It's easy if you know a few "tricks"
1. The top of the top from the inside has a silicone band.

2. jersey in the chest area is quite tight

3. The back pattern is shorter than the shelf pattern.

Now more on each of the points + pattern for size 46-48.

Here: building a top for the size of OG = 96-98, From = 78, ABOUT = 98-100 cm

actwin,0,0,1360,742;Untitled - Rhinoceros (Corporate) - Rhino4 05/09/2015 , 20:47:41

• Choice of knitwear.
  It should not be too stretchy and hold its shape well. For example, knitwear-“oil” is not the best option for the top. I had cotton jersey good quality, quite dense, medium stretch.
• Decat the fabric before cutting! Wash as usual so that there are no surprises after - knitwear is insidious.
• Calculate the "negative gain" in the chest area.
  To do this, you need to stretch a piece of canvas across and determine the comfortable degree of tension to your measurement of exhaust gas 1. Measure above the chest - the centimeter tape passes under the armpits. We need to understand how much to “pull” the top border of the top.
  The fact is that the top we will have is light, without supporting bones. He will have to hold on only due to the tension on his chest.
  In the waist and hips, it is enough to reduce your measurements by 2-3 cm
• Cut out the back and shelf.
  We will have two areas for fitting the shelf.
  Firstly, in the chest area 2-3 cm. This is how we distribute side tuck for chest size.
  secondly, in the waist area 1-2 cm. So we shorten the back to get rid of wrinkles in the lumbar deflection. It is simple and pleasant to fit the knitted fabric. We use the properties of extensibility: first you need to chop off the sections, evenly distributing the fit. Then grind side cuts any knit stitch (I have a zigzag with a small amplitude of 1.3 mm and a step of 2 mm). Stretch the fabric with your hands while sewing. All processes are in the photo. I will make a reservation right away: I am not a fan of the sewing technique. I do not plan to buy an expensive flat-seam machine for my small workshop. And in general I prefer methods of processing knitwear that are different from industrial ones. Overlock, simple and stepped zigzag, hidden hand stitches-It's enough. this is NOT wrong! This is sincere and couture). If you prefer special equipment - this is welcome. All markers are different in taste and color.
  I love knitwear, I sew it a lot and often. I advise beginners not to be afraid of technology). Knitwear, of course, has sewing features. But this is such a grateful material that having mastered simple rules, you will love it dearly, as I do). By the way, I plan to make a series of articles on knitwear.
• Processing side cuts on the overlock. Of course, you can only get by with a 4-thread overlock stitch, but stretching the fabric under the overlock knife while simultaneously following the direction of the stitch is quite problematic. “Sloppy somehow” (c).
• We process the lower and upper sections with an overlock line.
• We just bend the bottom. As you like - any knitted line or hands. In the photo: The more experience I gain, the more often I use running stitches. time for manual work I don't regret it - it pays off in the end result.
• to the upper cut, first we attach the silicone tape - with an elastic stitch, slightly pulling the tape. Then we bend the cut. All processes are in the photo.
• The top is ready.

The top is a shoulder product of a light women's range. It got its name from the English “top”, which means “top”. As a rule, a top is called a women's and children's shortened lightweight model, which is a variation of a T-shirt, sleeveless blouse, T-shirt.

zara.net

The materials from which tops are made

Like all textiles, tops can be divided into two groups according to the type of materials used: knitted or sewn from fabric.

As a rule, they have external differences:

• knitted fabric models resemble a sleeveless T-shirt;
• knitted models are similar to linen assortment, T-shirts;
• fabric models, which can also be called sleeveless blouses.

The materials from which tops are made have no restrictions on the fibrous composition. For knitwear thin fabrics typical for T-shirts are used: satin stitch and erasers different types. Since T-shirts are worn on the body as the first layer, it is necessary to choose fabrics made from natural fibers that have high hygienic properties, air and moisture permeability.

For tops that are analogous to blouses, light fabrics made from natural or blended fibers should be preferred. It is possible to use fabrics with the addition of elastane, which provide a better fit of the product. For models intended for evening outings and short-term wear, it is possible to use fabrics and fabrics made of artificial fibers, polyester, polyamide. In this case, it is necessary to take into account the degree of fit and the presence of open areas in the product to ensure comfortable wearing of the product.

formalgallery.com

Making a pattern of a women's top from knitwear

Consider the option of making a top with straps from a thin knitted fabric.

