New Year is the most fun and most children's holiday. Even adults are not afraid to look ridiculous in red Santa Claus hats and with a bunch of gifts. What can we say about the children, who in this joyful mess are trying to participate in all matters! The main attributes of the New Year are Santa Claus and a Christmas tree. Traditionally big Christmas tree decorate with toys and tinsel, dance around her. But what if you make an unconventional Christmas tree? beautiful tree do-it-yourself paper will not claim to be the centerpiece, but it can decorate a children's room or become a souvenir gift. Believe me, such a Christmas tree will find a use for itself.

Is being done Christmas tree paper, cardboard, color and corrugated paper, tinsel and any other improvised materials. It is easy and fun to do: the kids take part in the work with great pleasure. Two-year-old children, for example, can roll up plasticine balls, which will later become a toy, or glue a small piece in the place indicated by adults. And the memories of joint craft enough for a few days.

There are at least a dozen ways to make a paper Christmas tree with your own hands, but in any case, you will need:

• Paper (colored, corrugated, thick - whatever)
• ruler pencil
• Glue and stapler
• Scissors
• Sometimes a compass

Model No. 1. Volumetric paper Christmas tree

First, the base of the Christmas tree is made - a cone. If the tree is planned to be large, the cone is made of whatman paper (it can be replaced with four A4 sheets glued together). The center is marked in the center of the wide side, we draw lines from it to the two lower corners, cut it off (do not forget to leave an allowance for gluing), cut off the semicircular base, glue it, check whether it is even. On this basis - a cone - you can make several different options Christmas trees. You can get a big Christmas tree out of paper if you make a large cone, and a small one on a small cone. BUT different ways the manufacture of needles will generally be misleading: it may seem that these are different Christmas trees.

To make the blank cone look like a Christmas tree, we make needles from colored paper. Traditionally, the needles are green, but it can be assumed that there is snow or frost on the branches - the choice of color is up to you. We outline the rectangles: for the lower needles, the width of the rectangle is 7 cm. We make a trapezoid from the rectangle: the upper side is cut off. The wide side is folded into a triangle and fastened with a stapler or glue, it is convenient to glue the top to the cone.

Volumetric needles can be replaced with circles glued to the top. If you cut circles of different shades of green, the tree will look more original.

The needles are glued in rows, starting from the bottom. To make the Christmas tree look beautiful, every three rows we reduce the size of the needles. That is, we first draw rectangles of 6.5 cm, then 6 cm and 5 cm. We draw the top of the Christmas tree with a small cone, the bottom of which we cut with triangles. If desired, the Christmas tree is decorated with sparkles. You can use ready-made sparkles, you can finely chop the tinsel. Apply glue to the needles and sprinkle glitter on them.

The second version of the Christmas tree-cone

We build a frame, cut thin short strips from colored paper, wind each strip on a pencil. The stripes take on a twisted look. With a certain skill, you can twist the strips of paper with scissors: gently draw the blade of open scissors from one end of the strip to the other, while pulling the strip. Glue the twisted strips to the cone. You can decorate the Christmas tree with anything: sparkles, bows, balls, stars.

The third version of the Christmas tree-cone

Glue drop needles onto the prepared frame. We make needles from strips of green (or any other) paper, glue their ends together - we get a drop. Glue larger drops at the bottom of the cone, smaller ones at the top.

The fourth version of the Christmas tree-cone

Wide strips of paper cut into fringes are glued to the base. Again, the strips are wider at the bottom (respectively, the needles are longer), at the top the strips are narrower. The color of the needles can be any: green will make it natural, multi-colored - decorative. We cut the strips into small “needles”, not cutting to the end about 1.5-2 cm. After the glue dries, the needles can be bent upwards - carefully draw a scissor blade from the base of the needles to the ends. Such a Christmas tree made of corrugated paper will look beautiful.

Model number 2. Christmas tree made of paper and cardboard

A similar Christmas tree can be made from colored paper. It will require 4 sheets. Fold each sheet in half, cut out a triangle. The resulting parts are glued together and cut at an angle of the needle. You need to twist them before the glue has dried.

