According to one version, it is believed that Spain is the birthplace of the bolero. Why not, because the bolero could only appear in a hot and sultry country. The exact date of his birth is unknown to anyone, but it is assumed that the 17th-18th century.

Initially, the bolero did not have sleeves and belonged to the men's national costume. Later, the courageous bullfighters dressed in a bolero with a sleeve.

Another version suggests that the bolero is the outfit of women who danced the dance of the same name. In theory, no matter how and when this garment appeared, we should be grateful to the story that the bolero remains fashionable today.

Bolero fashion today

In the 21st century, men do not wear boleros, only women have retained their love for him. And many fashion designers include different forms of bolero in their collections.

Women love the bolero for its versatility, it goes with almost any look and style of clothing. Unless you can’t wear it to the office, although cropped jackets and jackets can be called a boleroshka with a stretch.

Modern stores offer us to purchase a bolero from very different texture materials:

• Knitted from yarn
• Made from suit fabric
• Denim, etc.

And since our site is dedicated to knitting, we have prepared a selection of knitted boleros from different types yarn, with and without sleeves, openwork and warm.

What to wear with a bolero?

Bolero goes very well with different clothes. Here for example, knitted dress and boleros complement each other perfectly. In summer, in the heat, a bolero can be worn with a T-shirt or top in combination with shorts, trousers or a skirt. A flying skirt, a knitted bolero - just imagine what a romantic look you will get!

And in the fall, with jeans, a bolero will emphasize your waist and keep your hands from freezing. So choose the most beautiful boleros and knit for your pleasure!

Crochet bolero for women

An openwork bolero goes well with summer things, such as sundresses and knitted skirts. Summer bolero can be complemented with ballet flats or sandals.

Bolero made on the basis ribbon lace. Used Spanish yarn Katia capri (skein 50 gr. thread length 125 meters) Hook 2.5. Bolero size 42. It took 3 hanks.

Ribbon selected:

How to knit, description

Bolero "Bruges Spring" Technique: crochet Size: 46-48 Materials: this bolero is knitted Yarn: Vita cotton VEGA composition: 65% viscose, 35% cotton color: yellow 5356, green 5364 Model description source: model Natalia Sukhikh, MOD magazine No. 2(548) My changes: a different collar, ties on the sleeves,

Bolero "Fuchsia". Technique: crochet. Size: 46-48. Materials: this bolero is knitted Yarn: Magic MICROFIBRE composition: 100% microfiber, color: fuchsia - 3445. Model description source: RANKDARBIAI 2008 magazine Graceful bolero is knitted using the Bruges lace technique, the base is decorated with an openwork mesh (my change from the original model) and floral motifs. Crochet bolero patterns

Bolero-shrug Julia with pineapple pattern

Technique: crochet. Size: 42-44 - amber bolero, 46-48 - young greens. Materials: Amber bolero - yarn: PNK im. CM. Kirov "Narcissus". composition: 100% mercerized cotton. color: amber-0510. Materials: Young green bolero - yarn: Vita Crystal. composition: 100% acrylic. color: young green - 5656. Model description source: Japanese magazine "Let's knit series nv4265 2007 crochet lace kr". Scheme

Openwork bolero white crochet yarn "brazil crossbred" 50% merino, 50% acrylic knitted for myself. The patterns are taken from a fashion magazine.

Bolero size: 44.

You will need: 300 g mercerized cotton Pink colour(165 m / 50 g); hooks No. 2 for motifs and No. 2.5 for a dense pattern.

The details of the shelves, the yoke of the back, the lower part of the back, and the sleeves are made of separate motifs grouped into medallions and interconnected in the process of work. In order for dimensions finished product corresponded to the plans (see Fig. 7), it is necessary to start by linking patterns of motifs according to schemes 7, 7 a and 7 b and check them for compliance with the sizes indicated in figure 7 a.

Then proceed to the implementation of a single lace detail (see Figure 7 b), consisting of 16 medallion blocks, assembled according to the scheme 7 c and 4 according to the scheme 7 d. Next, tie the lower part of the sleeves. To do this, combine the motifs into medallions according to scheme 7 e and assemble a circular canvas from them (see figure 7 c). The next step is to complete the middle part of the back with a dense pattern. First, knit a row according to scheme 7e (to align the upper part of the lace fabric), continue to work according to scheme 7g.

Connect the bottom of the back yoke to the middle piece. Perform the upper part of the sleeve in accordance with scheme 7 h, having previously completed the leveling row (sh. 7 f). Sew the finished sleeves into open armholes as follows: fold the details of the jacket and sleeves facing each other and knit 1 row of RLS along the contour of the armhole in the girth of two parts.

Bolero "Silver openwork" in black Technique: crochet Size: 46-48 Materials: this bolero is connected Yarn: Vita Crystal composition: 100% acrylic color: black - 5652 Model description source: author Anna Proshina, magazine KNITTING FASHIONABLE AND SIMPLE SPEC . № 6 2011 Bolero description Size: 38. You will need: Bright yarn (80% polyamide, 20% metallic, 340 m/

Openwork bolero size 44 is knitted from SOSO yarn. The product took about 200 gr. The bolero was knitted according to the pineapple pattern from top to bottom.
After the “pineapple” pattern, she knitted with double crochets and air loops to the desired length of the product.

Bolero in style Irish lace 48-50 size. About 300 grams of thread went to the product: "Narcissus", "Pelican", "Iris", "Sapphire". Hook 1.0, 1.25 "Clover". I ordered these hooks via the Internet, they are very convenient to use.

A charming red bolero goes well with black and white clothes.

Crochet bolero sizes: 36 (38/40) 42.

For knitting a bolero you will need: 150 (175) 200 g of red yarn Merino Lace (100% merino wool, 350 m / 25 g); hooks No. 3.5 and No. 7.

