Pattern of a school uniform for a girl. Sew a school sundress for a girl with your own hands - patterns A simple one-piece dress is the basis of all dresses

The pattern of a cut-off dress-sundress along the waist line is suitable for girls with a height of 122-128cm. The skirt is pleated. Zipper in the middle back seam. Using this pattern, you can sew not only a strict school sundress, but also a summer dress for relaxing, choosing bright fabrics.

The pattern is calculated chest girth 60-64cm - this is the age of 7-8 years. Age guidelines are rather “slippery”, since children at this age are of different heights and different fatness, so before cutting, take the main measurements: chest and waist, length to the waist and the entire product, and compare with the parameters of the pattern. Correct if necessary

A table of sizes for children's clothing, as well as the ratio of the age, height, chest circumference and weight of the child can be

Choose fabrics depending on the purpose of the sundress dress: preferably natural - these can be plain fabrics or with a small delicate pattern, in a cage, in peas, etc.

Pattern preparation

Print the pattern sheets on the printer and connect them in accordance with the diagram. The scheme is the order in which the pattern sheets are connected. It is printed on the first page.

Be sure to check the scale. On a printed sheet with a depicted square of 10x10 cm, the sides of 10 cm should correspond to exactly 10 centimeters. To do this, in the printer settings, set the print scale of the document to 100% (without scaling).

After gluing the sheets (it is convenient to do this with a glue stick or narrow tape), carefully cut out the details of the pattern.

The pattern is given without seam allowances.

Details of the cut of the sundress dress

Backrest 2 parts
Before the bodice 1 piece with a fold
Side of the front of the bodice 2 parts
The front panel of the skirt 1 piece with a fold
The back panel of the skirt 2 parts
Skirt details are cut according to one pattern

When cutting, do not forget to allow for seam allowances!

Tailoring of a sundress.

Neck and armhole finishing summer version sundress dress provides for edging with an oblique trim from the main material, or you can use the finished one. The bodice of a sundress dress for the cool season is recommended to be lined (cut according to the main details). The processing of a sundress dress depends on the material and, if synthetic fibers have an advantage in its composition, then the dress should be completely sewn on the lining and the bodice and lower part.

For those who want to build a pattern for a specific figure of a child according to measured standards, we have a detailed

Sundress - comfortable clothing in summer period. Especially if the clothes are made of light fabrics, then the sundress will become indispensable on hot days! If you sew a sundress from a dense material, then you can wear it both in autumn and in spring. Under it, you can wear a turtleneck or a T-shirt, depending on the weather. A sundress made of dense fabric will warm the girl in winter and will not hinder the child's movements.

Consider 5 options for sundresses for girls.

Summer dress with straps. These clothes are perfect for a 2-5 year old baby. A small amount of fabric is required, and it is better to purchase satin, linen or cotton. Picking a color is not a problem. Before you start building a pattern, you need to calculate the length of the cut. Measure the future length of the sundress from the top of the neck to the bottom of the skirt itself, and then add 15 centimeters for allowances and facing. If everything is correct, you will get the desired length, which will be needed for tailoring. You can sew a sundress with a frill on the bottom, or without it, this is already a matter of taste. In order to correctly draw up a pattern for a future product, you will need to use the diagram below as a sample.

Measure the length of the sundress and the width chest.
Sew clothes with a frill, then shorten the length of the pattern to the expected width of the frill.
Divide the width of the chest into 4 segments, and then add 2-3 centimeters. We get the desired width of the shelf pattern along the line of the chest.
Set aside 8-10 centimeters to chest height. The front and back shelves are almost identical, there is a difference only in the circumference of the armhole. On the back, it is flatter than on the front.
Draw a pattern on paper, cut it out and start cutting. Don't forget the seam allowances!

The end result should look like this:

Back 1 pattern;
Front part 1 pattern;
Straps 2 patterns;
Shuttlecock 1-2 patterns;
Turning the upper part 1 pattern;
Turning the front shelf (top) 1 pattern.