Model number 3. Christmas tree made of colored paper

For this model, you will need thick paper. It is done simply: cut out a triangle, fold it with an accordion, make a through hole into which we insert a stick-rod. To make the Christmas tree stable, the stick can be inserted, for example, into an eraser. Such a Christmas tree can become a small souvenir or decorate the workplace. Good New Year spirit she will definitely create.

Model number 4. Christmas tree in papercraft technique

How such a Christmas tree is made of paper, the diagram shows clearly. It is necessary to cut several circles of different diameters (the bottom of the Christmas tree - from circles of a larger diameter, the top - from circles of a smaller one). Circles are drawn and cut, needles are folded. Finished tiers are strung on a rod. We decorate the Christmas tree with sparkles, beads, foil bows - the fantasy is limitless.

Model number 5. folding herringbone

For such a Christmas tree, several circles of different diameters are cut. The diameter and number of circles depends on the desired size of the Christmas tree. Fold each circle in half 4 times, unfold and straighten the circles. The trunk of the Christmas tree can be made from an old pencil, a straw for a cocktail, a wooden stick - all this is wrapped in colored paper, the tip is glued. In the center of each circle we cut a small hole (it should be smaller than the diameter of the trunk in order to hold on tighter). Circles-tiers are strung on the trunk, starting from the bottom. A Christmas tree stand can be made from a wooden coil, cork, lid from plastic bottle, plasticine, glued from thick paper.

Model No. 6. Paper origami - Christmas tree

In this popular technique, you can make any figures, including Christmas trees. How a paper tree is made using the origami technique, the video will demonstrate better than any words. We offer two options.

But the third option is more difficult.

Model No. 7. Christmas tree in a hurry.

For this Christmas tree you will need a color printer, paper, scissors with glue, hands and a few minutes of free time. We print a Christmas tree template from paper, cut it out, fold it, glue it.

In addition to the main Christmas tree in the living room, large, richly decorated, you can make a Christmas tree with your own hands in each room. Our master class is dedicated to how to make it out of paper. But first, let's look at which paper Christmas trees are popular. They can be flat (on a wall, postcard, gift box) or voluminous (cone, "book").

Highly comfortable material for the manufacture of a Christmas tree based on a cone - corrugated paper. The cone can be made from cardboard, thick paper, or buy a plastic blank. Strips of corrugated paper are glued onto the cone in a circle or spiral from the bottom up.

According to another technique, individual petals are made from corrugated paper. Both stripes and petals can be made in one color, or you can take several close shades, then the tree turns out to be more picturesque, more natural.

You can make the Christmas tree cone unusual by taking not green, but, for example, pink corrugated paper.

You can decorate it with sequins, sequins, buttons, bows. Or collect beads on a string and hang them on a Christmas tree, or you can just let her wear her beads.

Instead of corrugated paper for making needles Christmas tree, you can use ribbons, fabric, lace.

You can corrugate paper by making small or large folds on the sheet by gluing the parts to the cone.

The role of a cone can be played by a bottle of champagne, and instead of toys, sweets are woven into paper needles. This bottle can be both a table decoration and a gift.

There is even an origami technique where the sheet is folded many times, very neat geometric models are obtained.

The most realistic spruce branches are obtained when cuts are made on strips of corrugated paper, needles are twisted, paper is wound on wire. Then small branches are collected into larger branches.

Flat Christmas trees made of paper

Corrugated paper can not only stick on the cone. It can be mounted directly on the wall, it is very convenient if there is not enough space. The Christmas tree on the wall can be made from anything, just observe triangular shape and tier. Thanks to the simple shape of the Christmas tree, it can be made up of any objects and materials: from paper stickers to shelves hung in the form of a Christmas tree.

Paper Christmas tree

There is another way to make a voluminous Christmas tree, without using a cone at the base. If you make 2 or more identical parts of a whole Christmas tree out of paper, stitch them along the vertical axis and lay them out like a book, you can get a very spectacular tree.

We propose to make just such a Christmas tree. If you choose a carved stencil, then it will become as elegant as lace.

Before we make a Christmas tree out of paper, we will collect everything necessary materials and tools. Of the materials we need: a stencil-pattern, watercolor paper and gouache. The thicker the paper, the better the tree will hold its shape after painting. Watercolor paper is designed for strong wetting, it will not warp from the water contained in the paint, but printer paper and drawing paper will not work.