Border: 1st p .. alternately 1 st b / n and 5 air p., introducing a hook into each row
2nd row: knit in the same way. but with offset. Knitting density: Embossed Art. s / n: 26 p and 17 p. \u003d 10 x 10 cm: st, s / n: 20 p and 11 p. "10 × 10 cm.

Description of the crochet bolero

Crochet No. 3.5 tie a chain of 48 (50) 52 air. p. and knit embossed st. s / n. Through 224 (244) 264 cm from the typesetting edge, connect the last row with the 1st p. to form a ring. The left edge becomes the outer edge, the right edge becomes the inner edge. Then tie the inner edge, starting from the arrow A. crochet N 3.5 double thread 1 p. Art. s / n, resulting in a rounding of the part. Then, for the back, tie between arrows A and B with crochet No. 3.5 with a double thread 84 (92) 100 st. s / n and knit st. s / n. at the same time, for armholes, leave on both sides 4 (5) 6 tbsp. s / niv each row at the end of the row 4 (5) 6 times knit 2 st s / n together = 68 (72) 76 st. s / n. After 20 (21) 22 cm from the beginning of the back, knit 1 p. Art. b/n. then tie the edges of the back 1 p. Art. b/n. Then sew the details, combining * with * and ° with ° according to the pattern.

Sleeves: crochet No. 3.5 tie a chain of 26 air. p. and tie 60 (64) 68 cm with embossed st. s / n. Tie one edge of the sleeve with a double thread of st s / n. at the same time, in the areas of the armhole, pick up the part = 45 (49) 53 cm. Crochet the second edge with a hook No. 3.5 with a border.

Assembly: tie the edges of the bolero with a crochet No. 3.5 border. Sew on the sleeves, while pinning the short side, which is the same size as the armhole, so that the beginning and end are aligned at the shoulder. Then overlap the short sides of the sleeve and sew the seams of the sleeves. Turn the collar to the front. For each side, crochet No. 7 with a thread of 10 additions, tie a chain of air. p. 45 (49) 53 cm long. Sew on the sides along the armholes.

Red bolero, crochet- the work of Anna Sadovskaya.

The size bolero: 50.

For knitting you will need: ghazal threads, 100% cotton in 50gr/200m, 450 grams.

You can knit from the leftovers - the whole product took less than 50g of thread. Knitted bolero "Rings" - the work of Lyudmila Anufrienko. Bolero "Rings" first knitted from acrylic - the rings turned out to be large. And this is the second bolero - made of 100% cotton. Hook number 1.3.

Bolero. knit a rectangle of the desired size according to scheme 1 (the number of loops is a multiple of 6, as far as I remember, I had 168 loops), sew the sleeves. tie in a circle according to the strapping pattern (rapport 21 loops, I got 10 rapports), I also made a fastener, but this is how you like it.

You will need 300 grams of cream-colored yarn, 50 grams of contrasting color yarn for tying, crochet No. 2.5.

Knitting density: 1 square 15x15 cm.

Work description:

Tie a chain of 12ch. cream thread and close it in a circle. Link 8 motifs according to scheme 1. When knitting the last row of the second and subsequent motifs, connect the motifs according to the pattern.

Link 2 motifs according to scheme 2.

Run shoulder seams.

According to scheme 4, knit a sleeve, about 8 cm. Next, perform 3 rows according to scheme 5.

With a cream thread, tie the resulting bolero in a circle - 4 rows according to scheme 4.

Tie a bolero in a circle and sleeves with a contrasting thread according to scheme 6.

Bolero. Size 46-48, knitted from threads Kartopu kristal 100 gr. - 450 m., in one thread, hook No. 1.1. The whole product went 2 skeins of yarn. The bolero is knitted in one piece with the "Spiders" pattern. I started knitting from the back with the main pattern and then along the pattern, making expansions and decreases along the pattern. The pattern is very convenient, as it consists of rhombuses and it is easy to make subtractions and additions. I drew an approximate pattern, as I worked only by the standards, without a pattern. Schemes of the main pattern, strapping and bolero pattern are attached. Good luck and light loops! The work of Elena Shlyakova.

Bolero crochet "Chinese fans"

The openwork bolero "Chinese fans" is connected according to descriptions from the Internet. From the threads "Peony" PNK them. S.M.Kirov, composition 70% cotton, 30% viscose; 200 meters 50 grams, it took 6 balls, crochet No. 1.5. Perfect for formal occasions on a summer evening. Hand wash recommended, line dry. The work of Vera Koval.

Bolero knitting pattern

Bolero “Agate” is crocheted using Irish lace technique. Yarn "Violet" 100% cotton and yarn "Tulip" 100% microfiber for finishing on the mesh "Canaris" 100% cotton. Yarn made in Turkey. The bolero is connected according to the MOD 555 magazine. The work of Elena Pavlenko.

Description of the bolero (Irish lace technique)

first, a pattern is made, mounted on a tablet (from foam rubber or insulation). Next, motifs from “Violet” yarn and “Tulip” trim are knitted, crochet No. 1.25 According to the scheme. The diagrams are correct. But I changed them a little. We make a composition on a pattern. Place the elements face down. We fasten the elements with pins.

Next, we knit an irregular mesh with Canaris yarn, crochet No. 0.5. We remove parts of the blouse from the tablet and patterns and steam it under the iron. We fasten the side seams and undercuts to the tablet with pins and knit a mesh between the parts. We hide the tails with a needle. The seams are not visible. We steam the product under the iron. The product is ready.

How to tie a bolero, patterns

I was asked to knit such a model in size 46-48. Knitted yarn Yarnart begonia 50g 169m hook 2.5. Marina's work.

Bolero knitting pattern

Black openwork bolero with a fan pattern, crocheted No. 1.0. Yarn Pelican, size 44-46 took 2.5 skeins. I started work with round motifs on the back, then knitted fan motifs in a checkerboard pattern. The motifs on the shelf are knitted a little obliquely.

