You can't take your eyes off this swimsuit! And the point is not only in the dazzling white color of the swimsuit, but also in the fact that it best sets off tanned skin. Decorative details in turquoise yellow indian style give the swimsuit a touch of "ethno". And this swimsuit can be sewn with your own hands in just an hour, and we will tell you about this in detail.

IMPORTANT! The bodice of the swimsuit and swimming trunks are decorated with decorative elements. They must be purchased in advance. On the bodice, the decorative element also acts as a fastener.

Stages of sewing a swimsuit

Taking measurements

Before sewing a swimsuit, you need to build a swimsuit pattern. To do this, take measurements as shown in Fig. 1 and fig. 2

Rice. 1. Taking measurements - before

Rice. 2. Measurements for the bottom

Construction of a swimsuit pattern

Make a measurement on the figure as shown in Figure 1 and Figure 2.

There is a small ripple in the center of the swimsuit cup, so you need to add 2 cm per fold to the measured value.

On the front of the cups there are drawstrings for threading decorative elements or fasteners.

ADVICE! If for some reason you cannot buy decorative elements for a swimsuit, they can be replaced with ordinary ties made from the same fabric as the swimsuit. Simply thread the strings through the drawstring of cups and bottoms and tie in a knot.

Swimming trunks are modeled according to the measurements taken from the figure. When fitting, you can make the necessary adjustments.

Keep in mind that knitted fabrics are very stretchy, therefore, when constructing a pattern for swimsuit bottoms and swimsuit tops, 10-15% of the length must be subtracted from the measured values ​​​​(depending on the elasticity of the knitwear from which you sew a swimsuit.

How to sew a swimsuit

From the main fabric cut out:

• Swimsuit bottoms - 1 piece
• Swimsuit cup - 2 parts
• Bikini back strap - 1 piece
• Straps for ties (if necessary) - 3 pieces cut along the oblique, 30 cm long and 3 cm wide (finished 1 cm).
• Gusset for swimming trunks - 1 piece (can be cut out of cotton jersey)
• Seam allowances - 1 cm.

Rice. 3. Swimsuit pattern

Work description

To process the allowances on the top of the swimming trunks and along the cutouts on the legs with a flat overlay seam, having previously placed a gusset. Tuck the allowances on the finished sides by 0.7 cm, baste along the very edge with a basting stitch by hand. Measure an elastic band 4-5 mm wide to the desired length, wrapping it around the leg at the cutout of the swimming trunks and below the waist. Cut off.

Thread all three elastic bands into the trunks. Install a twin needle for knitwear on the machine. Adjust the thread tension by trying to sew on an unwanted piece of fabric. Stretching the elastic bands worn in the swimming trunks, stitch along the top from the front side with a double needle close to the edge.

ADVICE! If you do not have a twin needle for knitwear, you can sew with a large zigzag (stitch length 3 mm, stitch width 4 mm), also stretching the elastic bands. Process sections under the drawstring on swimming trunks with an overlock. Tuck 1 cm and topstitch with a straight stitch.

Stitch swimsuit cups with back straps. Overlock all sides. Fold over and topstitch with a double needle or zig-zig. Tuck the allowance on the drawstring and sew with a straight line.

Insert decorative ornaments into the drawstrings of swimming trunks. Insert the clasp into the drawstrings of the cups. If necessary, fasten by hand.

Swimsuits are in fashion, the top and bottom of which are made of fabrics of different colors, but in harmony with each other. For example, swimming trunks can be sewn from a plain fabric, and a bodice from a colored one, or vice versa. In this design, even the simplest design will look original and interesting, so that the attention of others will definitely be ensured. The bodice, made of two triangles of fabric, looks beautiful on any figure and is quite easy to sew, so this model will be the most good choice, and it is most convenient to sew swimming trunks, focusing on the style of your favorite panties. So howsew a swimsuit with your own hands?