You will also need tools: a sharp paper knife, paper clips, 2 brushes, a sponge for dishes, a needle and thread. Choose a clerical knife with breakable blades or a small construction knife. With a large brush or sponge we will paint the Christmas tree, and with a small brush we will draw stars and a crown on it.

First, print the stencil. We take 2 sheets of watercolor paper and put a stencil on them, fix them with paper clips along the edges.

It is important that the sheets do not move out when cutting. Place many layers of newspapers under the bottom, on a soft surface it is easier to cut and you will not ruin the table.

Cutting openwork blanks is the longest and most difficult stage. When it is finished, the most pleasant creative component comes.

Now the details need to be sewn. First, you can take a thicker needle, and how to make punctures along the stitching line at a distance of 0.5 cm from each other with an awl. Then sew through these punctures and hide the threads.

It's time to start painting the Christmas tree with green gouache. Gouache is good because, like all water-soluble paints, it dries quickly, lays down in a dense opaque layer, covering all previous layers, with it a bright matte surface is obtained.

After the green paint dries, and this will happen in an hour, you can begin to paint the details of the Christmas tree. Our stencil is very handy in this regard. The asterisks are well cut, and it will not be difficult to paint over them. I had silver, yellow and red paints. Instead of silver, white gouache with a drop of blue or red is well suited. Snow will be bright white, so it is better not to use it so that the details do not merge.

It remains to revive the Christmas tree with snow - drops of white gouache. We spray them with a large hard brush or brush evenly, preferably in the center. No need to try too hard to do it carefully, the snow sweeps as it pleases.

So we learned how to make a Christmas tree out of paper. This method is low-cost and fast, which means that it is possible to make a lot of Christmas trees using watercolor paper and gouache. Many of your friends will like this Christmas tree as a gift, because it can be put on New Year's table, windowsill. You can make this Christmas tree flat from one piece. Then it is good to hang it on the wall, window, glass door.

Simple paper Christmas trees

If you need a very simple way to make a Christmas tree out of paper, it is better to take colored sheets right away. If the tree is without a frame, then the sheets are thick: cardboard or thick colored paper for the printer.

With the book structure of the Christmas tree, it would be better to use PVA glue, and make New Year's toys on it from colored plasticine balls or cut from self-adhesive paper.

Quickly make Christmas trees from circles of various diameters, corrugated.

Such stylish minimalist models especially benefit from their conciseness when executed in small sizes and one color.

The Christmas tree is the most important idea for creativity in preparation for the New Year. Plots of New Year's cards, toys, home decorations revolve around her. And it is not surprising that even the ways of making a Christmas tree from such simple material like paper exists great amount. And each option is different from the other.

Some crafts are easy to make and even a child can make them, others require a certain skill, perseverance. Some models of volumetric Christmas trees are not ashamed to give, they look like works of art.

Selecting the required material

To make a Christmas tree out of paper with your own hands, a wide variety of paper and cardboard is used. In most cases, this is ordinary colored paper and cardboard, although Christmas trees made from corrugated paper also look interesting. In addition to colored paper and cardboard, often required:

• scissors;
• ruler;
• pencil;
• glue;
• stapler;
• stationery knife;
• wire.

For postcards: simple but original

First, let's look at Christmas trees that look great on postcards or as New Year's toys on big forest beauties.

A simple version of the Christmas tree is made up of several squares of paper or cardboard rectangles. different size:

1. Cut out five squares from paper from largest to smallest. If you're making a Christmas tree out of designer cardboard, cut out 2:1 aspect ratio rectangles and go straight to step 3.
2. Fold them in half.
3. Fold the top corners down towards the middle. So that the free edges are at the bottom.
4. Start gluing from the top.
5. The top corner of each module must overlap the previous part.

A similar modular Christmas tree is made up of 5 origami modules. This model, made of designer cardboard, can be hung on a Christmas tree. See step by step wizard Class. Squares can be made in any size, but they do not have to be the same. For example, make the largest square with sides 10 cm, and let the others differ from each other by one centimeter.

