Good afternoon, dear mothers and fathers, grandmothers and grandfathers! Have you created Easter eggs with your kids yet? satin ribbons? Yes, not simple, but in the style of kanzashi or in the artichoke technique? And I was recently taken aback by such terms. And before you sit down at your desk and start practicing, I had to study the theory. I could not lose face in front of the younger generation. I advise you to take a short course of familiarization with tricky techniques.

In fact, there is nothing complicated. Kanzashi is the manufacture of ornaments from ribbons or fabric that are attached to a specific base. And at the word artichoke, a fruit with the same name pops up in my thoughts. This means that the decor will be in the form of teeth, corners, scales. They, again ta - ki, need to be attached to some kind of base. In our case, this will be an egg-shaped blank.

That, perhaps, is all. We have a general idea, we will deal with the details along the way. It's time to open a workshop for the manufacture of satin crafts.

How to make your own Easter egg from satin ribbons in Kanzashi style

Well, that's all, sit back, call on the help of the children, and create an Easter masterpiece of your name. Why are you worse than the famous Faberge? And to help you - step by step photos. With them it will be easy and simple.

What you need to have to prepare

• Plastic egg (you can take a wooden or plastic blank)
• scissors
• Multicolored satin ribbons
• Glue gun
• Double-sided adhesive tape
• Candle
• Needle and thread of matching colors
• Beads.

Prepare ribbons of different widths. In this example, 3 sizes are needed: 6 mm, 1 cm, 2.5 cm.

Step-by-step instruction

1. Wrap the workpiece thoroughly with tape.
   

   

2. Take the ribbon. Attach its tip to the top of the egg, wrap it from top to bottom. The craft will look more interesting if you select a 6 mm ribbon for the base. thick.

   

3. Apply the next layer with an overlap so that there are no gaps.

   

4. At the top of the egg, wind it crosswise. it important point. The ribbon will hold tightly, do not slip off.

   

5. At the end of the process, cut off the end of the ribbon and fix it at the bottom with glue. What did we get? Beautiful base. Already it delivers aesthetic pleasure. But this is not the limit, we move on.

   

6. Take a ribbon of a different color, preferably a contrasting one. You will cut flowers from it, so the recommended width is 1 cm.

   

7. Cut into pieces 2 cm long. These are the future petals. For each flower, you will need 5 pieces, so you can calculate the required number of pieces.

   

8. To give the segment the shape of a petal, singe it with a candle, make the top oval.

   

9. Gather the bottom of the segment into a fold, cut off the excess, gently burn with a candle.

   

10. Now you need to make the base for the flower leaf. Take a green ribbon with a width of 2.5 cm. Cut off a small piece, give it the shape of a leaf with scissors, singe the edges with fire.
11. Collect the flower. Take a needle and thread, string five petals. In the middle, insert a piece of wire with a bead (these will be stamens), pull the thread, fix it, cut it off.

    

12. Stick the flower on the green leaf.

    

13. Collect all the flowers in the same way.
14. Stick on the base.

    

You can add decor with beads, if there are any in the house.

Satin masterpiece is ready! We have successfully mastered the Japanese technique of decorating handicrafts.

Easter egg from satin ribbons using the artichoke technique

By and large, the artichoke technique is a kind of kanzashi. Now we are already literate, and we can draw certain conclusions. Progress on the face!

But now we will make a three-dimensional Easter egg, a kind of 3D one. We will succeed unusual craft, exclusive and beautiful. Reminiscent of a pine cone.

We prepare materials and inventory

• Styrofoam egg
• Multi-colored satin ribbons
• scissors
• Sewing needles with caps.

Select ribbons with the same width. The best option 2 - 2.5 cm.

Step by Step

1. Cut off a few square pieces. Set aside for the time being.
2. Cut the ribbons into lengths of 3 - 5 cm. The length depends on the size of the foam egg. The larger it is, the longer the ribbons need to be cut. Each segment should be folded into a triangle, with the corners bent inward. This will be one of the scales of a kind of cone.
3. Attach a square piece to the top of the foam blank. You need to fasten with sewing needles in the four corners of the figure.
4. Take cuts for scales of a different color. Fold the triangle, attach its top to the center of the square. Fasten only at two points at the base of the triangle.

   

5. Attach three more tape scales in the same way. We got the first tier of crafts. And look, it almost completely covers the square at the top. Only a small part of it is visible. This is clearly visible in the step by step photo.