Straps in this case can be:

• one-piece with a shelf and a back, have short shoulder seams;
• made of inlay in continuation of the edging of the armhole.

The pattern of a knitted T-shirt is built on the basis of the basic design of a blouse or dress of an adjacent silhouette. To design a pattern for a top with straps, it is necessary to gradually modify the base.

• Determine the degree of extensibility of the fabric by a practical method of applying material to a mannequin or living figure.
• Transfer the resulting widths along the girths of the chest and hips to the design.
• Model the neckline along the shelf and back.
• Display the location of the straps. If necessary, outline the facing of the neck of the shelf.
• Chest and waist darts level due to the extensibility of the canvas.
• Lengthen the center of the shelf by 0.5-0.7 cm for better balance finished product.

rudenko-anna.ru

The assembly of such a model consists in the sequential edging of open sections and sewing of the side seams on a sewing stitch machine.

The technological order of connecting parts is as follows:

• edge the cuts of the neck along the shelf and back;
• edging the armhole of the shelf with the transition to the shoulder strap, edging the armhole of the back with a single piece;
• repeat the edging of the armholes of the second side of the details, starting from the back, ending with the shelf;
• grind side seams on the overlock;
• bend and fix the bottom of the product with elastic single or double stitching.

listit.com

Making a pattern for a women's top from fabric

A women's sleeveless blouse made of fabric is also called a top. A simple silhouette usually does not require a strong fit and retaining all the darts to form the silhouette.

listit.com

The pattern of a fabric topic, as a variant of a sleeveless blouse, is built even easier than a knitted one. For modification, it is necessary to make changes to the design of the shoulder product.

• Close the chest tuck, transfer part of it in lowering the inclination of the shoulder of the shelf.
• Balance the front and back. Model the neckline along the shelf and back.
• Check side seams.
• To balance the finished product, lengthen the shelf by 0.5-0.7 cm.

odensa-sama.ru

The assembly of the textile top on the straps is different from the knitted model. The processing of open edges depends on the designer's idea and can be made in the form of inlays, facings, decorative piping, lace. The edging of the cuts of the armholes, in turn, can be done in two ways: with stitched side seams or on an open armhole.

The priority is the second, more technological processing option.

• to grind shoulder sections, iron and overcast.
• Turn over the resulting closed neck in accordance with the model.
• Treat open armholes with piping or facing, depending on the model.
• Stitch the side seams, iron, overcast the cuts.
• Hem the bottom of the product.

A pattern of a top with sleeves is built in a similar way based on the basic design of a dress or blouse. In the case of an adjacent silhouette chest darts are saved, the sleeve is modeled according to the design. In a loose top-blouse silhouette, tucks can be ignored. Process sequence the connection of parts is carried out as in any textile product with the sleeve sewn into a closed armhole.

listit.com

There are other options for constructing a topic pattern, for example, based on an existing model. In this case, it is enough to transfer the parameters directly to the material or paper, specify the cut lengths and assemble the product by repeating the processing of the sample.

Light tops form the basis of a harmonious wardrobe. They are worn and combined with any bottom: skirts, trousers, jeans. There are no restrictions in the compilation of sets and ensembles: it is enough to maintain a stylistic balance and suit the occasion.

I really like this top model, so I suggest you pay attention: a one-shoulder top pattern.

You will need:

• knitted fabric
• 2m of knitted trim to match the fabric
• 1 m of reinforcing tape 1 cm wide
• 15 punch buttons

Cut details:

Top pattern - only 2 parts.

Cut details in stretch jersey fabrics with stretch stitching or narrow zigzag stitching. And the hem of the bottom is sewn with a double needle to maintain its elasticity.

Description of the work of sewing a pattern of a top on one shoulder:

• , and process the side seam of the topic.
• finishing inlay along the entire contour of the neckline so that the fabric of the topic is placed strictly between the aligned edges of the inlay.
• Lay a line on the "face" of the product. Treat both parts of the armhole in the same way. Sew the shoulder seam. Process allowances together.
• From the side of the fastener, unscrew them to the front side, and iron. Put a fastening tape on top, bast it and sew it with two lines to the edge.
• On the tape stitched on the back of the top, punch through the bottom of the buttons. Punch the tops of the buttons over the tape on the front
• Process the bottom cut of the topic, bend the allowance to the wrong side, and. Remove the threads of the temporary running stitches and the piece.

