Hello! I'll show you how to knit interesting flower knitting needles. I started knitting this flower when I was asked to help figure out how it fits.

At that moment, I still did not know who the author of the idea of ​​such a lovely flower was. Since the picture of a flower was easy to find on the Internet, but without a description and a caption. And recently I learned that the author of this flower is Olga. In the photo - her lovely granddaughter. Olga herself told me about this, so now we know who gave us this creation)) I have a flower knitted with knitting needles No. 3.5, yarn “Marilyn Nazar” (100g / 330m). You can knit by combining colors.

FLOWER DESCRIPTION

We knit in straight and reverse rows (i.e., not in a circle). Odd rows are knit, even rows are purl. For knitting a flower, we use “garter stitch” (i.e., all rows are knitted with facial loops), partial knitting. We knit a flower with one long ribbon (seen in the original photo). There should be five or six "teeth" in the tape.

When the tape is completely connected, we tighten it by stretching a thread through the center. Due to this, a magnificent flower is obtained, in which the “teeth” are petals, and the left even edge is the center of the flower. We collect 13 loops, of which 6 loops are knitted on the LEFT without changes (this will be the lush middle of the flower), and additions are made on the RIGHT - one loop in each front row. Due to the increase, “teeth” appear - future petals. On the right, we add like this: after the central loop (it is always front), we make additions - 1 loop in each row, on front side- NEAR THE CENTRAL LOOP. From the inside, we knit the added loop with a crossed front one so that there is no hole left. As a result, the "petals" of the flower will appear. When the number of loops reaches 19, close seven loops on the right - one petal is ready. We start knitting the next one. In general, in the course of knitting it will become clear.

Having connected five petals, we close the knitting, we tighten the flower in the middle, and that's it. To whom something remains unclear (how to tie the edges of the petals with a “rib”, etc.), please see step by step. I wish everyone happy knitting! Many thanks to the author Olga for the idea of ​​​​such beautiful flower! Sincerely, Saule Vagapova

Hasn't gone out of style for years trendy garter stitch beanie hat. She is usually knitted in a kit. snood garter stitch. Today I want to bring to your attention a description and a video tutorial on knitting this warm and comfortable winter kit.
Dimensions: height 38 cm, unstretched circumference 54 cm. On OG from 57th.

To knit a beanie you will need:

yarn gray color(or any other, to your taste) Alize Lanagold Classik (51% acrylic, 49% sheep wool. 240 m / 100 g) - 4 skeins (1 skein for a hat, 3 skeins for a snood), knitting needles No. 5, sewing needle .

The fabric knitting algorithm is taken from the case of Saule Vagapova.

The bottom line is that we will tie the entire canvas across. That is, not from the crown to the bottom, or from the bottom to the crown, as many of us are accustomed to, but by cross knitting. At the end of the work, the panel looks like a cone. If you hold the finished hat in your hands horizontally, there will be a narrow end on the left - the crown, on the right - a straight one (knitted without cuts). Here is this one - connected in a straight line, with the side and a hat is put on the head (after stitching the two sides of the canvas).
Therefore, the size (volume of the head, OG) is calculated by the number of connected rows. That is, if you want the hat to be smaller in volume, not so wide, knit fewer rows than mine.
And the height (depth, length) is determined by the number of loops typed. So, in order to knit, for example, a hat with a height of not 38 cm, but 25 cm, dial the loops not 59, but smaller.
For example, for a height of 30-32 cm, you need to dial 50 p
When the hat is knitted, the correct stitching of the fabric remains, because. no need to pull the top. It is obtained in finished form thanks to knitting with "shortened rows".

How to knit in garter stitch

The entire hat is knitted in a simple and light garter stitch pattern. In which each row (front and back) is knitted with facial loops. As a result, both sides of the canvas look the same, that is, there is no wrong side.

We knit the fabric in short rows

So let's get started. We put two knitting needles together, with an additional thread we collect 59 loops. Knit 2 rows in garter stitch.
First. We must make the first loop edge, because this side will be facing the forehead, is in full view.
Next, knit to the end of the row.
Second. I think you understand that holes will remain from the shortened rows. After all, each time we turn the canvas without connecting it with the remaining loops. So that there are no holes at the crown, we use a simple technique - “entanglement” of loops (look at the video). We knit the first row from right to left. The edge loop counts as the first. When we reached the left edge, we do not knit six loops.
And here's what we do. We remove the extreme item from the left knitting needle to the right one. We throw a thread on left needle. We return the item - the thrown thread remains BEHIND it. We turn the knitting inside out. We continue on the wrong side to knit facial to the end of the row. The photo shows a finished loop, it remains only to move it to the right. Third. From the inside last loop it is knitted in the same way - for the front or for the back wall of the loop. Then the edge row will be neat. For example, I have it knitted behind the back wall.
When only one unknitted loop remains on the left knitting needle, to wrap it around it, we also remove it on the right knitting needle, throw a thread on the empty left knitting needle. The loop returns to its place.