	Take square sheet designer cardboard.
	Fold it in half diagonally, then unfold and connect the other two corners.
	On a sheet of cardboard, you should get these fold lines.
	Now, along these fold lines inward, we start one of the faces of the cardboard pyramid.
	Then we put the opposite side inside.
	We smooth the folds with our fingers.
	On both sides, we got two free edges. We take the top layer by the corner and bend it to the middle of the triangle.
	We do the same on the other side.
	The module can be glued to the postcard using double-sided tape.
	Subsequent modules are nested inside the previous ones in turn. It turned out original Christmas tree. Glue a ribbon or thread through the top of the tree to hang it as a decoration.

We propose to study step by step instructions for the manufacture of a paper Christmas tree from loops. It is suitable for making postcards, appliqués or hanging decorations if you attach a loop to it. From the materials you need only a square sheet of green colored paper. Also, prepare a ruler, pencil, scissors and glue.

	We take a square sheet of paper. If you have an A4 paper, fold it diagonally with the sides aligned and cut off the excess.
	We retreat from the fold one centimeter and draw a parallel line with a simple pencil.
	Set aside one centimeter along one of the cut lines.
	Then we draw parallel lines, connecting the points with a line parallel to the fold.
	We cut two sides at once along the lines, having previously secured a sheet of paper with paper clips so that it does not move.
	Then we unfold the workpiece.
	Now the task is to glue all the strips to the middle. First, we perform the operation with one side. Then on the other.
	Cut off the top at an angle.
	At the top, you can cut a star out of red paper and glue it with glue.

To decorate a postcard, a Christmas tree made of paper tubes is suitable.

1. Need to cut a few strips different lengths from colored paper, cardboard, remnants of wrapping paper, wrappers.
2. A round pencil will serve as a template.
3. Just wrap a strip of paper around the pencil, placing it lengthwise.
4. Glue the tube along the cut.
5. From the finished tubes, form a Christmas tree.

The Christmas tree is placed not only outside the postcard, but also inside. When opened, the card turns into volumetric figure. And it's very easy to make it. It is necessary to fold several sheets of colored paper of different sizes with an accordion and glue it to opposite sides of the postcard.

Try folding a triangular sheet of paper like an accordion from the base to the top.

Volumetric models: schemes, instructions, master classes

Light options for voluminous Christmas trees can be made in half an hour with your child. And most of the time will take its decoration.

cone based

The easiest option is a cone made of colored cardboard or plain landscape sheet wrapped with colored paper or corrugated paper. First, take a sheet, roll it into a cone, secure the edges with a stapler or glue. cut the cone so that it is stable.

If corrugated paper is planned on top, then it is best to put it on double-sided tape. Cut off thin strips of tape and stick along the cone in several places. Wrap the cone with paper, tuck the excess edges inward.

You can decorate such Christmas trees with buttons, ribbons, bows, rhinestones, carved pictures, in general, whatever your heart desires. Decorations are simply glued on.

But this is a “smooth” Christmas tree, and there are also options with “needles”, also based on a cone. Corrugated paper "needles" may look like this:

Just make a fringe out of paper. After gluing the needles in a circle on the cone, you get the following result:

The needles can be curled a little so that it does not fit too tightly to the base, but is fluffy, for this they use a pencil or scissors. The paper is wound on a pencil, and the tip of the scissors is drawn along the fringe.

And how do you like the Christmas tree for the New Year, in which the needles are made of circles of green paper different shades? It looks beautiful, but the work is painstaking and will take time.

There is another manufacturing option.

The base is a cone, which is pasted over in a spiral with a pigtail of crumpled paper. Glue is applied to the base. The tape is slightly overlapped.

Video: how to make a corrugated paper pigtail for a Christmas tree

Fir-trees-vytynanka

Openwork voluminous Christmas trees, made of paper using the vytynanka technique, are original in themselves, and if they are also decorated with beads, then there will be no limit to their charm.

In order to make such beauty, you will need a clerical knife or nail scissors (they are not very convenient to work with), but first of all you need a template. Pre-print the template or simply transfer the drawing you like to paper from the monitor screen. It is best to cut the pattern with a knife, placing a wooden board. The number of parts at your discretion: from 2 pieces or more. The more details, the more magnificent the Christmas tree. When all the parts are cut out, put them together, sew with a running stitch with a needle and thread along and bend so that the sectors are evenly spaced.