So to sew beautiful sundress, you need to do the following:

Fold the strap inward and stitch.
Turn the straps inside out, iron. You can use ribbon or elastic to create straps.
Fold the back with the front, the right side should be inside, and sew side seams.
Baste the straps to the shelves, adjust the length.
Place the facing along the upper edge of the front shelf and back, the front side should be inside. Secure the straps and pieces with a seam.
Sew the side seams of the facing.
Iron and stitch the edge of the facing turned inside out.
Lay a line 2-3 centimeters from the edge, which will secure the facing along the bottom.
Finish the bottom with a seam.

If you are sewing a sundress with flounces, then sew at the flounces side cuts, sew the bottom edge with a seam, and attach the top edge, and sew to the bottom edge of the product.

The dress is ready! Let your daughter wear it with pleasure! Additionally, you can decorate it with various accessories and appliqué.

2) Summer sundress without using a pattern. The model is easier to sew than the previous one. You can do it even if you've never picked up a needle before. It will take approximately 20 minutes to work, and your beloved daughter will have new clothes. Sundress can be sewn from different fabric, plain fabric with a bright print is also suitable.

For tailoring would need:

A small piece of fabric that you can wrap your daughter around.
1.5 - 2 meters of webbing tape.

The sundress itself consists of 2 parts that are exactly the same: front and back. Clothing should be loose and not interfere with the movement of the child, so the width of each part should be made 10-15 centimeters more than half the circumference of your baby's hips. The sundress will turn out flared.

Getting Started to the scheme of cutting a sundress:

Fold the fabric right side inward, mark the length and width of the future sundress, and draw armholes.
Cut out 2 parts of the back and front, and do not forget about seam allowances. No tape on the straps? Then make straps out of fabric.
Turn the edges of the armhole and sew.
Sew up the side seams.
Tuck the bottom of the sundress, stitch it. You can, if desired, add a shuttlecock, braid, and so on.
Tuck the neck and make a drawstring.
Pass the ribbon through the drawstring and tie a bow.

For older girls, you can sew the same sarafan, but you need to cut it diagonally.

3) Sundress for girls with "wings". The product has lace wings instead of straps.

For sewing you will need:

Cotton fabric.
Elastic.
Lace "Sewing" - 50 centimeters.

To sew a sarafan you will need:

Measure the length of the sarafan, and make 2 patterns for the front and back. Do not forget about allowances for seams, processing of the lower part and drawstrings.
Fold the front side of the shelves inward, and grind the side seams.
Sew lace to the front and back. Check out the diagram.
Finish the edges of the armhole with a hem seam and topstitch.
Bend the neckline so that you can insert the elastic.
Process the bottom of the sundress, you can sew on ruffles or flounces for beauty.

Outfit is ready! You got summer lace dress for my beloved daughter. You can decorate the product with ribbon bows.

4) Flared summer sundress. Just sew children's sundress with cut-off skirt.

You will need these materials:

Summer light fabric, about 60-70 centimeters. It all depends on the age of the girl and the length of the product.
Threads, braid.

In order to sew a sundress you will need:

Take all measurements from the child and mark the pattern. The scheme is very simple, so you can work directly on the fabric. You can use the diagram below.
Finish the edges of all parts.
Sew the back seam on the skirt and front.
Fold the shelf and skirt with the front parts inward, and sew along the waist line. Pick up the skirt a little in the process.
Turn the bottom edge of the skirt over and sew a seam.
Finish the top edge with a hem seam.
Choose a place for the straps, and sew them.
If you wish, YOU can decorate the product with pockets, openwork appliqué or a belt.

The sundress is ready, and your daughter can wear a new thing with pleasure.

5) Two-sided sundress for girls. At first, it may seem that sewing a double-sided sundress is much more difficult than a regular one, but this is a delusion. Simplicity and speed are the main advantages of the product!