Top pattern with stand-up collar.

Very beautiful top with a stand, meaning with a stand collar.

To make this top you will need:
crosswise stretch knit fabric

The cut details are:

• Before - 1 detail with a fold
• Back - 1 piece with a fold.
• Scarf-rack - also 1 with a fold

Description of the work of tailoring a top with a stand:

• Fold front and back right sides, sew side seams.
• Bend the bottom of the product and sew with a narrow zigzag stitch.
• turn the armholes and the upper cut of the back inside out and, slightly stretching the fabric, stitch from the front side. seams.
• Fold the scarf details right sides. scarf around the perimeter, leaving a free place for attaching to the neck.
• Turn the scarf inside out and . Gather the front, put between the outer and inner parts of the scarf and sew. The seam .

Such a T-shirt can be very beautifully decorated with rhinestones, add some stylish brooch or wear a hip belt. I think it will turn out wonderful :-) Good luck!

Top pattern with a "swing" neckline.

This is a swing pattern, or rather a top pattern with a "swing" type corlovina. Very beautiful and stylish, clothes with such a collar are always in trend.

You will need:

• elastic knitted fabric
• adhesive pad for knitwear

Cut details pattern swing:

• 1 front fold
• 2 pieces for the back
• 1 piece with a fold is a shoulder strap
• The facing of the upper cut of the back is also 1 piece.

Description of the work of the swing pattern:

• Reinforce with padding at the top of the back and shoulder straps.
• Run the middle seam and darts on the back.
• Iron the depths of the tucks towards the middle of the back.
• Turn the one-piece facing of the top of the front to the face and sew along the cuts of the armholes.
• Fold the shoulder strap with the right side inward, along the longitudinal section, turn it inside out and iron.
• Turn inside out the one-piece facing for the top of the front and the allowances for the armholes.
• Insert the ends of the straps into the upper corners between the allowances. Sew the product along the armhole from the face to the edge about 5 to 7 mm from it.
• folded front sides facing the top of the back and back.
• Adjust the seam allowances. Sew the side seams without grabbing the facings.
• Bend it to the allowances of the side seams and the middle seam and to the depths of the darts Bend the bottom of the product and sew it to the edge, and then through 5 to 7 mm from it.

That's it, beautiful and not difficult!

Very trendy strapless top. Pattern.

Today I present: a strapless top pattern. In my opinion, the model deserves special attention, because it has been in trend for more than a year, it looks very romantic and sexy at the same time!

You will need:

• silk stretch
• ruffled chiffon
• finishing gum

Details of cut pattern strapless top:

• Before - from silk-stretch -1 detail with a fold.
• And the back is made of corrugated chiffon - 1 piece with a fold.
• The top of the top is 2 details with a fold.

Description for a strapless top pattern:

• Process the sections of the front of the back and the top of the top.
• and complete the side seams, you need allowances on both sides.
• on the cutouts, turn to the wrong side, sweep, and stitch along the edge of the processing
• cut.
• and finishing elastic to the upper part of the product, without disturbing the folds of the corrugation.
• ruffled chiffon detail along the line of the upper cut of the front and back of the top, starting from the middle of the back and the middle of the front.
• top, work allowances together and iron down. Finish the bottom of the open part of the top of the top with a finishing elastic band. ready product.

Top pattern with straps.

So, today in the spotlight: top with straps. This is a pattern for a top with cord straps. Interesting? Look further.

You will need:

• elastic jersey
• cord about 3cm thick
• 6 blocks with washers with an inner diameter of 5 mm

Cut details:
Front and back 1 piece each with a fold.

That's all, the top with straps turned out, you can already wear it and be irresistible!

Pattern of a women's T-shirt.

Good day!! Today is a T-shirt pattern.

A T-shirt is an undoubted element not only of a sports wardrobe, but also with a skillful decor and choice of fabric, you can sew an excellent version of an evening top using a regular T-shirt pattern. For example, if you decorate the shoulders - we get original outfit. You can simply, having also received the author's decor, or embroider with rhinestones / sequins.