Fabric choice

The fabric for a swimsuit should be elastic, dense enough so that it does not shine through when wet, dries quickly and does not deteriorate from exposure to chlorine, salt and water. sun rays. The best choice would be supplex material or knitwear chill: they meet all the necessary characteristics, are easy to work with, do not crumble around the edges and do not let arrows, and color palette wide enough for each girl to be able to choose the shade and pattern to her liking and make a swimsuit. It will take 50 cm of fabric with a width of 140-150 cm or 1 meter with a width of 90 cm.

The fabric for a swimsuit should be elastic, dense enough not to show through when wet, dry quickly and not deteriorate from exposure to chlorine, salt and sunlight.

Elastic band and accessories

To make a swimsuit with your own hands, in addition to the fabric, you will need 2 meters of flat linen elastic 0.5 cm wide. It is best if it is the same color as the main material, or close in shade, but if you could not find the right tone, you can use plain white or black. In addition, you will need a skein of thread, always synthetic, so that they do not collapse over time.

You will also need cutter's tools: tape measure, pattern paper, pencil, scissors, sharpened crayon or soap, pins and a sewing machine with a zigzag mode. After all the preparations are completed, you can start cutting and sewing.

When making a swimsuit, you can decorate it with beads, rhinestones, linens. Make original bindings or clasps using rings or ties from the same fabric.

Tailoring of swimming trunks

To sew a swimsuit with your own hands, you should start with swimming trunks - this is the easiest part of the job. As a pattern, use your any knitted pantieswhose shape you like the most. Cut them evenly along the side seams, attach to paper, secure with tailor's pins and carefully circle around the contour. Then remove the pins and align the lines so that they are continuous and smooth. Cut out the finished pattern.

Spread the fabric on a large table or on the floor so that it does not wrinkle or fall anywhere. Attach the pattern to the fabric, taking into account the direction of the main thread: it must go strictly vertically. Carefully, without stretching the material, secure the pattern with pins, and then trace around the contour with sharply sharpened chalk or remnants. Step back from the outline and draw 5 mm seam allowances. Cut out the piece with sharp scissors.

Then once again attach the pattern to the fabric and outline the crotch area around the edges: this will be our gusset. Remove the pattern, trace the top and bottom edges, and then cut out the piece. You don't need to make seam allowances.

Attach the gusset to the inside of the bottoms and sew on the machine around the entire perimeter with a zigzag seam. Then baste and sew the bottoms on the sides with a regular seam. Measure the circumference of the leg holes and the waist line, measure the same length of elastic and cut. Attach a piece of elastic to the trunks and wrap the edge in one layer, carefully bast, and then sew on a typewriter with a zigzag seam. The seam should run in the middle of the elastic.

When making a swimsuit, try to lay the lines very evenly, as tailoring flaws on a swimsuit will be quite noticeable.

That's all, swimming trunks are ready. Now you can proceed to the bodice. Most girls do not dare to sew swimsuits with their own hands - the patterns seem too complicated, and the process is time consuming, but this is not so. The process is simple and does not require special skills.

Tailoring of the bodice

The first thing you need tosew a swimsuit with your own hands - patternaccording to individual measurements:

1. Measure the width of the breast, while the centimeter tape should pass through the center of the nipple. Write down the resulting number.

2. Measure the height of the cups of the bodice. To do this, attach the tip of the measuring tape to the chest and lift it vertically up to the desired height. Write down the number.

3. On paper, set aside a segment equal to the width of the mammary gland. From the center of the segment, draw a vertical line up, equal in length to the height of the cups, and another line down 1.5 cm long. Connect the left, top and right points to make a triangle without a "bottom". Then, with a smooth semicircular line, connect the left, bottom and right points. To make the line come out even, you can use some kind of round object, such as a plate or saucer of a suitable diameter. The bodice pattern is ready, cut it out with scissors and proceed to cutting.

Fold the fabric in half front side inside. Attach the pattern to the fabric, pin it with pins and outline around the perimeter with sharply sharpened chalk or remnants. Draw 0.5 cm seam allowances on the sides and 1.5 cm on the bottom. Remove the pattern and cut out 2 pieces.