Blue openwork bolero. The bolero is crocheted No. 1.0 with a beautiful fantasy pattern. Bolero tied around the contour beautiful harness. Yarn 100% cotton. Can be worn with a dress, blouse, golf.

How to crochet a bolero for a girl

Girls like to dress up, especially to wear unusual things, and boleros are no exception. Tie or buy a bolero for your daughter, it looks beautiful with elegant dress. A bolero in nautical style- white and blue can be worn with shorts.

For the flower and buds, I used Romanian cotton threads "Romana", and for tying the threads "Tulyp". The bolero consists of 2 round motifs connected by a needle.

Bolero for a girl of three years in the style of Irish lace. Threads-Turkish cotton, for motifs; for mesh-thread canaris different colors.Hooks 0.9 for motifs; 0.75 for mesh. I used about 200 grams of thread.

Crochet bolero patterns

Bolero for girls size 40. For the bolero we needed 130 grams of yarn "Belarusian volume". Hook number 2. We knit in two threads. The whole length of the sleeve is 55 cm. The length of the bolero is 36 cm, the width is 40 cm. The bolero for the girl,

Openwork bolero for a girl - Marina's work

Light, lacy, openwork cape, bolero is a great addition to any outfit. Openwork bolero is knitted from the finest 100% cotton from pelikan yarn. It took 1.5 hanks (330 meters in 50 grams). In the photo, the bolero was connected complete with a skirt.

Green bolero for girls

Bolero size: for 2-3 years.

To knit a bolero you will need: 100 g of green yarn (100% acrylic). Hook No. 3. Abbreviations: air loop (vp), single crochet (st. b / n), double crochet (st. s / n), connecting column (connect. st.).

Fantasy pattern: according to the scheme.

Description of knitting bolero

For the back, knit a pentagon according to the pattern. In the 13th r. perform armholes by typing on both sides of a chain of 32 in. p. each, while skipping 12 p. Continue knitting according to the scheme, repeating the 14th and 15th p. total 4 times, and cut the thread.

The spectacular bolero of Zoya Leporskaya is not difficult to knit, but how much joy you can bring to your daughters.

Bolero size: 110-116.

Description of knitting bolero

The model is crocheted. You will need: 150 g of yarn (100% cotton, 440mm 100 g) white color; hook number 2. Before starting work, make a pattern in life size according to their size. According to the pattern knitted according to scheme 34 and the patterns, make a knitting calculation. Tie the details of the shelves, back and sleeves strictly following the pattern. See diagrams 34 a, 34 b for the formation of armholes and neckline.

Connect the parts at the shoulder and side seams. Stitch the sleeves into the armholes. Along the perimeter of the canvas, make a ruffle trim as follows: 1st p.: * 1С1Н, 1VP *; 2nd p .: in each cell from the VP, knit 4-5 C2H; 3rd p .: * 5С2Н, "pico" *. On the details of the shelves, make ties as follows: tie chains from VP, tie them with connecting posts, make spirals at the ends, knitting 3C1H from one loop.

Knitted openwork bolero for girls. This work was sent by our regular reader and needlewoman Marina Milokumova. Marina writes that her goddaughter really asked to knit a bolero. She knitted according to her taste, the model was taken from the aspen. Knits easily and quickly. One skein of Narcissus left, hook number 2. It seems to me that it turned out a great thing for the summer.

Pineapple bolero for girls

High degree of difficulty. Size: for 4-5 years.

You will need: 100 g of cream-colored cotton yarn; hook No 2.5.
Crochet technique: a chain of air. p. (v.p.), half-column (p / st.), single crochet (st. b / n), double crochet (st. s / n).

Knitting density:
The first 4 p. square motif = 10 x 10 cm,
crocheted No. 2.5.
Square size = 28 x 28 cm.

Work description:

Backrest: consists of one square motif.
Dial a chain of 6 ch, close in a circle with one p / st. in the 1st v.p. and in the resulting circle knit:
1st row: 16 tbsp. s / n (replace the 1st st. s / n with 3 vp); close this and all the following rows with one p / st. to the initial p.).
From the 2nd to the 15th row: knit according to the scheme; at the end of the scheme, break and fasten the thread.

Right shelf: consists of one part of the square. Knit according to the appropriate scheme and perform in a circle the part indicated in gray, rows back and forth the part indicated in black. At the end of the scheme, cut off and fasten the thread.

Left shelf: knit symmetrically to the right shelf in the same pattern. Sleeve: Each sleeve consists of one square. Pick up loops and knit like a back.

I sewed rhinestones in the middle of each motif, it turned out very elegant.

Knitting pattern for bolero shelves

Bolero crochet video tutorials

In addition to complex openwork schemes bolero or in the technique of Irish lace, there are also simple circuits knitting. It is especially easy to knit them together with video tutorials.

How to crochet a simple bolero for beginners

For knitting, you will need YarnArt Jeans yarn and hook No. 2.5-3. The bolero consists of two parts: a grandmother's square and tying it in a circle.

The video should load here, please wait or refresh the page.

Bolero crochet square

The video should load here, please wait or refresh the page.

Cape - bolero, knitted with a simple pattern

A step-by-step and understandable video on knitting a very simple and very comfortable bolero, simple pattern. The simplicity and convenience of this cape is the main feature of the image for a woman of any age.
Yarn Sapphire from Vita, 50% wool, 50% acrylic, 100g - 250m, 3.5mm and 3mm hook. Yarn consumption 4 skeins.

The video should load here, please wait or refresh the page.

Bolero is a universal item in the wardrobe of any girl. It can be worn under trousers with a T-shirt or top, with a dress or skirt. Today we want to tell you how to crochet it: diagrams and a description will help you in your endeavors.