In general, there are many ways, it is worth a little imagination.

In classic sports version, of course, a knitted fabric is selected, but do not forget about experiments

T-shirt pattern.

Tailoring process.

• We connect the shoulder seams, and the sleeve with the armhole.
• We also connect the side seams and at the same time the lower section of the sleeve.
• We process the neck (hem 1 cm).
• We process the bottom of the sleeves and T-shirts (hem 2 cm).

You can increase the size of the pattern like this:

Peplum top pattern

My regards!! Today, a pattern of a top with a peplum. How could it be without him, because the peplum is the undoubted favorite of this summer, spring, and I have no doubt that next season as well.

• Let me remind you that a skirt pattern with a peplum, as well as a separate article with, as an element of decor in clothes and just a self-sufficient accessory - a belt. Therefore, it will not be difficult for you to carve it out.

The peplum top pattern consists of several parts - this is the back / shelf and, in fact, the peplum itself.

• There are two options here: top like basic foundation, and the peplum "protrudes" in two versions, depending on the "splendor", so you can immediately decide on its size.

• Sleeves can be sewn to this top, it will also turn out very elegant.

By the way, you can easily make many options for stylish outfits if you pair a regular fabric with a matching tone to such a top. Thus we will get a peplum dress, which in my opinion is win-win, and a separate top, a separate skirt, as well as many variations with various other things in your wardrobe.

As you can see, you can be in trend, dress stylishly, fashionably, elegantly, and not depend on the peculiarities of the store trade.

Not so long ago, lingerie style of clothing quickly burst into women's fashion. It cannot be said that this is something absolutely new and unprecedented. And in the middle of the 19th century, models of dresses from light cotton fabric with lace that flowed over the body in a loose cut.

For the first time, our contemporaries, world-famous fashion designers Jean-Paul Gaultier and Versace, used a similar style for dresses in their collections. Only ladies from high society wore such exquisite things to social events.

Now all women have fallen in love with such light fabrics, and a dress or top in linen style with lace can be seen in the wardrobe of any girl with a slender figure. That's very beautiful.

In the article we will consider color scheme used in such models, we will get acquainted with the features of the cut, with what they can be combined and give advice on how to sew a dress in linen style or a top.

Style features

To begin with, we will carefully find out how the underwear style differs from other models. Firstly, the color scheme is filled only with delicate pastel tones - it is pale pink, champagne color, coffee with milk, white, light shades of green and blue. Although the latest fashion trends claim to be bright colors, it is increasingly possible to see a top in linen style in bright emerald, turquoise, even black.

The material is chosen light, flowing over the body, fitting all the curves female figure. It is silk, chiffon or satin, thin cotton is allowed. Decoration occurs with the help of additional elements of guipure and delicate lace. Although velvet in deep colors such as navy blue and purple is often used for evening dresses.

Typical styles

It is easy to recognize a dress and top in lingerie style by their appearance, reminiscent of underwear, combinations. Usually use an open style with thin straps. Such things are suitable for girls with a boyish figure, with narrow hips and a slender body. To put on such things that reveal most of the woman's body, you need to thoughtfully and wisely. If the chest is large and thin straps cannot withstand the weight, then it is permissible to use silk corsets or separately tailored cups in the underwear style.

Also typical for top models in linen style with lace is the presence of an open back and shoulders. The more bodies exposed, the better. But! In each style, you need to adhere to a reasonable measure, otherwise the image from refined will quickly turn into vulgar.

Let's start with the classic Imagine the image of a girl entering a restaurant in long dress with delicate lace of flowing fabric on thin straps, on her feet she wears stiletto sandals, and around her neck is a beautiful shiny necklace. Of course, all the eyes of men will instantly be focused on her. And if the dress has a corset that fits the chest, then the image is feminine and sophisticated.

For a top in linen style with lace, there are a great many options for creating ensembles. It goes well with trousers and shorts, with a skirt and wide harem pants. Even the usual banal skinny jeans with a top look great together.

On cool evenings, you can complement the look with a cardigan or jacket made of cashmere or wool.