We knit beanie hats like this

1 row - front: on the left there are six p. untied (abbreviated n / p). So, 53 loops out of 59 were knitted.
2nd row - purl: do not touch six points, they are already on the right knitting needle; 53 p. knit again facial.
3p: five p. n / p, knitted became 54.
4p: from the inside, knit 54 stitches.
5p: four n / a, knit-x 55 p.
6p: 55 p.
7p: three n / a, knitted 56 n / a.
8p: 56.
9p: two n / a, tied 57 n / a.
10p: 57.
11r: one untied left, knitted x 58.
12p: 58.

This is what the canvas looks like on both sides when the first “wedge” is connected. On the right side, the right edge is rectangular, and on the left, a wedge is formed.
Therefore, each wedge is created from 12 rows. Starting from the 13th p., Repeat the steps as in rows 1-12 - the next wedge will appear.
Here I measured the height of one wedge, fixing the beginning with a pin, it turns out that one wedge is a little more than 4 cm in height. In total, it took 13 wedges to knit a hat of this size.

Sew the garter stitch with a horizontal loop-to-loop stitch.

For knitting snood on knitting needles No. 5, we collect 50 loops and knit with a garter stitch to a height of 150 cm. We sew, like a hat, with a loop-to-loop seam. We moisten our kit and dry it horizontally.

Beanie and snood in garter stitch ready! Lungs to you loops!!

Greetings! I prepared a detailed case-MK on how to easily knit an ultra-fashionable beanie hat on knitting needles from thick yarn. In style, this is a loose long hat, stylish, textured and comfortable. Decorated with rich thread burgundy. On the crown is a handmade Dorset button.

Easy to knit and looks stylish. After all beanie hats coarse knit - « must have» accessory of all mods! The stylists claim that "a practical and comfortable beanie hat is a popular hipster attribute of many star people."

Attention: prepared a photo-MK of an updated version of such a beanie hat, see. The difference is that the hat has a protruding crown "with ears"!

I spent online on knitting such a beanie hat. Based on the results, I created a CATALOG of the works of online participants. It is very convenient in that each of the craftswomen gave a brief description of her hat: what threads were used, how many wedges were connected, etc.And most importantly, in the catalog you can peep great ideas how to decorate a hat. I am sure you will like how creatively many approached knitting such a seemingly simple model.

See the first catalog . An excellent hat is knitted in the same way, like Ville Valo, see article.

When I was looking for information on the Internet about how to knit such beanie hats in rotary rows, I did not find a detailed photo-MK. Therefore, I decided to make my own. I'll be glad if it helps you.

• Materials that are used when knitting beanie hats.
• An explanation of the process of how to knit a hat.
• How "shortened rows" are knitted - explanations.
• What is garter stitch.
• About junk (auxiliary) thread.
• How to knit the main fabric for a hat.
• How to sew a hat with garter knitting.
• How to neatly hide the tips

Dimensions: height 38 cm, unstretched circumference 54 cm. On OG from 57th.

To knit a beanie you will need:

- Yarn - 1) Russian weight, i.e. in skeins (I have the color "steel"). I wrote in detail about such threads in. Approximately 200 grams are consumed.
2) "Brilliant" Vita, p / w - 45% wool / 55% acrylic, 380m / 100g, burgundy, quite a bit - for finishing.

- Knitting needles No. 5 - circular or straight.

I used circular, Panorama firms. They have a good flagellum, which does not fold much, therefore, does not irritate when knitting). Showed and wrote about them. But, you can use straight lines. The main thing is that their length should be at least 45 cm, because we will dial the number of loops equal to the height of the beanie hat, i.e. almost forty centimeters).

- Hooks No. 3.25 and No. 2- if you also want to tie a hat around, for example, with a burgundy thread, like mine.

- A sewing needle with a large eye. We will sew by hand, so you should make sure that a suitable needle is at hand.

Fabric knitting algorithm

The bottom line is that we will tie the entire canvas across. That is, not from the crown to the bottom, or from the bottom to the crown, as many of us are accustomed to, but by cross knitting. At the end of the work, the panel looks like a cone. If you hold the finished hat in your hands horizontally, there will be a narrow end on the left - the crown, on the right - a straight one (knitted without cuts). Here is this one - connected in a straight line, with the side and a hat is put on the head (after stitching the two sides of the canvas).

The size (volume of the head, OG) is calculated by the number of connected rows. That is, if you want the hat to be smaller in volume, not so wide, knit fewer rows than mine.