   

6. For the second round, prepare cuts of a different color. Collapse the triangles, lay out and strengthen in a checkerboard pattern.
7. Decorate the entire surface of the workpiece in the same way, changing the color of the rows to your liking.
8. For the bottom 2 - 3 rows, reduce the length of the pieces for the scales in order to maintain the shape of the egg. There will be enough length of 2 - 2.5 cm.

   

9. Cover the base with a square piece of tape.

   

Easter souvenir turned out great! Oh yes we are, oh yes well done!

How to decorate an Easter egg by combining kanzashi and artichoke techniques

Easter eggs made using two techniques are stunningly beautiful. The materials used are the same, only the step-by-step actions here are special, like the craft itself.

We have already studied the basics of styles, I will not repeat myself. I’ll just point out in what sequence to decorate.

1. The workpiece is pasted over with vertical stripes of a satin ribbon of the same color. Here you need to remember the lessons on mastering kanzashi.
2. Next, you need to proceed to the design of the lower part of the egg with artichoke scales in a checkerboard pattern. Lush bottom must be made from ribbons of a contrasting color.

The combination of styles allows you to admire magnificent Easter souvenirs. Flowers, beads pasted on a smooth surface can give them a special charm.

Easter egg on a stand made of satin ribbons

I liked the idea of ​​placing the Easter egg on a decorative stand. And both of them are decorated with satin ribbons.

Work materials

• Paper (notebook sheets are best)
• Satin ribbons in two colors (width up to 1 cm)
• Wide green ribbon (5 cm)
• Scissors
• Cardboard
• Double sided tape
• Candle.

step by step process

1. Crumple the paper, give the shape of an egg.
2. Tape the workpiece with tape.

   

3. Glue the ends of the ribbons of two colors to the top.

   

4. Glue at the same time. At the opposite end of the workpiece, the ribbons are interchanged. And one more thing: the ribbons must be glued overlapping each other in order to eliminate gaps.

   

5. After the entire surface is decorated, secure the ends of the ribbons with tape.

   

6. Cut out a circle with a diameter of 6 cm from cardboard.
7. Cut a piece 10 cm long from a wide tape.
8. Fold it in half from the inside, cut diagonally.
9. From the ribbons of the primary colors, make a decor in the form of flowers, glue them to the top of the souvenir.

   

This is the beauty you can make at home. It would seem that everything is so simple, but it looks like elegant, right?

Could you make such an Easter egg?

Yeah!Nah, it's too hard)

I don’t know about you, but my hands just itch to do something else with my own hands for Easter. It's such a fun activity. I think that our master classes should be continued. What do you think?

Do-it-yourself decorative Easter eggs are the most incredible, unusual and varied crafts for the bright holiday of Easter. Skillful beadwork, resembling Faberge jewelry eggs, unusual pasta figures, similar to refined golden filigree, marvelous little things made of paper and thread using decoupage technique, which are the embodiment of the most magical hand-made trend ... And what about the interior eggs from patchwork and satin ribbons in the style of "kanzashi" and "artichoke". They bring an atmosphere of joyful celebration into the house, complement the atmosphere with traditional Easter elements, give joy and positive emotions both adults and children.

After watching our best master classes with photos and videos, you will learn how to make extraordinary Easter eggs from improvised materials for a kindergarten gift or home decor.

Do-it-yourself decorative Easter eggs for kindergarten - decoupage ideas

Decoupage is an amazing technique that allows you to turn the most typical and unremarkable thing into a real piece of art. But the most paradoxical thing is that in the course of such needlework it is not necessary to use rare materials, tools and skills. It is enough to get blanks that are suitable in shape, a couple of themed napkins with an Easter pattern and several tubes of glues and varnishes. In addition, the ideas of decoupage Easter eggs are very fresh and relevant - why not use them when making a festive craft for kindergarten.

Necessary materials for decoupage Easter eggs in kindergarten

• egg shaped cardboard blanks
• decoupage paper in gray and blue-green tones
• white and blue acrylic paint
• decoupage glue
• decoupage varnish
• mother-of-pearl varnish
• stamps
• black, gold and silver pigment inks
• thin wire
• decorative elements (cuts, carvings, beads, lace, feathers, rhinestones)
• scissors
• glue gun

A step-by-step master class on creating Easter decorative eggs with your own hands using the decoupage method

1. Paint a foam or cardboard blank for decoupage with white acrylic paint.
   
2. Prepare silicone stamps in the style of "retro" or "Provence". Choose black ink.
   
3. On decoupage paper, leave black prints with stamps.
   
4. Tear the sheet into small pieces and paste them over the workpiece using special glue.
   
5. Using a stamp of a different configuration, leave golden and silver prints on the glued egg.
   
6. Cover the easter egg matte varnish. After complete drying, glue the product with white cotton lace using a silicone glue gun.
   