We suggest you choose the appropriate templates:

We considered the case when the parts are fastened in the middle, but there are options when they are glued along the edges. For this, 4 parts are used. During gluing, the edges should be clamped with paper clips so that the parts do not stick out.

Origami

Previous options for making bulky Christmas trees have all involved cutting and gluing. But it can be done by folding. This method belongs to the ancient Japanese art origami. See how to make a figurine in the video.

Video: three-dimensional origami Christmas tree

Video: origami Christmas tree - variation

Modular

Paper Christmas trees, which are assembled from modules, are common. For example, from circles of cardboard. You will need:

• compass;
• scissors;
• wooden stick;
• glue;
• beads;
• base.

Draw a circle on a sheet of cardboard with a compass, cut it out. Fold four times. Cut off the tip from the top. Then form an accordion along the folds. Then you should string the parts on a skewer. They start from the top, glue is applied to the hole in the bottom part so that the part does not slide along the skewer. The basis can serve as a spool of thread, wine cork. The scheme is clearly shown in the photo.

Modules are also performed using the quilling technique. For example, from 9 tiers of 6 quilling droplets in each, a wonderful Christmas tree is obtained.

In addition to paper, you will need scissors, glue and a wooden skewer.

1. Cut out narrow strips from a sheet of paper.
2. Fold the droplets and rings using the quilling technique.
3. Make a base around the skewer.
4. Put a ring on the skewer, secure with glue.
5. Then assemble a module of six drops, gluing them together, and put them on a skewer.
6. Then again comes the ring and the new module.
7. So alternate to the very top.

Note! Modules must be different sizes. Start with the largest in diameter, end with the smallest.

It is quite difficult and time-consuming to make a Christmas tree that looks like this:

Video: making a corrugated tree

This is another stylized Christmas tree made of round elements. To make it, you will need several circles of paper of different diameters and a wire on which these circles will subsequently be fixed. The circle is divided into 12 sectors with a pencil, cut them without reaching the middle and glue each petal.

The process is shown in detail in the video.

Video: making a needle Christmas tree

And one more interesting option- from newspaper tubes.

CHRISTMAS FROM A SHEET OF PAPER A-4 format. Master Class.

NEW YEARS IS SOON!!!
Today I want to tell you how to make a cute small Christmas tree from a sheet of plain A-4 office paper.
Photos in the album “HERRING FROM A SHEET OF PAPER A-4 format. » ya-romashka on Yandex.Fotkah

! For this Christmas tree, I did not use anything that would have to be specially bought in a store. What you need for this Christmas tree is always at hand!

Paper for the Christmas tree needs to be chosen denser. The standard width of an A-4 sheet is 21 cm.
I marked and traced stripes (3.7cm-3.4cm-3.1cm-2.8cm-2.5cm-2.2cm-1.8cm-1.5cm) using the entire sheet.


She cut the sheet into strips.

Then I folded the strips into accordions, with an edge of 0.75 cm.


It turned out accordions of different widths.


Now I cut one end of all the accordions at an angle of approximately 45 degrees.


This cut will make the tree more interesting.


With an ordinary office hole punch, I made holes on the ribs of the accordions, capturing 3-4 folds (as far as the hole punch allows).
! I make holes at the edges of the fold half the hole - they look more interesting (since the fold is folded in half - the hole is round).


The holes made on the edges of the folds look more interesting on the finished Christmas tree.


With a marker, you can tint the ends and holes of the accordions.


Harmonicas are ready.


I glued the edges of the harmonicas - crowns turned out.

I smeared the inner edge of the accordion with glue, gathering the folds together, but leaving two loose.


She unfolded the accordion into a pretty snowflake, holding the middle until the glue sets. Then I cut out circles from cardboard by hand and made holes in them.


Alternating snowflakes and cardboard mugs, I put them on a wooden skewer, starting with the largest one, after lubricating the mugs with glue on both sides.


A cute Christmas tree is obtained. Leave the tip of the skewer free for the crown.

Good afternoon dear friends. We continue to prepare for the new year and prepare crafts for this holiday that can easily be turned into gifts. In the last article, we analyzed in a general way, and today we will narrowly create Christmas trees. Link to previous article.