And the height (depth, length) is determined by the number of loops typed. So, in order to knit, for example, a hat with a height of not 38 cm, but 25 cm, dial the loops not 59, but smaller.

For example, for a height of 30-32 cm, you need to dial 50 p

When the hat is knitted, the correct stitching of the fabric remains, because. no need to pull the top. It is obtained in finished form thanks to knitting with "shortened rows".

What is partial knitting, or "shortened row method".

If you have not used this method before, a brief explanation is given below.

How to knit in garter stitch

The entire hat is knitted in a simple and light garter stitch pattern. In which each row (front and back) is knitted with facial loops. As a result, both sides of the canvas look the same, that is, there is no wrong side. Therefore, you need to be able to knit only facial loops. In addition, the tying of the beanie hat is crocheted, " step by step».

Why do you need an auxiliary thread

For stitching garter stitch a method will be used in which open loops are needed. Therefore, we start with an auxiliary thread. It is also called "junk" or "additional". This means that the main thread is gray (steel), the additional one is any other (I have a weight one, in skeins, Pink colour). At the end of the add. we will unravel the thread (we will throw it away later) and we will sew the open loops with a gray thread.

We knit the fabric in short rows

So let's get started. We put two knitting needles together, with an additional thread we collect 59 loops.

We knit two rows with pink threads - from the faces. and from inside out. sides. face loops. Cut off auxiliary thread.

We tie the main thread of gray color. I do it this way: I twisted the loop, put it on the left knitting needle, next to the 1st loop, knitted them together.

First, let's go through two ordinary rows of gray yarn, so that when we unravel the auxiliary thread, we have a smooth edge.

We begin to knit in short rows. I would like to draw your attention to several important points.

First. We must make the first loop edge, because this side will be facing the forehead, is in full view.

How to make an edge? For beginners, I will show in detail, in steps. We removed the first loop without knitting, like this.

That is, they moved it to the right without knitting it. Knit the next to the end of the row.

Second. I think you understand that holes will remain from the shortened rows. After all, each time we turn the canvas without connecting it with the remaining loops. So that there are no holes at the crown, we use a simple technique - “entanglement” of loops. This is shown in detail below. Just do not pay attention to the fact that the number of rows in the photo is different, it so happened that I shot this moment several times.

We knit the first row from right to left. The edge loop counts as the first. When we reached the left edge, we do not knit six loops.

And here's what we do. We remove the extreme item from the left knitting needle to the right one.

We throw the thread on the left knitting needle.

We return the item - the thrown thread remains BEHIND it.

We turn the knitting inside out.

We continue on the wrong side to knit facial to the end of the row. The photo shows a finished loop, it remains only to move it to the right.

Third. From the inside, the last loop is knitted in the same way - for the front or for the back wall of the loop. Then the edge row will be neat. For example, I have it knitted behind the back wall.

When only one unknitted loop remains on the left knitting needle, to wrap it around it, we also remove it on the right knitting needle, throw a thread on the empty left knitting needle. The loop returns to its place.

We knit beanie hats like this

1 row - front: on the left there are six p. untied (abbreviated n / a). So, 53 loops out of 59 were knitted.

2nd row - purl: do not touch six sts, they are already on the right knitting needle; 53 p. knit again facial.

3p: five p. n / p, knitted became 54.
4p: knit 54 stitches from the inside.

5p: four n / a, knit-x 55 p.
6p: 55 p.

7p: three n / a, knitted 56 n / a.
8p: 56.

9p: two n / a, tied 57 n / a.
10p: 57.

11r: one untied left, knitted x 58.
12p: 58.

This is what the canvas looks like on both sides when the first “wedge” is connected. On the right side, the right edge is rectangular, and on the left, a wedge is formed.

Therefore, each wedge is created from 12 rows. Starting from the 13th p., Repeat the steps as in rows 1-12 - the next wedge will appear.

The following photos show all the wedges, in the order they appear in the process. I specially filmed everything so that you could see in advance what will happen as the hat is knitted. Click on one of the photos, then they will open in the form of a photo album, which is easy to scroll through.

From the front and back sides, the first wedge.

The rest of the wedges.

See how gradually the crown is formed from one end. Therefore, it will not need to be pulled together.

Here I measured the height of one wedge, securing the beginning with a pin. it turns out that one wedge is equal in height to a little more than 4 cm.

Finished with two rows without partial knitting, as I started. And two more r. pink, additional thread (to the crown and back). It is more convenient for me to sew when the loop is released from the thread, and not removed from the knitting needle. But, this is not necessary, I think you can leave them on the knitting needle.

We sew garter knitting with a horizontal stitch "loop to loop"

Let's start stitching. How to thread a thick thread into a needle, photo-MK. As we sew, we release the loops from the pink (auxiliary) thread. To start, remember I loosened the thread, without touching only the first row - in the image it is with open loops.