7. Tie a cord over the lace. Fix with glue.
   
8. Insert a beautiful decorative feather into the knot of the bundle, glue a few mother-of-pearl beads.
   
9. Pull a thin wire through the top and bottom holes in the egg. Wrap the upper segment with a loop, and put on a few decorative elements on the lower one.
   
10. In a similar technique, you can make a simplified version of the Easter egg. To do this, cover the inner surface of cardboard eggshells with designer paper in blue-green tones.
    
11. Paint the outer surface of one half with white acrylic paint.
    
12. Color the other half blue.
    
13. Tear off the desired ornament from a thin napkin or decoupage card and glue it to the center of the white shell using glue.
    
14. Add additional prints of other colors in the same way.
    
15. After complete drying, glue the Easter egg around the perimeter with semi-beads or rhinestones.
    
16. Glue a decorative dragonfly to the product. Do-it-yourself Easter egg for kindergarten in decoupage style is ready!
    

Bright Easter eggs from satin ribbons or patches with your own hands in the style of "artichoke"

colorful Easter crafts- artichoke-style eggs are an unusual and original decor created by hand from satin ribbons and cotton patches. Colorful textile elements with checkered and floral patterns, successfully combined in color scheme - perfect choice to make Easter eggs not just stylish decoration but also a spectacular holiday gift for loved one appreciating beauty.

Required materials for an Easter egg made of patches and ribbons in the style of "artichoke"

• foam blank "egg"
• patches of four colors
• needle with thread
• ribbons, braid
• carnation pins

Master class with a photo on creating an Easter egg in the artichoke style with your own hands

Amazing do-it-yourself Easter eggs from beads: a master class with a photo

A great way to have fun and usefully spend family leisure time on the eve of the bright Sunday of Christ is to make amazing DIY crafts: cardboard baskets, felt rabbits and, of course, beaded Easter eggs. Gather everything at one table, take out a scattering of bright beads, unwind a piece of nylon thread - and enjoy needlework with a pleasant home conversation.

Necessary materials for crafts "Easter egg from beads" with your own hands

• blank made of plastic or wood 6-8 cm high
• fine beading needle
• Czech beads different colors
• kapron thread

Master class with a photo on creating an Easter egg from beads with your own hands

1. Thread a needle with a nylon thread into the first random bead three times. Thus, you can fix it at the end.
   
2. Following the pattern, start weaving a belt for the Easter egg.
   
   
3. Continue weaving the girdle to the desired length - the volume of the egg.
   
4. Connect the edges of the belt, threading a nylon thread through the extreme beads.
   
5. To prevent the belt from hanging on the workpiece, make an additional top and bottom row tighter.
   
6. Start braiding the crown, making a line of one color. To do this, put on one bead and pass the needle through every second in the already existing row.
   
7. Continue alternating bead colors, drawing out patterns. Perfectly combined blue-red-green-gold.
   
8. Narrow the knitting with beads by threading the thread through 2 or 3 beads.
   
9. Finish the bottom crown by decreasing the beads in the row. Make the middle with a large bead or the same small beads.
   
10. Finish the top of the Easter egg in the same way.
    
11. Instead of ornate openwork patterns you can weave the usual parallel rows.
    
12. Pass the thread through the last bead three times to secure it firmly. An amazing DIY Easter egg from beads according to a master class with a photo is ready. Find a worthy place in the festive interior for crafts or give the product to a dear person.
    

Easter eggs in the style of "kanzashi" - DIY crafts from satin ribbons

Stylish and elegant, kanzashi-style satin ribbon eggs make a great decoration for an Easter tree, mantel, chest of drawers, and even a dining table. Thin mother-of-pearl ribbons give the products a special chic, and primitive execution allows anyone who wants to become the author of such beauty.