Today's crafts will be exclusively made of paper. And there are so many instructions that even a child can handle the creation of a Christmas tree with a normal approach. And if it seems a little to you, then you can try to make or create with your own hands.

In the meantime, we will begin to create beautiful forest beauties that will decorate your home throughout the holidays. And if you make a few pieces, you can collect a whole fabulous forest on the window.

Take a regular sheet of paper. Of course, ideally it is better to take green, but white is also suitable. We bend the sheet in two along the long side and apply the diagram shown in the photo below.

After drawing the pattern, cut along the lines and bend as shown below. We make three blanks, and then glue them together. It turns out very beautiful and stylish. I am sure you will not see such Christmas trees anywhere else.

The following set of templates for making will allow you to create a 3D Christmas tree. You need to save and print the templates. We draw the diagram on a sheet of paper folded in two along the long side. And then cut out.

We cut out along the main contour, and where the lines go inside, we only cut. We bend the cuts at the end. Here, too, it is necessary to make two identical blanks in order to glue them at the end and get the volume.

If there is a desire, then you can cut out not just a Christmas tree. And a Christmas tree with a deer or a small Christmas tree standing next to it.

If desired, any craft can be painted to distinguish it from the rest of the Christmas trees. You can also use paints that glow in the dark.

And here is the proof that the kids love to needlework on their own.

Here are our beauties and ready. It turned out just gorgeous. How do you like this idea?

For the next Christmas tree, it's better to take it right away colored paper and make a green Christmas tree right away. The tree is obtained created from eyelets and curlicues.

On that account, if something was not clear to you from the photo, I will leave a video clip on creating such a masterpiece.

Christmas tree in origami technique (a simple diagram for children with a description)

Many have been able to fold various figures from a sheet of paper since childhood. Well, remember the airplanes did or the boats did all this simple technique origami. And I just can’t help but talk about the fact that you can make a Christmas tree using the origami technique.

In order to fold the Christmas tree, you need to find an old book without a thick cover or a scribbled notebook. Found? Now let's continue, we wrap all the pages from the left corner to the middle. And so each. Therefore, a book that is too thick will not work.

Then once again we bend all the pages into a bag.

The lower tail will need to be cut with scissors. Try to do everything slowly and carefully.

The product is completely ready. It remains only to straighten all the pages and sprinkle with sparkles.

How about this idea. The Christmas tree is made a little more complicated, but it turns out more beautiful. First, practice on a white sheet, and then when you understand the whole process, you can do it from green.

The next beauty can be offered to make the kids at the labor lesson in primary school. All instructions are provided below.

How to make a voluminous Christmas tree from corrugated paper for the New Year 2019

As promised above today will be various options making forest green beauties. And for the next craft, you will need special corrugated paper or crepe paper. You will get a very beautiful Christmas tree.

You will need to find:

• cardboard or thick paper
• corrugated green paper
• scissors
• red paper
• various bows
• beads

Production stages:

We make a beautiful tall cone out of cardboard and glue it with green paper.

Make the strips about 10 cm long. We wrap each strip on a thin wooden stick or on a small brush to make such a bud.

Fluff each bud and glue to a paper cone. On a cone about 10-15 cm high, you will need to make over a hundred of these curls. To decorate the Christmas tree, you can use both ready-made bows and homemade ones. Christmas balls can be made from cotton balls sprinkled with sparkles.

If the first option is too difficult for you, I suggest another option for making Christmas trees from corrugated paper. It is less labor intensive.

We make the base of the Christmas tree from cardboard. Srep paper will need green color 18 cm wide and 2 meters long. We fold it in two along the entire length. We apply glue on the edge, leaving a free strip of 2 cm.

We glue and tighten to make a small skirt.

Next, with this blank we decorate our cone in a spiral. Don't forget to glue the strip to the cone. At the end, we decorate with impromptu toys.

Or here's another option for making a New Year's beauty. We cut multi-colored strips 2-3 cm wide and wrap each strip of cardboard cone to the very top.

Or you can do it like this.

New Year's beauty from colored paper and cardboard

To make such a Christmas tree, you need to make some blanks of three semicircles of different diameters. On each semicircle we make small incisions to make a fringe.