Cut out 3 strips of fabric for the straps: two strips 3 cm wide x 45 cm long, one strip 3 cm wide x 120 cm long. Fold each strip in three lengths, pin all over, then machine stitch with a zigzag stitch. strictly along the middle line. Remove the pins.

Attach the edges of the straps of a shorter length to the upper corner of the triangle cups from the wrong side so that the long "tail" goes down and the short one goes up, secure with pins and sew on a typewriter using a regular seam. Remove pins. Turn the side edges of the cups inwards by a 5 mm layer, pin or baste, and then sew on a typewriter with a zigzag seam.

Fold the lower semicircular edge in half, also pin it with pins or baste, and then sew with a zigzag seam. In this case, you should sew from the wrong side, and place the line as close as possible to the upper edge of the collar. The result should be a drawstring into which you need to thread a long strap. Repeat the same with the second part of the cup.

The swimsuit is ready, you can admire the result of your labors! Now you know for sure.

In this regard, for sure you will be interested to know what should be in a woman's wardrobe today. We also recommend reading an article about fashion accessories, without which no woman can do, either in winter or in summer.

Summer is the time for holidays, which means that very soon it will be possible to enjoy the warm sea, a pleasant stay and cheerful company. And one more bathing suit certainly will not be superfluous!

Sew this spectacular swimsuit with your own hands and be sure that all male attention will be riveted on you!

We sew a swimsuit with our own hands

This swimsuit can be sewn from. Our model uses knitted fabric 2 colors to match color scheme. The bodice of the swimsuit is made of jersey with sequins, the bottom is smooth.

To build a swimsuit pattern, you need to take a few measurements.

We take measurements for sewing a swimsuit

Rice. 1. How to take measurements for a swimsuit

Swimwear measurements should be taken on underwear. Measurements should be taken with the measuring tape pressed tightly against the body.

IMPORTANT! Knitted bielastic fabric stretches very well. That's why measurements taken on the hips should be reduced by 15%. Further adjustments are made during fitting.

IMPORTANT! Pay attention to the model of swimming trunks. Ties are provided on the sides, so take measurements on the hips in front and behind, not reaching about 5 cm to the side on each side.

Construction of a swimsuit pattern

Rice. 2. Swimsuit pattern

Opening the swimsuit

From bi-elastic jersey cut out:

Swimsuit cup - 2 parts

Ties for the bodice: 2 strips of fabric 3 cm wide and 50 cm long (top ties), 1 strip 3 cm wide and 100 cm long (bottom tie).

For swimming trunks - 4 strips 3 cm wide and 20 cm long.

From the lining plain knitwear, cut out:

Cup swimsuit - 2 parts

Front half of swimming trunks - 1 piece

The back half of the swimming trunks - 1 piece

Seam allowances - 0.5 cm.

How to sew a swimsuit with your own hands: job description

How to sew a swimsuit bodice

Fold the details of the ties along the long sides, stitch with an overlay or knit stitch (zig-zag seam) and turn out. You should get straps about 1 cm wide.

Prick the upper straps of the bodice on cups from the main fabric, aligning along the upper cuts, put the details of the bodice from the lining fabric on top. Sew along all sides except the bottom. Turn out the cups. Process the lower sections taken together with an overlock. Turn the bottom over and sew with machine stitch. Insert a long tie into the resulting drawstring. Tie a knot at the ends of the ties.

How to sew swimsuit bottoms

Pin the side ties with details from the main fabric. Overlay details from the lining fabric (face to face). Sew along all sides except the bottom seam. Unscrew both pieces.

Fold the front and back pieces along the bottom seam, matching the allowances. Sew, the remaining open area is carefully sewn up by hand. Make knots at the ends of the ties. Now you know how to sew a swimsuit with your own hands - your swimsuit is ready! Happy Holidays!

