of the above arts.

It is better to iron with a slightly warm dry iron (without steaming). At high temperature fabric, especially nylon, can suffer, and moisture sometimes leads to the formation of spots on its surface.

You need to sew and collect the bow on a double thread - this will help to avoid breaking when tightening.

To gently melt the edges, it is better not to hold the fabric in your hands, but to lay it in a thick book, slightly sticking out the edge. In addition, all kinds of beads, brooches, silver threads and other inexpensive jewelry will help to decorate the ribbon socket.

And another version of a beautiful bow-hair clip - in the next video.

Bows are everywhere. Mothers tie their daughters' hair with them. They serve as accessories for clothes and shoes.

Bouquets of flowers decorated with them look more impressive. Gifts, beautifully packaged and tied with an openwork ribbon, will not leave anyone indifferent. For the manufacture of bows, a wide variety of materials and techniques are used, depending on what result you want to achieve.

How beautiful to tie a bow from a satin ribbon

Satin ribbons look very nice on their own, but in combination with interesting shape they contribute to the creation of a bright and unique image.

Classical

The classic version of the bow has the simplest structure and does not require much experience for its execution.

Would need:

• satin ribbon;
• scissors.

Figure #1.

Sequencing:

1. Cut the tape to the desired length;
2. Fold the strip in accordance with what is shown in Figure No. 1, point (a);
3. Cross the ends of the material (b);
4. Pull one end of the tape into the resulting loop (c);
5. Knot - tighten, and the tape - straighten.

Strict

More difficult option, which allows you to combine beauty with rigor, is an excellent addition to the office style.

Would need:

• satin ribbon (base);
• satin ribbon (finishing);
• fabric glue;
• scissors.

Figure #2.

Sequencing:

1. measure out required length and cut off the corresponding part of the tape;
2. Fold the strip in the form of a circle, connecting the ends;
3. Fasten the place of contact of the ends with glue and press the joint to the opposite side of the circle;
4. Gently, without leaving bubbles and folds, smooth the material at the connecting point;
5. Using a finishing tape, wrap the joint (picture No. 2);
6. Glue the ends of the trim as well.

Double

The decoration is simple in execution and, at the same time, original in appearance.

Would need:

• two satin ribbons of different colors and different widths (but they must be in harmony);
• glue;
• scissors.

Sequencing:

1. Cut off the parts of the wide and thin ribbons so that they have the same length;
2. Put a thin strip on top and along a wide one exactly in the middle, glue the ends of the two tapes adjacent to each other;
3. The opposite ends of the tapes are also fastened with glue, forming a circle, and then press the joint to the opposite side of the tape;
4. Cut off a small piece of a narrow strip and tie it across the bow, overlapping the connection point, tighten;
5. Remove excess cross tape if necessary.

How beautiful to tie a bow around your neck

A neckerchief with the right selection will fit into any situation and will suit any outfit. To add charm to the image, you can give this accessory the shape of a bow. A bow can be laconic and small, reminiscent of a male butterfly, or lush and bright, drawing attention to itself.

For such a "decor" you will need a scarf of small width and thickness. It must be folded into a thin strip and proceed to the design of the butterfly.

1. Put the resulting "harness" on the neck so that one of the hanging ends is longer;
2. Cross the ends of the strip, placing the long side on top, and then stretching it through the bottom into the resulting loop;
3. Give the short side the shape of a half-bow, and lower the long side over the central part of the decoration;
4. From the long end, fold the second half bow and pull the element through the loop behind the first half bow;
5. Tighten the "butterfly";
6. Straighten the halves of the decoration, achieving their symmetry.

Volume

This option is performed with a regular width scarf and, despite the simplicity of execution, looks extremely impressive.

1. Wrap a scarf around your neck;
2. Give the ends of the accessory the shape of loops;
3. Weave the loops, tying them into a knot;
4. Straighten the resulting bow, making it as lush as possible.

How beautiful to tie a bow on a dress

Bows attached to a dress can be an ordinary decoration, or they can draw attention to advantages or hide flaws. All these qualities will be in the hands of any lady.

You can place a figuratively tied ribbon on any part of the dress. Lush jewelry options are more suitable for tight-fitting outfits, while neat and modest ones are more suitable for looser ones.

Depending on the placement of the tape, you can focus on the belt, chest (décolleté), shoulders and other attractive curves. female body. In many cases, fashionistas buy ready-made bows and attach them in the right place.

One of the options for self-production of such an element is as follows:

1. Two ends of ribbons required material fold in the form of loops and cross with each other;
2. Fix the central part with a brooch or pin with decorations;
3. Sew an accessory to any part of the dress where needed.