For evening dress heels are perfect, it is better to wear stilettos instead of pumps. They will look more elegant with thin fabric. For a casual outing in jeans, shorts or capri pants with a light lace top, ballet flats or leather sandals. A clutch will complement the image, because you need to put the most necessary things for a walk somewhere.

Linen style in clothes

We have considered the features of the main free-cut models with thin straps, let's note the variety of other forms. There are models with brightly outlined sewn-in cups, there are narrow-fitting styles of tops or dresses with and without a corset to the waist line.

Another interesting option the cut is a dressing gown that reaches floor level. There is such a variety of dresses of several styles. For example, a slightly wrapped dress with a deep cut in front, exposing most of the legs and chest. Another intriguing style, on the contrary, leaves completely open back. This cut is often used for evening dresses.

The latest innovation that conquered all Hollywood stars and has come down to us is the shirt dress. Outwardly, this style resembles men's shirt, only longer. The cut is loose and comfortable at home. It seems that the girl at home walked in her boyfriend's shirt and forgot to take it off before the street.

When something new appears in the fashion world, the prices for innovations are simply cosmic. In fact, the difficulty in tailoring such products lies in the insidiousness of silk and chiffon, which have a habit of stretching. Not having the skills to work with such materials and good sewing machine, it is impossible to sew neatly and beautifully Evening Dress or a silk top.

It is also quite difficult to work with velvet, since it tends to crumble, so if you want to have a fashionable summer top or dress with lace, you can sew it yourself from cotton fabric. It is easy to sew a lingerie-style top with lace according to the pattern, you need to prepare materials for work and carefully consider the proposed pattern of the simplest top with free-cut straps.

Necessary materials

To sew a short top, you need to buy half a meter of thin cotton fabric. For edging, select lace to match the fabric, 1.5 meters will be enough. It is also allowed to use lace of a different, contrasting color or standard white.

Some sew straps on their own, folding the fabric, but then the strap turns out to be rough. You can buy braid, 1 meter is enough. For cutting, you will need a chalk and sharp scissors. For basting details, prepare pins and contrasting threads with a needle.

Set up the sewing machine by first setting it up and then you need a regular stitch machine. Threads need the same color as the material. If the lace is in contrasting shades, then it is better to choose a thread in the color of the edging, since the lace is sewn along the top of the fabric.

Sewing

Top sewing is quite simple if you cut the fabric correctly. If you doubt the indicated sizes, you can do it easier. Take the top that is in the wardrobe, iron it, carefully lay it out on the fabric and circle it with chalk. When cutting out the details with scissors, do not forget to leave allowances for the seams.

Further along the wrong side with an overlock, we sheathe the edges and grind the details of the pattern with a basting seam by hand. Having tried on the top, you can sew the details with a machine stitch. Next, sew lace around the triangles of the bodice and straps. So the fashionable summer top in linen style with lace is ready. Sewing it is easy. Good luck!

T-shirt is a familiar wardrobe item that can be worn in any situation. It is incredibly simple, but everyone needs it. It is combined with different things, complemented with accessories. A shirt that fits well on the figure will be appropriate both on the beach and in the office. It is only necessary to approach her choice with imagination. In a product made of high-quality fabric, you can feel comfortable in the summer heat. And on a cool day, it will warm you with cozy warmth.

You don't have to buy a useful item. We will tell you how to make a new thing yourself.

We sew a T-shirt with our own hands

Preparation for work

To make a shirt, you will need to take measurements. And besides, find out how much the knitwear will stretch in the process.

Required data

• neck girth (OSh).
• Chest girth (OG). Removed strictly horizontally through the protruding points of the chest
• Hip circumference (OB). It is measured horizontally through the protruding points of the buttocks.
• Armhole depth (GP). This is the distance from the top of the shoulder to the armpit.
• Product length (CI).

If the fabric can be stretched without losing appearance by 130-150%, then it is necessary to use a negative increase factor of 20%.

If the material has an average degree of stretch, then the allowance for free fit will be zero.

Important. Before working with knitted fabric, it must be washed in a gentle mode and ironed (“knitwear” mode).

How to sew a simple summer T-shirt without a pattern

When you need to do the work yourself, and quickly, in a short time, without a pattern, you need to perform several actions.