Getting ready for the summer season or going to the pool? Can't buy the right beachwear option or want to sew an exclusive item? It's not very difficult. A swimsuit pattern can be used ready-made or built independently according to specific sizes. Choose suitable way and model. Pamper yourself with exclusive things.

Exclusive Design

Patterning a swimsuit that you like can be too complicated, so first you should decide how much time you are willing to spend on making a beach accessory, and be sure to take into account your experience. Models of swimsuits, both open and closed, are very diverse. If you are going to sew it yourself, then you are striving for exclusivity. In the absence of a lot of sewing experience, it is worth taking simple patterns, and you can surprise with an unusual decor or even material.

Products made of jeans look very original when bikinis are similar in design to cropped trousers. There are stylized pockets on the bodice or, again, on the lower part. A non-standard look will be given to the product by various combinations of bows, ribbons, ribbons from the same material as the base. As a first experiment, take the simplest pattern, but work on the decor.

Tools and materials for work

To sew a beautiful product, you will need the following:

• fabric (preferably elastic, but you can use regular fabric);
• gum (latex or not);
• cups, bones (optional and skills);
• pins;
• tailor's chalk;
• scissors;
• needle;
• threads;
• sewing machine (preferably with an overspoon);
• fasteners;
• additional decor (depending on your preferences).

In fact, to create the simplest product, you may not need any patterns, fasteners, or additional decor details, but only what you need when sewing any thing, plus elastic bands to fix the shape of the bottoms.

Sewing sequence

To make a swimsuit, work as follows:

1. Cut out pattern pieces from paper.
2. Arrange the blanks on the fabric in an optimal way.
3. Pin the patterns with pins so that they do not move as you work.
4. Circle the contours with tailor's chalk or remnants. Don't forget the seam allowances.
5. Cut out all the elements from the material.
6. Stitch the main seams of the product.
7. Use an overlock to finish the edges.
8. Attach rubber bands. Be sure to stretch them to the desired size during the sewing process, so that a uniform assembly is obtained later.
9. Sew all the elements together.
10. Make and attach decor.

When making any swimsuit, the work will go about the same, although the differences will depend on the specific model.

How to sew a swimsuit with your own hands: patterns

The process of making a beach outfit is largely determined by the complexity of the chosen model. If you are going to make a bodice and swimming trunks that are not in the form of triangles on strings, then you will have to start with making paper template. There are two possibilities here:

1. Find ready-made version, for example in a magazine.
2. Build everything yourself.

The first way of working is good because you don’t have to take measurements, scrupulously build a drawing. Ready patterns made to a certain size. True, average proportions are used. If you have a non-standard figure, you will have to work hard with the construction.

You can make a drawing manually or using a computer program. But if you are not so confident a PC user, it is better to use a ruler, pencil and graph paper.

If you understand how to sew a swimsuit with your own hands, you may not need patterns at all. There are models in the manufacture of which it is easier to do without paper blanks.

Choosing a ready-made template of a closed version

The first is the simplest pattern of a closed swimsuit. To perform such a model, it is enough to make two parts, sew them on the sides and below. In the places indicated by the dotted line, an elastic band is sewn in.

The following model can be used exclusively as a swimsuit or as a base for a bathing dress. Add a frill at the bottom in the form of a skirt and decor on top. To support the chest, it is worth sewing cups and bones.

The first two options are best made from elastic fabric, and the third has tucks that will create a shape.

Based on the last template, you can build a pattern yourself. Here all lines and guides are shown in detail.

Separate swimsuit pattern

So, you have decided to get an exclusive model. What to sew a swimsuit? The closed pattern does not suit you, because you like to sunbathe, and you also want to show the charms of the figure on the beach. Use the following simple option.

Below is more complex pattern separate swimsuit. In addition to the details of the base, there are also elements for sewing decor in the form of bows for both swimming trunks and the bodice.

If you like the template presented, print it, focusing on your proportions, and use it.