Bow with one loop

Very simple, but aesthetic and timeless option.

A bow from one loop is made as follows:

1. As in classic version you need to start with two loops;
2. One of the ends must be circled around the second and stretched ½ into the knot;
3. The second end must be threaded into the knot to the end, leaving it to hang freely.

How beautiful to tie a bow on the belt

A classic bow in the belt area can be considered a universal accessory for a dress of any style:

1. Fold the ends of the belt in the form of loops;
2. Cross the resulting loops;
3. Skip one of the elements into the loop formed by the crossed ends;
4. Gently tighten the resulting knot and straighten the bow.

How to tie a beautiful ribbon bow on chairs

Usually bows on chairs appear during the preparation of premises for various solemn events. Before fixing the decoration, it is customary to cover each chair with a cover of a harmonizing color, but this is not necessary.

In addition, the use of such an accessory implies compliance with the following rules:

1. Do not break the festive concept with out-of-print colors or inappropriate bow design;
2. To stiffen the shape, use organza ribbons;
3. Make sure that the edges of the ribbons are neatly processed and do not create an untidy impression.

As in any other case, the most commonly used bow for decorating chairs is the classic one.

If there is no cover on the chair, then you can do the following:

1. Fold the ribbon for the bow in half;
2. Hang the strip on the back of the chair so that a “loop” hangs from the inner (which the seated person touches) side of the back, and two tails from the other;
3. Under the crossbar, thread both tails into a loop and tighten the tape a little;
4. If you wish, you can stop at this, or you can wrap the adhesion point with the ends of the tape (initially you need to direct them in opposite directions) and also tie the decoration.

The bow can be lowered and raised along the back, adjusting the height of its location. It is also allowed to place several such strips side by side.

How beautiful to tie bows on September 1

So that the day of knowledge leaves behind a lot of good impressions and a charge of vivacity for the next academic year, it is necessary to properly prepare for it. Last but not least, the girls associate the training with a brand new uniform and beautiful white bows in their hair. There are several ways to bring this idea to life.

Method number 1: Pleated bow

This option is usually preferred by girls. adolescence because it looks very cute and romantic.

Would need:

• wide nylon ribbon;
• a thin elastic band (preferably to match the hair).

Step-by-step instruction:

1. Using an elastic band, fix the hair - this is the basis;
2. Tie the ribbon around the hair, distributing it so that one of the "tails" is approximately 2/3 of the total length;
3. Add more long end three times, and short bandage the resulting layers;
4. Straighten the fabric, making it voluminous and lush.

Method number 2: Four petals

Lush decoration, great for school celebrations.

Would need:

• long corrugated tape.

Sequencing:

1. Wrap the hair taken in the tail with a fabric strip and tie a knot in such a way that the remaining ends are of the same length;
2. Fold the loops of the "tails" and tie with each other in the form of a bow;
3. Repeat the same with the remaining long ends;
4. Unfold all loops.

Method number 3: Lush flower

Exquisite DIY satin ribbon decoration: quick and easy.

Would need:

• long satin ribbon;
• thread (to match the color of the tape);
• thin hair band.

Sequencing:

1. Skip the thread along the middle of the tape;
2. Move the satin as far as possible along the thread, collecting it into an "accordion";
3. Roll up the resulting assembly like a snail, fix the base with a thread;
4. Sew a fabric flower to the elastic band.

Options for a beautifully tied bow on a gift box

The gift is good and important in itself, but it makes the right impression only with the appropriate design. First of all, this applies to bows decorating gift box. They can take on completely different forms.

Terry

Its other name is multilayer.

it a win-win to achieve the desired effect.

1. Fold the satin ribbon several times;
2. Make cuts as shown in the picture;
3. Fold the satin so that the incisions are in the center of the strip, tie this point with a small piece of ribbon;
4. Pull out all the petals one by one (taking them out to the right, then to the left), moving from the inner to the outer, and fluff them well;
5. If necessary, process the edges of the bow (so as not to crumble).

Lush

This decoration is made of three ribbons of different widths and colors.

It creates a very cozy impression and is especially suitable for the Christmas and New Year holidays.

1. Fold a medium-width strip of fabric 4 times so that each next layer goes exactly on top of the previous one;
2. First give the widest ribbon a similar shape, and then straighten the layers so that they lie crosswise relative to each other;
3. Put the first element on top of the second, and drag everything in the center with a thin ribbon.

When tying a bow, you should always take into account its compatibility with surrounding objects, materials and purpose of use. Of the materials, it is better to prefer denser ones, since silk does not hold its shape well enough, which negatively affects the appearance.

Two ways to tie the simplest satin ribbon bows are in the next video.