Openwork boleros can make even the simplest costume elegant:

Bolero crochet for girls 7-10 years old

No girl will remain indifferent to such a delicate beige bolero:

To connect it, you need to follow the scheme:

For such a bolero you will need:

• 100% Merino Caricia yarn. Color: linen
• Accessories: a button in the color of the yarn
• Hook 1.75

Bolero knitting descriptions:

The right part of the bolero: we knit a chain of 13 air loops and start an openwork pattern, as in scheme B - from the first to the thirtieth row. Cut the thread.

Left side: same as right side.

Bolero back: knit a chain of 10 air loops, then according to scheme A - an openwork pattern from the first to the thirtieth row. The thread is being cut.

Bolero sleeves: we knit a chain of 81 air loops. We use the openwork pattern of scheme C from 1 to 22 rows. We cut the thread.

Assembly: all elements at the seams. And we tie them in one row with a single crochet, and make 1 row of teeth, as in diagram D.

Bolero crochet for baby

Boleros on babies look very touching and gentle. Therefore, we have a wonderful crochet bolero pattern for a 1 year old girl. In the photo, it is complete with a dress that can also be crocheted:

To knit this bolero you will need:

• White yarn (100 grams, cotton and acrylic 55/45)
• Hook 2

Description of knitting bolero:

Back: Work in 19-1 from center around the circumference. The diagram shows circles. Back size 22*22.

Shelves: knit according to the scheme 19-2 in circular rows, starting from the center. We knit the shoulders in straight and reverse rows. Shelves size 14*22. Shelves should be 2 (right and left). The right front is knitted from the circular part from the 1st to the 8th row, and the shoulder is knitted from the 9th to the 20th. To form the neck, it is necessary to reduce the loops, as indicated in the diagram.

Assembly: all elements are sewn together.

Warm crochet bolero for a girl

The bolero plays not only a decorative and beautifying role in a child's outfit, it can also be very warm and keep the girl warm in cool weather.

We offer you such a warm crochet baby bolero: diagrams and descriptions are attached:

Such a long bolero covers the back of the baby well, the high collar warms the neck.

It is knitted according to the following scheme:

To knit this bolero you will need:

• Acrylic yarn of several flowers
• Hook

Work description:

This bolero is knitted in the round in one piece, except for the sleeves, which are then worked into the armholes.

Let's start crocheting a bolero for a girl:

1. We collect five air loops, which we close in a ring, and then we knit in a circle. We alternate different colors - according to the scheme.

2. After the part is connected, we tie it with a “fan” pattern, according to the 3rd scheme.

3. We knit 36 ​​loops to the armholes and begin to knit the sleeves, according to the 2nd scheme.

4. We oblige the sleeves in the same way as the main product according to the 3rd scheme.

5. Knit decorative elements according to the 4 scheme. These will be flowers with which you can sheathe a bolero for beauty in the form of a brooch.

Bolero perfectly helps little fashionistas to solve the issue of regular change of images and styles, because the same thing will look completely different in a duet with two different models bolero. Not to mention the fact that these beautiful capes not only decorate, but also protect from the coolness in the off-season.

Modern bolero models have long gone beyond their classic look: from the top of the Spanish national costume they have been transformed into a purely feminine mandatory attribute of the wardrobe. Now the cuts of these jackets can vary: be elongated; similar to vests; have absolutely incredible patterns or be the most simple and light.

The choice of bolero models for women and girls is great, but most of them can be created with your own hands if you find suitable schemes with descriptions of knitting or crocheting. In this article, we will pay special attention to crocheting jackets for girls.

The scheme and description of crocheting a bolero for a girl

Crocheting a bolero is a pleasure, because there are a lot of models of this product: for summer or for winter; openwork or dense; short or long; with fasteners, sleeves, collars, coquettes or without them. These knitted jackets look good with most outfits - both casual and formal. And complete with other products made in the same style, boleros on girls look very interesting and stylish.

A simple model for beginners

Let's start by creating a simple crochet bolero for a girl - knitting for beginners will be available thanks to step-by-step photos. This article will be useful to those who want to try their hand, but are not sure of the knowledge. To crochet a bolero for a girl, beginner knitters will be able to do it if you use detailed master class With step by step photos work.

Popular articles:

Bolero size for girls:

for 5-6 years, height 116.

Materials for work:

• yarn Pekhorka "Children's cotton" (330 m / 100 gr) - 150 gr;
• hook number 2.5;
• satin ribbon in tone, 0.5 cm wide, about 2.5 - 3 meters.

You can use any yarn of the same thickness, and to get a warm version of the bolero, it is better to take a wool-blend yarn.

Back knitting pattern:

Important: the end result of knitting a product may differ from that shown depending on the density of knitting, the manufacturer of hooks and knitting needles, so it is important to compare your product not only with the attached description, but also with the size of the pattern.

Knitting back

We collect a chain of 82 air loops + 3 air loops lifting and knit according to the above pattern, starting with 1 air loop. The first row of alternating double crochets (CCH) with air loops (VP). It should turn out to be 34 cm long. We knit the second row according to the scheme: 4 air loops, 5 double crochets. Run 2 air loops of the pattern and knit in the 4th loop of the bottom row (skip 1 double crochet, look bottom row) 3 double crochets in one loop.

Run again 2 air loops of the pattern. The first report of the pattern is finished. Further 5 "intermediate" columns. Let's look at the diagram. We knit the third row according to the scheme, while 3 columns knitted in one loop are now knitted together. It turns out "diamond". We knit a row of columns with a crochet / 1 air loop.

In the next row, we shift the pattern by half the report in a checkerboard pattern (see the pattern diagram). Then we knit the 6th row of "diamonds". Next, we knit with a pattern according to the pattern until we reach a back height of 8 cm (at the same time, we control the width of the product 34 cm: we lay out the product a little stretch so that the width is 34 cm, then we measure the height). You can close the loops for the armhole simply by applying the product to the pattern drawn in full size, or you can do it according to the attached scheme.