Necessary materials for Easter eggs from satin ribbons in the style of "kanzashi"

• styrofoam egg blanks
• satin ribbons 0.5 cm wide
• glue gun
• decorative elements (sequins, beads, beads, etc.)
• scissors

Master class on making crafts - an Easter egg from satin ribbons

DIY interior Easter eggs from pasta: a master class with photos and videos

Extraordinarily beautiful, almost perfect Easter eggs from pasta delight, touch, delight the eye. But to envy the owners of such decorative crafts not worth it. It is better to take an ordinary Balloon, get all sorts of different pasta from the kitchen shelf and make a delicious Easter figure with your own hands according to our master class with photos and videos.

Necessary materials for DIY Easter eggs from pasta

• curly pasta
• glue gun
• PVA glue
• balloon
• CD disk
• metal bell
• paint gold or silver from a balloon

Master class with a photo on making an interior Easter egg from curly pasta

Easter eggs with your own hands from pasta and paper, from beads and threads, from satin ribbons in the style of "kanzashi" and "artichoke" ... Options holiday crafts many many. Choose a suitable master class with photos and videos and start creating an Easter souvenir.

For the bright holiday of Easter and kindergarten, and at home, children, together with adults, can make a variety of crafts in the form of Easter eggs. They can be pasted over, painted, decorated with beads and sequins. Adults and teens can try making amazing DIY kanzashi or artichoke Easter eggs using regular satin ribbons. All products attract with ease of manufacture and no need to purchase special materials. For example, you can use regular pasta for work. As blanks, foam eggs are used, which are sold in stationery stores or stores. children's creativity. The proposed master classes with step-by-step photo and video descriptions tell how to create an unusual decor from different materials. Handmade Easter eggs are perfect for decorating the house and for congratulating loved ones.

How to make do-it-yourself kanzashi Easter eggs from satin ribbons - a step-by-step video master class

It is quite easy to work in the kanzashi technique, given that there is no need to weave the ribbons intricately. That is why many needlewomen want to learn how to make Easter eggs with their own hands from kanzashi satin ribbons. With proper consideration of the distribution of materials and their subsequent fixing, from the first attempt, the finished craft will be even and neat. Additionally, it can be decorated with transverse ribbons, ribbon flowers or beads, beads. And when you achieve sufficient experience in making such a decor, you can safely make similar Easter eggs with your own hands from threads. The procedure is performed in a similar way, but requires additional fixation of the material on the foam base.

Video master class on making Easter eggs from satin ribbons using the kanzashi technique

A simple and understandable master class will tell you how to learn how to make Easter eggs from ribbons using the kanzashi technique. Finished products can be given to friends, colleagues or used for holiday decoration rooms. The indicated decorating options for crafts can be changed to other lighter ones or the egg can be left without additional decor at all.

Bright Easter eggs in a new artichoke style with your own hands from satin ribbons - photo and description of the work

Beautiful satin crafts ideal for giving to relatives and friends. Making Easter eggs with your own hands from ribbons is not difficult, and with the right decoration, they will look both stylish and catchy. To assemble the craft, you do not need special skills, but you need to carefully attach the pins, trying to minimize damage to the fabric. The instructions below will tell you how easy it is to make Easter eggs with your own hands from artichoke-style satin ribbons.

Materials for making artichoke-style Easter eggs from satin ribbons

• satin ribbons with a width of about 2-2.5 cm in different colors;
• foam egg;
• carnation pins.

A step-by-step description of the work of assembling an Easter egg artichoke from bright satin ribbons

Making Easter eggs with your own hands from beads or sequins - photo and video master classes

Easter eggs decorated with beads or beads will look original and can become good decor for home for Easter or an excellent present to friends and acquaintances. Do-it-yourself crafts such as Easter eggs are assembled for quite a long time and require special attention. Therefore, the use of beautiful sequins will help to simplify the task and make no less bright, but simpler products. How to make Easter eggs with your own hands from the photo is described in step by step master class.

Materials for making an Easter egg with your own hands from sequins

• a set of plain or multi-colored sequins (with them, the blank will turn out to be original and bright);
• carnation pins;
• foam egg.