We observe the sequence of pulling the thread.

Along the way, the next loop is released from the pink thread. I start from the bottom. I put the needle into the first loop from the bottom up, i.e. from myself.

In the next p., the one next to it, on the left - direction of the needle towards you.

Next, we thread into the first p. of the upper side - in the direction away from us.

To yourself

Continue to the very crown. I hide the end of the thread with a needle. First on top.

Then - at the base of the beanie hat.

So, the beanie hat, made in garter stitch, cross knit, is ready. After hand washing, it took me a long time to dry. So I recommend washing in the machine. It remains to decorate the hat.

Beanie hat decor with burgundy thread

Tied like this. First, with crochet No. 3.25, I walked with a “crustaceous step” along the circumference of the bottom, capturing only the front wall of the loop. I hold my hat upside down.

Without tearing off the thread, I continue the “crawl step” along the two edges of the seam: from the bottom - up, then, from the crown - down. Two stripes of Bordeaux appeared.

What remains to be done? Nice to close these seams. To do this, I cut off a very long burgundy thread to connect the seams into one neat decorative row. At the crown, I threaded a thread into one loop so that the two ends hang parallel to each other. Then I do it this way. I cross the threads, with hook No. 2 (thin is more convenient) I stretch one end through the loop on the left.

Now I repeat with the second thread on the right.

Made a cross thread. And repeat all the steps again.

Now, if you leave a small area unsewn in this place and sew on the slider from the lock, you will get the effect of a “half-fastened zipper”!

She reached the end of the row, that is, to the base. There are several ends of thread gathered here. I cut off everything shortly, except for one, after tying it together.

I sew a hole together - the short ends of the threads are hidden in it. In the photo below, at the same time, she showed what the inside of a beanie hat looks like, tied “from the face” with a crustacean step.

I made a “Dorset button” and attached beanie hats to the crown. I prepared the case for a long time, because there were a lot of photos, 51. I could have missed something, ask in the comments.

Now you know how to knit beanie hats on knitting needles using the short rows method. As is often the case, everything is much simpler than it seems at first.

I hope the materials of the case will help you, and you will easily knit a stylish warm hat!

Sincerely, Saule Vagapova

Seal

I'll show you my hat pattern. The hat is knitted by alternating two threads, the fields themselves keep their shape perfectly. I knit these hats for both adults and children. The yarn can be any, for example, I have warm knitted from thick p / w, and white and lilac from cotton threads.

• interesting selection on the site !!!
• Children's hats, without adult models

For the first warm hat (with hearts) I give detailed description below. And on yellow and lilac (with big flower) there are large photo-MK in several parts, who needs it, please.

For knitting, I used two colors of yarn.

♦ yarn p/w (wool mixture) white color, thickness approximately 100 g/200 m, sold in skeins or in small balls of 50 g each, at a price of about 15-20 rubles.

♦ pekhorka yarn "Popular", lilac color, 100 gr./133 m, 50% wool, 45% acrylic, 5% acrylic.

♦ hook number 3

The stitches used are:

"Magic Ring" ("amigurumi ring", sliding loop) VP

– air loop RLS

Single crochet CCH

- a column with a crochet Reliefn.

front double crochet: elm. SSN, circling the item of the lower river. from faces. sides on out. side "cray step"

So, now the job description

She began knitting with a lilac thread, she knitted the top of her head. I made a magic ring.

2 row: from each CCH of the first row we knit 2 CCHs, of which - one relief column, the second simple, i.e. we alternate them. In total, it turns out already 24 CCH.

3rd row: we knit the first and second CCHs of the previous row with embossed ones; and from the 3rd CCH of the second row we knit a simple column, and immediately embossed from it. We continue like this until the end of the circle. You should get 36 CCH. At the end of a simple CCH, you need to knit into the base of the 1st relief CCH, then the seam will be invisible.

In the next rows, I made increments “by eye”, achieving the required volume of the crown.

When the crown was ready, I added a white thread. And she continued without additions, alternating the thread lilac and white. It immediately became noticeable that knitting continued not in breadth, but down. She knitted to the required depth of the hat, alternating * two embossed CCHs, 1 simple CCH *, where she knitted two double crochets in lilac color, and simple CCH in white.

The most important thing here is to knit patiently so that the alternation of threads goes evenly from the wrong side, and the pattern is neat. Then she tied the fields - with white yarn in two additions. I turn to knitting with single crochets, making a reduction in every fifth loop, i.e. two loops together. Then without cuts 2 rows. Then, to expand the fields, again in every 5th loop, I add 1 loop. I knit the fields, alternating CCH and embossed columns in each top of the column of the previous row. And she ended by tying lilac yarn in a circle with a “crustacean step”.