Next, three loops are knitted to close the armhole. We make 3 lifting air loops, replacing them with the first double crochet in the diamond pattern. Then you need to knit according to the pattern. Without knitting 3 loops to the end of the pattern, we knit 2 double crochets in a row at the end of the row. In the next row, you need to close one loop on each side. To do this, 3 lifting air loops are knitted and immediately after them a double crochet is knitted, thereby closing 1 air loop located between the double crochets. We knit a row according to the pattern, closing 1 loop on the other side (according to the scheme). On this, the armhole cutout is ready.

Next, you need to knit in the pattern straight until the height of the product reaches 21 cm. Fasten the thread, leaving the end longer for stitching the shoulder seam (about 50 cm, I can’t specify more exactly, it’s better to leave a little more). The knitting of the back is completed.

Knitting flowers and sleeves

Wrap the thread on your finger once and knit 1 air loop and 1 single crochet into the resulting ring. This will be the beginning of the series. Run 10 air loops and knit a single crochet into a ring. It turned out the basis for knitting a petal. Run 6 such rings for the petals, while finishing the last chain with a connecting loop in the first single crochet.

We perform the petal according to the scheme: 3 single crochet, 5 double crochet, 2 air loops, 5 double crochet, 3 single crochet. Repeat the pattern for all six petals. We close the row with a connecting loop, stretch the thread to the wrong side and cut it off, leaving 8-10 cm. We tighten the middle of the flower by the first end of the thread and tie the tails of the threads together. The first flower is ready. Next, we will knit flowers, connecting them into a bar of 5 motifs in the process of knitting.

We carry out the first row of the flower (the first paragraph of the subparagraph). Next, we tie the first petal completely and the second before the beginning of the air loops.

We make one air loop, put the first flower on the hook front side to yourself for an arch of 2 air loops, we perform the second air loop, thereby connecting 2 flowers at the tops of the petals. We complete the binding of the second petal.

Tie the third petal to the middle and connect it with the next petal of the first flower. Finish knitting all the petals of the second flower. Knit a bar of 5 flower motifs in this way, connecting them with each other for 2 opposite petals. At the edges there is one free petal.

Then you should perform the same bar for the second shelf (another row of 5 connected colors). Scheme of strapping the right shelf:

Tying motifs 1 row. We begin the binding from the extreme left motive. Insert a hook into the arch of 2 air loops of the third free petal (we count from below, from right to left, see photo and diagram) and knit 2 single crochet stitches. We carry out the binding of motives carefully following the scheme. Knitting goes in a circle counterclockwise. We complete the row with a connecting column in the first column without a crochet.

Scheme of strapping the left shelf:

We carry out the binding of the left shelf in the same way, starting from the third petal, but starting from the rightmost motive. We carry out the first circular row of strapping. Next, we knit according to the scheme only along the inner edge of the shelf. The result is 3 finished bolero parts. We immediately sew the side and shoulder seams to see how the bolero will sit on the child and to make it easier to control required length sleeves and armhole depth. We carry out the first row of tying the edge of the product according to the scheme (a single crochet, 4 air loops, a single crochet into the next double crochet of the previous row, the bottom and neck are tied through a column, see photo and diagram).

The second row of tying the edge of the product is shells of 4 double crochets in a single crochet of the previous row and a connecting loop in an arch of 4 air loops of the previous row. In the corners of the neck, instead of a shell of 4 double crochets, perform 1 double crochet so that the neck lies flat and does not turn out to be a stand-up collar.

We start knitting the sleeve by completing 3 floral motifs, in the process of knitting, connecting them into a ring.

How to tie a sleeve according to the diagram in step-by-step photos:

Please note that in this bolero model, the sleeve length reaches the phalanges of the fingers and the thumb sticks out into the floral motif. If you want to receive classic sleeve- shorten the knitting of the main pattern by the desired number of centimeters (5-6 rows - put the vest and sleeve on the child, and attach the edge of the sleeve to the edge of the armhole at the side seam). At this stage, circular knitting ends and then we will knit in turning rows, closing 1 loop on each side in each row. So we knit 7 rows, decreasing in each row 1 loop on each side. The total length of the sleeve is 41 cm, excluding the binding of the sleeve, which is carried out in the following paragraphs. The sleeve width is 11 cm (full girth 22 cm). We tie the bottom of the sleeve according to the scheme above.

The finished bolero must be slightly steamed from the wrong side in the "cotton" mode, while you should not press the iron, hold it slightly overhang so that the product retains its knitted relief. You can also steam the product through gauze or a white diaper. In the edge of the product between the shells we pass satin ribbon, tie in a knot, and then another knot over the edge of the bar so that the ribbon “sits in place” when tying the bolero. We also thread the tape into the sleeves.

Beautiful product for a girl of 3 years

To please the baby with a new thing, you can make a little effort and knit such a beautiful jacket with your own hands. Let's take a closer look at how to crochet a bolero for a girl of 3 years old with a description and diagrams. This product can also fit a 3.5 year old baby.

Materials for work:

• 100 g of threads in the color of baked milk (92% acrylic, 8% metallic) 400 m / 100 g;
• hook number 3;
• button in tone.

Work schemes:

Before work:

Before you start creating a bolero, you need to make a pattern in full size taking into account the individual parameters and measurements of the girl to whom the bolero is intended. Next, you need to tie and steam a sample of 10 x 10 cm with the main pattern for the preliminary calculation of the loops.

Progress:

We will knit a bolero from the bottom up with one canvas. We collect the required number of v.p.

First r. 3 v.p.p., 3 tbsp. s / n, * 1 ch, skip 1 loop, then knit 4 tbsp. s / n *, continue from * to the end of the row. Finish a number of Art. s / n.