A step-by-step master class on making an Easter egg from sequins - with detailed photos

Video master class on the technique of making an Easter egg with your own hands from beads

Making Easter eggs with your own hands from beads and a wooden or foam blank is somewhat more difficult. Such work requires the ability to connect small parts, make neat transitions between separate parts beaded cloth. An example of how to make a beautiful and simple beaded egg for Easter can be found in the following master class:

Funny and original Easter eggs from ordinary pasta with your own hands - step by step instructions

An unusual egg-shaped craft made from ordinary pasta is great for making by adults with children. Kids can quickly figure out how to make an Easter egg with their own hands, and moms and dads will help them carefully glue the pasta and color the craft correctly. Special skills or patience are not required to assemble such a decor: it is very simple to perform. Even the kids from the kindergarten can make beautiful Easter eggs with their own hands from pasta.

Materials for making original Easter eggs from ordinary pasta

• different types pasta (from large horns to small stars);
• plastic egg;
• glue "Moment";
• spray paint;
• bright beads.

Master class on assembling Easter eggs from ordinary pasta with your own hands

Simple and beautiful Easter eggs for kindergarten with your own hands - crafts using decoupage technique

Many crumbs will like the transfer of napkins to the workpiece and will make it possible to make a very bright and unusual decor for the home and garden for the Easter holiday. It is within our power to do DIY Easter eggs in kindergarten for both secondary students and students preparatory group. For work, the baby can independently choose original and cool napkins. At the same time, carefully decorating Easter eggs with paper with your own hands is completely simple: you just need to soak it. The rules for transferring pictures to Easter eggs with your own hands are set out in a master class for different techniques.

Materials for making beautiful Easter eggs in kindergarten using decoupage technique

• napkin with a bright pattern;
• empty shells from white eggs;
• brush, PVA glue;
• thin lace;
• scissors.

Master class on making simple Easter eggs using decoupage technique

Bright and fun Easter eggs from all kinds of materials are a great option for decorating your home for the Easter holiday. You can use these crafts for festive decoration classrooms in kindergarten. At the same time, collect original crafts the children themselves can too: unusual Easter eggs are created from ordinary pasta with their own hands. In the work, you can also use beads, sequins. They will help to make bright and shiny products that can be presented as a gift to relatives and friends. In the considered master classes, you can find and detailed descriptions making Easter eggs using kanzashi and artichoke techniques. They are assembled from satin ribbons and can be additionally decorated with beads, beads or ribbon figurines. step by step photos and video tips will help you accurately and correctly make bright crafts.

Presented Easter product in the form of an egg, decorated beautiful flowers kanzashi will definitely inspire you to new creative experiments. Let's start festive master class with a detailed list of necessary fittings. It is imperative to study it, especially for beginner craftswomen, in order to rationally distribute materials. You can exactly repeat the same egg for a festive table decor or as a gift, or change the colors of the base ribbon, flowers and stand. You can complete the accessory, focusing on detailed master class. A creative lesson does not require much from you, all steps are easy to complete.

To make the same Easter decoration you will need:

• - for the leaves of the nest, pieces of green satin ribbon measuring 1.2 * 5 cm - 24 pieces;
• - double-sided red stamens for the stand - 12 pieces;
• - for flowers, squares of yellow ribbon measuring 2.5 * 2.5 cm - 15 pieces;
• - for buds, pieces of green satin ribbon measuring 1.2 * 8 cm - 3 pieces;
• - for the centers of flowers, unilateral red stamens - 9 pieces;
• - green felt base for a nest with a diameter of 3.5 cm;
• - decorative wooden egg;
• - satin ribbon to cover the egg white color 0.5 cm.

Easter egg - execution steps

1. Use all the prepared green segments of the rectangular satin to create leaves of an unusual oblong shape. Bend the rectangles along the center, leaving the wrong side of the satin inside. Bevel one side with scissors literally 2-3 mm. Then singe the beveled edge and fasten the hot satin with your fingers. Leave the burnt part in this position, and turn the bottom one forward. Wrap the two corners of the bottom side into the workpiece, forming a sheet of sharp unusual shape. In the center, the sheet should expand, and at the edges it should narrow.

2. Make 24 leaves out of green rectangles. They will be spent on two layers of the base. But you can make more layers if you wish.

3. Cut out a felt circle (preferably green). Glue the first layer of leaves in a circle. They should stand side by side, without gaps. Glue a stamen with red heads on top of each sheet, having previously bent each. The red color will stand out against the background of greenery, so the composition will become elegant. These balls look like ripe berries.

4. Glue the second row of greenery, it is better to offset each leaf in the gap between the first two to get a lush effect.