• Take your T-shirt, the style of which is completely satisfactory.
• Fold it in half face inward and circle the outline on paper.
• Fold the cut in half, place paper pattern close to the fold and cut out the back.
• Deepen the neck to the desired size.
• Cut out the front of the shirt.

In places where seams are supposed to be, maintain an allowance of 1 cm. First, stitch the shoulder details of the T-shirt with a regular seam, and then process it with a “zigzag”.

Similarly, sew the sides of the product. If the fabric is very elastic, then use only such a line. So the seam will not burst in the process of wearing.

Finish the neckline and armholes. Then bend inward by 0.5 cm and lay a regular line (stitch length 2-3 mm). Treat the bottom in the same way.

Advice. So that during the cutting process the pattern does not slip on the fabric, you can fix it with needles.

For attractive and neat look the neck is processed with edging. This will prevent stretching while wearing.

On the piping you will need knitwear of a similar or contrasting color. A 4 cm wide oblique strip is cut from it. Further, the procedure is as follows.

• Bend the strip face outward and iron.
• Unfold and lay each half inside, iron. You will get an edge in 4 additions.
• Sew one shoulder.
• Starting from the free shoulder, attach the piping to front side products. Baste to the neck, slightly pulling.
• Attach the inside of the piping so that the basting lines match, and the neckline is covered with fabric as much as possible.
• Lay a seam on sewing machine at a distance of 1 mm from the edge.

Remove the basting and sew the second shoulder. The armhole can be processed in the same way. This must be done before the sides are sewn.

Thus, you can sew a home shirt from old t-shirt for a little girl.

How to sew a women's one-shoulder t-shirt

Asymmetrical armhole is fashion trend. To make a one-shoulder top yourself, you should build a pattern according to all the rules. Or you can use a ready-made T-shirt or T-shirt.

The procedure for making a fashionable top

• Lay out the shirt on the surface.
• Retreat on one side 2 cm down from the armhole.
• Attach a long ruler and draw a straight line to the second strap;
• Cut off unnecessary parts with sharp scissors.

To fix the neck, you will need a linen elastic band. Finish the edge with a zigzag, tuck inward and sew so that the elastic can be threaded through.

Such a neckline will not stretch, and the top will hold securely on the body. To decorate the product, you can attach a brooch or other decorative element to the shoulder.

Advice. Similarly, you can do with a T-shirt, then you get a blouse with one sleeve.

How to sew a tank top dress

A tank top dress can be a convenient element basic wardrobe. For this dress you will need:

• cut, 140-150 cm wide and equal to the length of the dress.
• Two T-shirts, one of which fits the figure, and the second has a free silhouette.
• Scissors, needles and threads.

To build a pattern grid, you need to draw a rectangle with CI dimensions vertically and a half-circumference of the hips horizontally.

• Fold the smaller shirt right side in and trace it on the paper.
  Attach a large T-shirt to the armhole line. Extend its side line to the bottom.
  Cut out details with allowances.
• Deepen the neck and repeat all the steps for the shelf.

How to sew a T-shirt for sleeping

In order to make a comfortable night T-shirt for sleeping, you will need two pieces of fabric measuring 50x50 cm.

Before

• Lay out one of the cuts on a flat plane and fold in half.
• Measure from the upper inner corner 12 cm down (neck) and 10 cm to the side (shoulder point). Connect the dots;
• Set aside the width of OG/4 +1 cm, cut off the excess fabric.
• From the upper outer corner, set aside 7 cm down (armhole). Connect with a smooth line to the point of the shoulder.
• From the armhole, lay 6 cm down and draw a horizontal line 11 cm long (chest point).
• Mark from the corner of the undercut 1 cm up and down. Connect each to a chest point to make a triangle.
• Stitch the grooves, smooth them out.

Back

• From the upper inner corner, set aside 12 cm down (cutout).
• Measure the width of the product OG/4 +1 cm.
• Connect the cutout point with a smooth line to the outer upper corner, cut out.

To strengthen the top of the shirt, you need to cut strips of fabric 10 cm wide, repeating the top lines of the pattern. Prepare the straps: cut out rectangles 3 cm wide and stitch them. You can use ready-made bias tape.

Assembly

• Process all the details on an overlock or a zigzag seam.
• Sew the sides.
• Take on straps.
• Attach a trim to the top.
• Process the bottom.