Second r. The whole row is knitted with arches from 5 ch, fastening from 1 tbsp. b / n in 1 cp first row

Third r. We knit similarly to the second arches of 5 ch, we fix them with 1 tbsp. b / n in the middle of the arches of the second row. But you need to start with 3 vp. and finish 1 tbsp. s / n.

Fourth r. 3 vp, we knit arches from 4 vp, we fix them st. b / n in the middle of the arches of the third row. Due to the fact that we started and finished the third row higher, the fourth row will turn out to be even for knitting the fifth row.

Fifth r. fit in the same way as the first. In every 4 v.p. we knit st. s / n, and over art. b / n we knit 1 ch

For a pattern, repeat knitting 4 rows.

When the first 4 rows are knitted, it is necessary to knit further with increases according to the second pattern for the next 13 rows, then knit 8 rows without increases and decreases. Next, you need to divide the canvas into 5 parts. On the pattern, we have 19 cm for the right and left front shelves, 10 cm for the armhole and 20 cm for the back. Your numbers may be slightly different depending on the individual parameters of the girl. Designations can be made with a thread of a contrasting color, a pin, or a special plastic marker that can be bought at a needlework store.

Shelves

We knit with an openwork pattern. We make the loops decrease along the outer edge in accordance with the pattern and the first diagram, which shows how to evenly decrease the loops. It will be approximately 23 rows in height.

Back

We knit straight without increases and decreases to a height of 23 rows.

Sleeves

It is necessary to attach a thread to the 4th row of the back, tie 35 ch. and stick on the shelf. Now we need to knit 8 rows in a pattern without additions and decreases on these 35 ch. Then you need to knit decreases according to the first scheme to the end of the sleeve.

Sew shoulder seams and sleeves.

Now on the front side we tie the whole bolero as follows (see the third diagram):

First r.*2 tbsp. s / n, skip 1 loop, ch 1 * continue from * to the end.

Second r.*2 tbsp. b/n, pico*. Continue to the end.

Now according to the fourth scheme we tie a button :

First r. In a ring of 3 ch. tie 6 tbsp. b/n.

Second r. The number of loops must be doubled. In each we knit 2 tbsp. b/n.

Third r. We double the loops in every second.

Fourth r. We double the loops in every third loop.

Then we knit by analogy until the diameter of the circle reaches the diameter of the button. Now you need to attach the button to the wrong side of the circle. Knit 1 row without increases, and then knit rows with symmetrical decreases of loops. Pull the thread through the last 6 loops and tighten tightly.

We sew a button on an openwork strip. Arch of 5 v.p. on the opposite shelf will serve as a loop. Bolero is ready.

We knit an openwork bolero

If we talk about the ways of knitting bolero patterns, then one cannot fail to mention short jackets for girls. In combination with long sleeves, the product looks very romantic. Consider how to crochet a similar openwork bolero for a girl of 4-5 years old.

Dimensions of the finished bolero:

Length - 20 cm; width - 26 cm; sleeve length - 23 cm.

Materials for work:

• 1 skein YarnArt yarn IBIZA (60% viscose - 40% acrylic; 100g - 550m);
• hook number 3.

Knitting patterns:

Progress:

We collect the required number of air loops, a multiple of ten.

First, the back is knitted with the main pattern according to scheme 1, having knitted seven centimeters, we cut small armholes for the sleeves, somewhere in a couple of centimeters (the height of the armhole is 13 centimeters). Having knitted another ten centimeters, it is necessary to make a cutout for the neck and knit another three centimeters.

Then we knit the two front shelves. We collect the required number of loops, knit about eight centimeters and begin to reduce a little with each row, for a smooth neckline. We knit the second shelf in a mirror image of the first.

When all the pieces are connected, they should be sewn together. Top seams first, then side seams.

The sleeve is knitted separately and sewn on or crocheted, which allows the product to stretch and keep its perfect shape. First, 12 centimeters of the sleeve are knitted, then it is reduced to the size of the armhole and sewn on. After that, we knit the sleeve with another pattern according to scheme 2. First, we knit from the first to the fifth row, and then repeat from the second to the fifth.

Master class on creating a summer bolero

It would be a great idea to crochet a summer bolero for a girl, because this versatile piece will diversify the wardrobe of a little fashionista. A master class in crocheting a bolero for a girl with diagrams and descriptions will help in this. This bolero is suitable for girls 5-6 years old.

Bolero size:

Materials for work:

• hook No. 1.5;
• yarn - DIVA 100% microfiber acrylic (350 m, 100 g) pink - 200 g, purple- 100 g;
• tape - 1 m.

Knitting pattern

Progress

First we knit the back, then the shelves, sleeves.
Back: knit a chain of 89 air loops and knit 15 p. Further, for the armholes, decrease the loops on both sides in the next five rows according to the scheme (73 loops). Continue knitting another 7 p. (total 27 rows).

Right shelf:

Knit a chain of 13 air loops. Next, knit 15 p., Gradually adding loops in each row on the right side of the loop. Then, on the left side, decrease the loops for the armhole and at the same time on the right side, decrease for the neckline according to the diagram. Having knitted 12 rows, finish knitting (10 loops).

Left shelf:

Knit symmetrically to the right shelf.

Sleeves:

Knit a chain of 49 air loops, knit according to the scheme (for a bolero with long sleeve- 15 rubles, with short sleeve- 11 rows). Next, decrease the loops according to the scheme in six rows. Finish knitting (13 loops).
Tie the sleeves and back according to the pattern with purple threads. Details of the product to wash, sew.

Bolero decoration:

Tie flowers. It turned out 17 flowers that need to be connected together.
Tie right and left shelf, the neck of the back according to the scheme.
Sew a ribbon of flowers to the shelves and neck of the back. The bolero can be decorated as you wish, for example by tying small flowers of a different color.