5. Prepare the central egg. Stick a ball of white satin on it, evenly distributing the turns.

6. Make convex blanks yellow color for flower petals from squares. Bend the squares diagonally, fold again, close the sharp ends together and turn the resulting leaves inside out. Focus on the photo. Petals are made according to the method of modeling ordinary single sharp parts.

7. To simulate three bright inflorescences, prepare 5 yellow petals and 3 bunches of red stamens (of three pieces).

8. Also separate the strips of green satin ribbon prepared for the sepals diagonally with a soldering iron. Cut them up and use only one piece.

9. Open the sepal and insert a flower with a red core into it, after gluing the parts in a circle.

10. Three main details for creating an Easter souvenir - a green nest decorated with a ribbon, a wooden egg and three bright flowers.

11. Glue the flowers to the egg for a beautiful arrangement of your own. Instead of intermediate leaves, you can use the rest of the cut green ribbon that remains after sepal separation. Arrange the leaves between the flowers so that the sharp tips show through beautifully.

In this master class, you will learn how to make an Easter souvenir - an egg from satin ribbons using the kinusaiga technique and the artichoke technique.

Kinusaiga is Japanese patchwork technique, otherwise this technique is called a patchwork without a needle. This technique consists in the fact that first a drawing is created on paper, which is transferred to a wooden base. Recesses are cut in the plank, the fabric is cut into small pieces with allowances, the edges are tucked into the prepared grooves. Today, instead of wood, foam is used as a blank, which can be easily processed with a knife.

Using the kinusaiga technique, you can create very beautiful boxes, paintings, panels, toys. This technique is very widespread in the manufacture Christmas decorations and Easter eggs - souvenirs.

The artichoke technique is also a kind of patchwork, it got its name because of the similarity finished products with artichoke flower. Triangles are folded from square or rectangular pieces of fabric and attached to the foam base with pins.

An Easter souvenir made using such techniques can become a decoration in your home or great gift holiday for family and friends.

Master class "Easter souvenir - an egg from satin ribbons"

You will need:

Stages of work:

1. Divide the egg-shaped foam blank into 6 equal sectors with lines emerging from the center of the sharp end of the egg and connecting at the center of the blunt end.

We make cuts along the marked lines with a clerical knife so that they are at least 0.5 cm deep.

2. We cut satin ribbons (blue and purple) into segments 14.5 cm long. We need 3 pieces of blue and purple ribbon.

We give the segments the shape of sectors, but a little bigger size by cutting off the corners. Burn the cut edges.

Then we put the first flap on the workpiece and carefully tuck the edges into the slots with the help of a stack, slightly stretching and straightening the tape. In the same way, we close all the other parts, alternating colors.

3. We close the seams with a golden ribbon or braid (lace).

Do not forget to singe the edges of the segments with a lighter.

The first row is made of gold ribbon. We fold the square diagonally to make a triangle, and then fold it in half again. We fix the lower corners of the triangle with clerical pins in the middle of the egg, as in the photo. In the same way, we attach five more triangles around the entire circumference of the egg. The first row is ready.

The second row will be made of blue ribbon. We fold the squares in the same way into triangles. We attach them to the foam egg just below the first row at the bottom corners.

The third row is made from the same color as the first. We fix the triangles between the triangles of the second row in a checkerboard pattern about 0.5 cm lower.

We attach the next 4th row of 6 purple modules in the same way, but just below the third row.

5 row - again golden triangles, while the tops of the triangles should be between the triangles of the fourth row (in a checkerboard pattern).

6th row - blue triangles, just below the 5th row.

7th row - golden triangles, we also place their tops between the triangles of the 6th row.

8th row - again purple triangles, just below the 7th row.

9th row - golden triangles, we place the vertices between the triangles of the 8th row.

We complete the 10th row with blue triangles located just below the 9th row.

5. We cut a satin ribbon 2.5 cm wide into segments of 10 cm (6 pcs.) And 12 cm (6 pcs.)

We make the next 11th row from segments 10 cm long. Fold the segments with a loop, as in the photo below and attach with pins.

The last row is made of segments 12 cm long. We also fold them with a loop and fasten them with pins, placing them between the petals of the 11th row.

We close the middle with tape.

6. We decorate each sector of the egg with sequins. You can glue a half-bead to the top of the egg, and attach a loop of narrow ribbon to the base, and you will get an Easter pendant. The souvenir is ready!

See the video for more details on how to make an Easter souvenir:

Olga Baranova