How to build a pattern yourself

If you can’t find a pattern for yourself, make a paper blank yourself. This is not as difficult as it might seem at first glance. If you have no experience in building at all, but really want to sew a swimsuit with your own hands, the pattern is easily done according to the item that is available and fits well on you. Take panties from the underwear set suitable form, spread them evenly on the surface of a sheet of paper and circle the outline. First make one part, then turn the thing over and circle the other side.

It is better to use a product without assemblies as a sample. If you want to get an exact copy of the frill bottoms, you will have to slightly adjust the outline. As for a simple bodice pattern, you can make it in the form of a single strip with sewn-on straps, cups in the form of triangles on the belt, etc. Simplify possible variant to the level of their experience or the amount of time available for work.

As you can see, it is quite possible to update your beach wardrobe with your own hands and without going to the store. The swimsuit pattern is not very difficult to build, although it is better to use a ready-made template. Choose models, create fashionable things yourself.

Agata Vasnetsova

Style is a way of saying who you are without using words.

Content

Wanting to look irresistible on the beach, girls spend a lot of time looking for the right swimsuit in stores. Another option is to sew the item yourself. Making a swimsuit with your own hands will allow you not only to create an exclusive thing. it creative process, allowing you to show imagination, develop useful skills.

How to choose fabric for a swimsuit

A set for the beach should be durable, comfortable, beautiful. The peculiarity of this clothing is that when used, it gets wet. What fabric are swimwear made from? It is worth choosing an elastic material that does not lose shape when wet. The stability of the pattern in relation to water, the sun, salt, chlorine is desirable. The canvas should be pleasant to the touch, not irritate the skin. Understand the name of the fabric for swimwear. Beach sets are made from:

• polyester;
• lycra;
• taktel;
• polyamide;
• nylon;
• microfiber;
• cotton.

Step-by-step instructions for sewing swimwear with your own hands

Self-made kit for water procedures and sunbathing has its own characteristics. The seams on the product must be elastic. You need to select the overlock or zigzag stitch mode on an ordinary sewing machine. When sewing, stretch the fabric before and after the foot. The threads used for sewing must be elastic and waterproof. A snug fit of the product to the body is possible when processing the edges with a waterproof elastic band intended for the manufacture of swimwear.

How to make a bandeau swimsuit with your own hands

The strapless model is suitable for getting a wonderful tan, because it does not leave marks on the shoulders. Before sewing a swimsuit, prepare:

• elastic material (will fit unnecessary t-shirt);
• matching color threads;
• soft lining fabric;
• latex elastic band 1 cm wide;
• bra cups;
• crayon (a bar of soap will do);
• scissors;
• fastener;
• pins;
• sequins, beads or glass beads to decorate the product.

The lower part of the swimsuit is made like this:

1. Take simple panties that fit well. Spread them out on the sides.
2. Transfer the pattern to the wrong side of the canvas.
3. Mark the gusset on the lining material.
4. Cut, stitch the detail.
5. Finish the cutouts for the legs with an elastic band. Attach it to the edge, sew in a zigzag. Then fold over the edge, sew an elastic stitch. The seam should be neat on the front side.
6. Sew a belt, thread an elastic band.

To make the top of the model, do the following:

1. Lay out the material wrong side up.
2. Draw a pattern in the form of a rectangle with a width of 30 cm and a length equal to the half-girth of the chest.
3. Cut out the detail.
4. Fold the rectangle in half lengthwise, sew.
5. Insert the cups inside the strip.
6. Gather the fabric in the center, sew. You can insert a ring.
7. Pull the elastic at the bottom.
8. Cut off strips of material, sew them on the sides. If back ties are planned, the details should be longer.
9. Install the clasp.
10. Decorate your swimsuit.