Video lesson

To make it easier for beginner knitters to understand the features of the process of crocheting a baby bolero, it is worth looking at a few before starting work. detailed videos master classes from professional needlewomen.

Video "crocheted bolero for girls"

In the wardrobe of every fashionista there should be such a spectacular thing as a bolero. This cropped jacket can be sewn in fabric or crocheted and knitted. The bolero may not have sleeves or, conversely, completely cover the arms. There can be a lot of variations. One thing remains unchanged - it does not have a clasp.

It is enough just to crochet a bolero. Enough to choose desired type yarn and a suitable hook. Bolero can be worn at any time of the year. For a summer cropped jacket, it is better to choose cotton or linen yarn. Silk threads are also suitable as a material. In order to knit a warmer bolero, it is better to choose a thread that contains wool.

Crochet bolero: a way for beginners

We offer a simple model of an openwork sleeveless bolero, tied with posts with 1 crochet. The version of this outfit is quite romantic, it goes well with dresses and skirts. Another plus of this model is that it will take only 60 g of yarn. From this amount you get a bolero size 42. It is better to choose thin threads - 200 m in 50 gr.

• Cast on 35 loops on hook 3. 3 of them will go up, over the rest we will knit the 1st row of boleros.
• In the 1st row, insert the hook into 32 loops (4 loops from the hook) and knit a column with 1 crochet. We do the same with the previous loop. Then we collect 2 air loops on the hook, skip 2 loops of the 1st row, in the next 3 air loops we knit 3 columns with 1 crochet. We've got a rapport. Repeat this step until the end of the row (you should get 5 repetitions).
• At the beginning of the next row, we collect 5 air loops. We knit 3 columns, stretching the hook under the arch between 2 columns of the previous row.
• We collect 2 air loops, we knit 3 columns in the next arch. We knit like this, repeating the rapport, until the end of the last loop of the row (4 repetitions). We collect 2 air loops, 1 column in last loop.
• 3 row: we collect 3 loops, we knit 2 columns in the arch. Rapport: 2 air loops, 3 columns in the arch. We knit rapport to the end of the row. You should get 6 repetitions.
• In the 4th row, we repeat knitting in 2 rows, in 5 - in 3 rows. We knit a rectangle 34 by 12, alternating knitting 2 and 3 rows.
• We form a strap: we collect 107 loops. We lower the chain down and connect it to the lower corner with a connecting post. We knit the bottom of the bolero with a half-column to go to another corner. We collect 107 loops and also connect them to the lower corner with a half-column. It turned out a rectangle with 2 straps.
• We tie the straps and the lower part of the bolero, moving from right to left: we collect 5 air loops, we knit 3 columns into the arch, 2 loops, 3 columns into the arch - 2 loops / 3 columns repeat to the end of the row. On the straps, after 3 columns, we collect 2 loops, skip 2 loops and knit 3 columns again. We finish the row with a half-column, stretching the hook into the 1st air loop of the beginning of the row.
• Last row, bolero strapping: we collect 3 air loops, we knit 2 columns into the arch of the previous row; * 3 loops and 3 columns in the same arch. 2 loops and 1 column in the next arch of loops * - repeat the rapport from * to the end of the row.
• Finish the row with a half-stitch in 1 loop of the beginning of the row. The thread is cut, pulled through the last loop and tightened. If you want the straps to be wider, then continue to repeat the last row to the desired width.

Crochet bolero: a model for women

This simple crochet bolero for beginner knitters does not require much experience. In addition, a short jacket can simply be knitted on any figure without a pattern. It is enough to take a few measurements - the height of the bolero and its width. The thing will be modeled from a square. For size 44, it is enough to knit a canvas 51 by 51 cm with any, even the simplest pattern.

Just cast on 15-20 air loops, knit them with any pattern (even a regular single crochet can work). Calculate the required number of loops by measuring the workpiece. We collect the required number of loops and knit a square. Fold the fabric in half. On the sides we measure the armholes. They should be located near the fold of the canvas. Everything below is stitched.

We form the sleeves. To do this, we tie the resulting unsewn armholes in a circle with the main pattern. We knit until the sleeve of each armhole is the desired length. Cut the thread, pull it through the last loop and tighten the knot. Bolero is ready!

Crochet bolero: patterns

Most boleros are knitted according to patterns. Usually they indicate patterns corresponding to different parts of this short jacket. Below is a pattern of the finished product. The resulting bolero should match it. To do this, after knitting, it is washed in warm water by hand, the water is allowed to drain and the wet product is laid out according to the pattern. In order for it to keep its shape and strictly correspond to the size, it can be blocked with pins. In this case, the pattern must be placed on something soft. Some craftswomen do it on an ironing board.

In order for the thing to turn out, you need to learn how to read the diagrams. Usually they have a small arrow or number indicating the beginning of knitting. You can also see horizontal lines in the diagram. They highlight rapport - a pattern that must be repeated the required number of times.

If it is inconvenient for you to knit according to the patterns, then you can make a bolero using the freeform technique. You can build on the fact that the product can be formed from a square. Just start knitting with free patterns on the canvas, from which then form a square, fold in half and sew side seams. For armholes, you can step back on the sides from the fold about 9 cm. This part does not need to be sewn up.

Also, without a pattern, you can knit a bolero using motifs. Motives are small figures in the form of circles, squares and polygons, which are performed separately. They fit very simply and are used mainly for decorative purposes. However, they can also be used to make clothes. It is enough to link the required number of motives and connect them from all sides with other motives. At the same time, for such knitting, it is better to choose yarn of medium thickness so that it holds the pattern.

Bolero crochet: photo

Crochet bolero: video

Bolero is a versatile piece of clothing. It can be worn with dresses of different styles (from bandage to long summer sundresses), jeans, office wear. Of course, for each set you need to select a product that is suitable in style. Crocheted boleros are most suitable for romantic looks. They fit wonderfully into boho style. Bolero can be complemented with a beautiful brooch or flowers, also crocheted.