After using scissors, we twist the fringe. And we glue the cones from the blanks. Well, further, on a large cone we put on less on the middle smallest one. At the end, we will make a beautiful star.

And here is a similar option, but only in the video there is a small life hack how to quickly and beautifully cut these circles.

But such Christmas trees will look very organic on holiday table. Everything is made from the same paper circles various shapes. By the way, if the issue of making salads is still open for you, here are some tips for you.

Or here is such an option for making Christmas trees from simple wrapping paper.

Well, if you want to make something big beautiful and warm, you can make a big beautiful New Year's beauty. To make a large Christmas tree, you need to glue several sheets of cardboard. Twist a cone out of them.

Wrap the resulting cone in beautiful wrapping paper.

After removing all unnecessary, decorate the Christmas tree with impromptu toys and an asterisk.

You can also make a Christmas tree out of cardboard, but we will not make cones.

You will need to print this stencil.

Next, we cut out the resulting stencil, apply it to the sheets of cardboard, circle it and cut it out. Fold in the middle. We make 8 identical blanks.

We will go through the edges with a hole punch. If there is a figured hole puncher, you can use it. We glue the middles with double-sided tape.

After we sew with white threads along the holes made. And cut out an asterisk.

At the end, it is desirable to decorate with artificial snow and white sparkles.

From paper circles and a wooden stick, try to make such a multi-colored Christmas tree.

Or try to make the same Christmas tree from candy wrappers and magazine clippings. At the end, coat the Christmas tree with glue and sprinkle with flour or sugar.

You can glue a Christmas tree out of paper handprints. Preschoolers will love this one.

And here is another master class for creating a Christmas tree from a glossy magazine.

And with such a Christmas tree you can decorate your workplace. You will need a green sheet of A4 paper. We cut out a triangle, in the middle we make a hole with a standard hole punch. We unfold the accordion and put it on an impromptu trunk. Which can be made from the same sheet of paper twisted into a tight tube.

On the Internet, you can find such tips. By the way, individual elements can be used as decoration for the space around them.

A Christmas tree made of loops is something new, I really wanted to do something like that myself.

Another option for making crafts from loops.

Here is another idea on how to make a Christmas tree from improvised means.

Let's go back a little to decorating the office table. The next Christmas tree will be made from reminder leaves.

And even a schoolboy will cope with this task.

Maybe you have not tried to make a quilling Christmas tree yet? So here's a good idea for you.

Master class on making a New Year's tree from napkins

Yes, yes, even from napkins you can make a beautiful New Year's beauty.

To make you look so beautiful. You need several layered napkins. We draw circles on a napkin, cut out and in the center each circle is chopped off with a stapler. After each layer, crumple forming a circle. Here are some photo tips to help you.

You can arrange such a Christmas tree in the style of a topiary.

Tree stencils for cutting and printing

If you prefer the style of vytynanok and you like painstaking work. I propose to make a Christmas tree to decorate windows. Using this template, you can make a Christmas tree in 3D.

We will make slots in one workpiece from the top and the other from the bottom. And let's put them together.

The stencil is printed.

It is folded in two and gradually cut out.

One craft is assembled from two blanks.

And here are just your templates that will help you create this amazing beauty.

Do-it-yourself volumetric Christmas tree for a New Year's card

Certainly each of our friends or acquaintances under New Year will wait for gifts and congratulations. And for each gift or congratulation, you can make an original postcard. And I will help you with my tips on how you can make a beautiful postcard out of paper with your own hands.

To make the most a simple postcard you will need to print a small blank. Make cuts along the lines and bend and glue to the main background.

If something is not clear to you, here is a help in the form of a video clip.

Or try making a postcard like this.

Paper Christmas tree on the wall

Who said that crafts should be small and remote. I propose to make a large Christmas tree that will be mounted on the wall. There are immediately finished options, and there is an option in the form of coloring that you can color as you wish.

The first Christmas tree will be like this. We will make it from cut strips.

The second option will need to be downloaded and printed. Then collect on a large sheet of whatman paper.

Of course, these are far from all the options for Christmas trees that can be made to new year holidays and decorate your house, office or room with them. But these options seemed to me the most beautiful and more New Year's. I congratulate you on the upcoming new year.