How to sew a swimsuit with underwired cups

For a voluminous bust, you need to choose a set that securely fixes the shape of the breast. How to make a beautiful swimsuit? Prepare for this:

• knitwear stretching in different directions;
• soft lining fabric;
• cups for your size (push-up, balconette);
• linen fastener, accessories;
• bones suitable for the selected cups;
• elastic band without braid 5-10 mm wide;
• tunnel tape;
• thin threads;
• knitting needles;
• decoration material.

How to sew the bottom part is described above. The top is done like this:

1. Pull the cellophane over the cup, draw, cut out the detail.
2. Take off the rest of the elements from any bra.
3. Open the cups with allowances of 1-1.3 cm at the top and 8 mm at the bottom.
4. Sew the top of the pieces by folding the inside of the cup and the face of the fabric.
5. Drape the excess.
6. Sew cups and bottom.
7. Insert side bones.
8. Stitch the elastic at the bottom.
9. Sew the ribbon to the bottom of the cups.
10. Treat the top with an elastic band.
11. Sew on the clasp.
12. Insert the bones into the cups.
13. Sew on the straps.
14. Decorate the item.

How to sew leotards for rhythmic gymnastics

The appearance of the athlete affects the perception of the judges. A gymnastic suit for a performance should be harmonious, bright, beautiful, and comfortable. To make a beautiful sports model, you first need to create its drawing. Marked on paper important details future things, tucks, the location of jewelry. How to sew a gymnastic suit? Prepare:

• elastic fabric;
• stretch mesh;
• fabric glue;
• decorations.

How to sew a swimsuit? Your actions:

1. Take the grid, draw on it the patterns of all the details - the front, the back, the two lower parts. In this case, it is necessary to take into account the circumference of the waist and chest, the armhole, the size under the bust, the height laid from the middle of the groin to the waist, from the waist to the neck.
2. Cut out the pieces from the mesh, making allowances for the seams.
3. Cut out pieces of fabric.
4. Fold the parts from the inner mesh and base material. Baste, sew the elements on a typewriter.
5. Glue the rhinestones with special glue.
6. Add the rest of the decorations after the product has dried.

How to sew a do-it-yourself swimsuit for a girl 2-5 years old

Modern children with early age flaunt fashionably dressed on the beach. It is important for a girl to choose a comfortable, reliable, beautiful bathing suit. To sew a cute thing, you will need:

• lycra in two colors that are in harmony with each other;
• an elastic band 0.3-0.5 cm wide (an ordinary elastic band for panties is suitable);
• threads of suitable colors.

How to sew a one-piece swimsuit with your own hands? The cut is done like this:

1. Put on the child a T-shirt that fits tightly to the body, panties of a good shape.
2. Mark the line on the top where the floats begin.
3. Fold your shirt in half. Attach it to the fabric folded in half.
4. Circle the thing with a pencil to the panty line, making an allowance of 0.5 cm. Make two such patterns. Deepen the neck and armhole on one of them.
5. Cut out the side panels from fabric of a different color.
6. Attach the panties, circle them with a pencil.
7. Cut out the gusset.
8. Cut out two skirt pieces.

To assemble the swimsuit, do the following:

1. Sew the details of the bodice.
2. Align the armhole.
3. Sew the gusset to the panties on three sides.
4. grind side seams swimming trunks.
5. Align, sew the top of the panties, the skirt, the bottom of the bodice.
6. Pin the elastic to the holes for the arms and legs, stretching the elastic.
7. Sew around the edge.
8. Wrap the elastic inward.
9. Pave finishing stitch zigzag.
10. Finish the bottom of the skirt.
11. Decorate the finished swimsuit.

How to decorate a swimsuit with your own hands

There are many ways to decorate:

• bows - look feminine, attractive;
• decorating with roses - decorates a thing, adds volume;
• lace decoration - turns a swimsuit into an exquisite piece of clothing;
• hard wavy tape - makes the thing more attractive;
• spectacular pattern of sequins - gives the swimsuit a unique shine;
• ruffles - transform old thing, visually increase the chest;
• beading - looks solemn, unique;
• decorative metal spikes - give the product boldness, style, catchiness.