Bolero is used not only to keep warm. This feminine outfit adds a touch of flair to your look. Short crocheted jackets look especially elegant. They can be performed both according to the scheme and without it. The easiest option is to knit a square with an arbitrary pattern. Then the crocheted bolero is folded in half and stitched along the sides to the beginning of the armholes.

Bolero is a cape, poncho with sleeves. It is worn by women, girls and girls. This detail of women's wardrobe is universal. With its help, you can complement the usual outfit, or you can just throw it over your shoulders on a cool summer evening.

In contact with

Bolero for girls crochet patterns and description

Crocheted openwork blouse will complement and decorate any outfit. It will be relevant on a cool evening, when it is still hot in an ordinary sweater.

You can knit a bolero for a girl yourself, having pleased with a new thing. The main thing is to choose a simple and elegant pattern to make the thing unique.

Depending on the purpose of the product, yarn and model are chosen.. Even if a thing is knitted for winter or autumn, the pattern can be either solid or openwork. Threads are suitable for woolen, half-woolen, angora or.

To make a crochet knitted summer bolero, cotton, linen or silk threads are suitable, as well as threads containing at least 50% polyamide, acrylic or.

Since, here are considered options for knitting a children's bolero, then if the model is with ties or a drawstring, then they must be carefully processed. If there is a fastener or zipper, then it must be of high quality, reliable, and therefore durable. In a children's knitted product, you can make more buttons so that the child does not freeze in cool weather.

If you are not quite a master, but only learning, then before starting, you need to make a pattern of the product with the size of the child.

Schemes for a knitted children's product

Bolero for children, crocheted, is unusual in itself. For him, you can choose openwork with a pattern, with flowers or with curls. For everyday wear, to make the product dense, you can knit it with simple columns or double crochets. And the finished product for a girl can be decorated with appliqué or embroidery. A beautiful lace for tying is also suitable.

Thread selection

Having decided on the pattern, you can choose the threads for the bolero blouse:

1. If the chosen pattern is airy and light, then the yarn should be thin, with the addition of synthetics. It will be better for the product, it will keep its shape well.
2. A thick and loose pattern requires the same dense threads for knitting it. If there is no suitable thread thickness, then the existing ones can be folded in half.
3. Acrylic threads are suitable for an openwork bolero. They look great in work, and the patterns are more embossed.

The thickness of the thread will depend on the thickness of the hook.. Experienced craftsmen advise taking hook No. 4 for work, any pattern associated with it will look more magnificent.

Consider several options for crocheting a baby bolero.

Bolero mesh crochet

To work, you need a hook and thread. The pattern is so simple that even a beginner needlewoman can knit it.

To knit a sample pattern, you will need a diagram.

Description:

1. row: a chain of air loops.
2. row: a chain of 5 air loops is connected with a single crochet to the fifth loop of the chain of the previous row. This mesh is knitted to the end of the row.
3. row: over an arch of five air loops, 3 double crochets are knitted, then 4 air loops - and so on until the end of the row.
4. row: over the air loops of the previous row, 3 columns with a crochet and 4 air loops are knitted. And so on to the end of the row.

Having a pattern, we calculate what the back, shelf and sleeves of the product should be. For tying the neck and sleeves, simple posts are used, it can be double crochet, or it can be without.

A simple bolero pattern

To get such a model, you need to knit a rectangular strip and sew it in certain places.

Progress:

1. A sample is knitted, according to which the density of knitting is determined. Calculations are being made.
2. A fabric is knitted, the width of which should be equal to the width of the sleeve.
3. The length of the canvas should be equal to the sum of the two lengths of the sleeves, plus the width of the girl's back.
4. The finished rectangular canvas should have two seams that correspond to the length of the sleeves.
5. Tie the finished edges of the sleeves, the bottom and the open edge of the bolero.

Bright bolero

Knitting a bolero for a girl is quite simple, the main thing is desire. We prepare a pattern, according to the size of the child. All the details of the bolero will be knitted on it.

Work starts from the bottom of the product. It is necessary to correctly calculate the number of air loops from which the back of the product and two shelves are knitted. With a “fan” pattern (the diagram will be below), you need to tie 15 cm. This is the length of the product from the armhole to its bottom.

We divide the fabric into a back and two shelves longer, and we knit each part separately. We narrow the canvas on the sides, for armholes. We knit the front shelves to a height of 5 cm, and then we make a narrowing for the neck. In height, the shelf should be equal to the back, we sew the resulting shoulders.

The finished bolero is tied with a fan pattern.

simple model bolero crochet pattern

This cape is a circle in which slits are made for the hands. The basis can be any, simple scheme, the pattern of which fits the style of the selected product.

To knit such a product, you will need a hook and threads of different colors. You need to make sure that they do not shed during washing.

The product is knitted in a circle, when its diameter corresponds to the width of the back, then from two opposite sides you need to make passes, in the form of air loops, and then continue knitting with colored threads, according to the chosen pattern.

The size of the gaps from the air loops should correspond to half the circumference of the arm. The diameter of the finished circle is the value from the bottom of the finished product to the neck, which is already formed from.

To connect the bolero in front, you can use ties, a button or a button.

When the circle is connected, you also need to tie the armholes, the pattern for which can be the same, or you can pick up any finishing one.

A detailed description of such a vest can be found on the Internet, there is also a diagram.

The finished knitted product must be washed and dried, spreading out on a soft flat surface. In order for the product to be worn, it is tedious to iron it, choosing for this a gentle mode on the iron.

Conclusion

Thanks to the abundance of patterns, you can create unique models of a bolero that can be dressy and casual.

Popular are openwork patterns which are suitable for both little girls and adult women.

Experiment with the drawing and with the model. The result will surely please you.