If the fabric is loose, then you can use a linen or "Moscow" seam. The technology is as follows: fold the details inside out, stitch, turn out and stitch again so that the edges are inside the seam. Iron the finished product.

Advice. To make adjustable straps, use a buckle with a jumper. You need to thread the fabric through the buckle before it is sewn to the shirt.

If you additionally sew shorts, you get a wonderful pajama set for sleeping.

T-shirts that look like underwear tops are now at the height of fashion. Sewing such a product with your own hands is not at all difficult. For decor, you need black lace. It can be stitched on top, or it can be inserted between the facing and the shelf.

Beginner Tips

• It is not always possible for a beginner seamstress to work with knitwear. Often, due to inexperience, the side seams are too tightened, so the product wrinkles.
• To prevent the side seams from pulling together, you can use tracing paper. It is attached with needles on both sides of the product. Then a seam is laid, and the paper is carefully torn off.
• In order not to damage the product, it is necessary try on a T-shirt at every stage. In addition, basting seams and the use of an iron will help.
• Necessarily process fabric before sewing to prevent shrinkage of the finished product.

Features of sewing T-shirts on straps and straps

In the process of making a tank top with straps, you can use several ways to attach them.

Mounting options:

• strong threads;
• decorative rings, with threaded straps;
• straps from oblique inlay.

Features of the cut of the T-shirt with straps is that the details are cut out without taking into account the straps. This means that it requires less fabric. For the manufacture of straps, an identical fabric, finished inlay, as well as any other material can be used.

The specifics of working with different materials

Each fabric has its own unique properties to be taken into account when working. By following simple rules, you can avoid difficulties.

When working with an atlas

• Wash and iron before use as the fabric may shrink.
• Iron along the warp thread so as not to stretch the fabric or deform the product.
• Before cutting, cover the surface of the table with a non-slip cloth.
• Take into account seam allowances in the process of constructing a pattern.
• Choose thin and sharp needles so that there are no puffs on the surface.
• Baste satin details so that they move synchronously under the sewing machine foot.

When working with knitwear

• Consider the direction of the shared thread when cutting.
• Do not stretch the material to avoid warping.
• When processing sections, add a bias tape so that the seam does not lengthen.
• Use special needles with a rounded end.
• Check the quality of the seam on a separate flap.
• Do not stretch the fabric when sewing.
• Press all seams through a damp cloth to smooth them out.

The main advantage of knitwear is elasticity and the ability to return to its original shape. This feature must be taken into account in the work and used for your own purposes.

How to decorate a T-shirt with lace

Lace is an element of decor that will turn even the most ordinary everyday T-shirt into an elegant evening dress.

Use cases

• Make a cut along the back from the bottom, leaving 5-10 cm to the top, and insert a triangle of lace with a wedge.
• Sew lace elements in the form of a collar.
• A fragment of cotton lace can be sewn anywhere on the shirt, and then cut off excess material from the inside.

You can use lace both in the color of the T-shirt and in contrasting colors.

Unusual T-shirts with your own hands

How to sew a T-shirt for a doll

Making clothes for dolls is jewelry work. Our advice will help even a girl cope with it. To build a pattern, the doll is placed on the surface, shoulder lines, armholes and vertical lines are marked. They are carried out tangentially to the body.

You need to make two such sketches: for the back and for the shelf. Deepen the neck on the details of the shelf. Cut the back in half lengthwise.

Cut out three pieces with seam allowances. Details are drawn out. When stitching the back, the size of the doll's head is taken into account. After trying on, you can determine how to stitch the back. And at the top you will need to sew a button or Velcro.

How to sew a T-shirt for a car seat

To sew protective covers like "t-shirt" for car seats, you need to make a pattern. Using paper (polyethylene) and a marker, circle the following details:

• front of the back;
• back of the back;
• seat.

The side parts of the seat should not be covered with covers, because they will block the airbag modules.

When choosing a fabric for covers, you should give preference to dense knitwear. The front part of the cover will be made of two elements (seat and back), the back of one. The top of the parts is sewn like a T-shirt so that a headrest passes through the “neck”. To process the side cuts, you should choose a dense wide elastic band and make ties for fastening from it.