For sewing, you will need the following materials:

Threads that match the fabric.
Two fabrics of 80 centimeters each. One side can be sewn from thin jeans, and the other from cotton.

In order to sew a sundress, you need to do the following:

Transfer the pattern to paper and cut out the details.
Cut out the front and back sides of the sundress from fabrics A and B. You will get 4 parts. Open pockets.
Process the sections together with the hem of the sundress. Use an overlock or zigzag stitch.
Sew the pockets onto fabric A.
From fabric A, fold the front and back pieces right sides inward. Stitch the seams.
From fabric B, fold the front and back parts with the front parts inward. Stitch the seams.
Fold the parts of the sundress with the front parts inward so that they fit together, and sew the seams along the armhole, straps and neck.
Notch the neck allowances in several places.
Turn the double sundress inside out and iron all edges.
Topstitch along the straps, armholes and neckline.
Hem the hem of the sundress. You can decorate the product with appliqués, ribbons or a belt, it is up to you.

A few decades ago, absolutely all schoolchildren were required to wear the established uniform, which greatly facilitated the life of parents. Buying a dress or at that time was not difficult. All stores had a special section where you could pick up a uniform of absolutely any size, both for boys and girls.

Today, there is no generally accepted style. There was only an agreement on the combination of colors. Light top and dark bottom are classic. And it is this combination that the administration of any school asks parents to adhere to. In addition to the standard combination of a blouse with a skirt or trousers, girls are allowed to wear sundresses over a light blouse. But today it can be quite difficult to find a thing of the right size, especially when it comes to clothes for first graders. Often, babies entering the school path simply do not correspond to the generally accepted size range of the form produced today. And even the smallest models are great.

Therefore, it will not be superfluous to learn how to sew School Patterns this article of clothing, presented in the article, will help craftswomen understand the principle of creating a pattern for the base and modeling various styles.

Perhaps, work on a new outfit for a little schoolgirl should begin with determining the length of the cut of the material and measurements.

Calculation and taking measurements

For pattern and fabric calculation, you should measure the height of the child, chest, waist, hips, back width, height from shoulder to chest, as well as the length from shoulder to waist and length finished product. For any model, whether it's a straight silhouette or a variant with a canvas width of 150 cm, you will need a cut equal to the length of the finished product + 10 cm for the design of the seams and the hem of the bottom. If the width of the material is 110 or 80 cm, its consumption will increase by about 20 cm.

What material should not be taken?

The fabric for a school sundress should be selected based on the following requirements for the fabric:

What is better to sew a sundress from?

The ideal option for both price and quality will be the so-called school fabric, as well as katon, gabardine. But you can use other costume fabrics. From knitted fabrics diving and jersey can be used. In any case, the patterns of school sundresses discussed in this article are suitable for making a product from any canvas, the only difference will be in the fastener.

In addition to fabric, you will need sewing equipment, matching threads, a 50 cm long zipper or buttons. But, as practice shows, the child will be more comfortable with a zipper.

Building a template

The main pattern of a school sundress for a girl of 7 years old, on the basis of which absolutely all styles are modeled, is built in accordance with the measurements taken from the figure. To develop a drawing, you will need to draw a rectangle on paper or on a construction film. One side of it is half the circumference of the chest, the other is the length of the product. Further construction can be divided into several stages:

Perhaps these are all the tricks of building the main pattern of school sundresses. All of its changes relate to design and modeling. And this topic is worth talking about separately, because by changing the number of cut elements and their shape, you can achieve amazing results.

Modeling

If you change the base a little, then new patterns of school sundresses will come out. For example, in the drawing, you can indicate embossed seams from the shoulder to the bottom, the sections of which flare to the hem. The six-piece product will look like a bell and is perfect for a small thin girl.

You can also make the top cut-off, and arrange the skirt from a strip of fabric gathered with bow or ordinary folds. The place where both parts are combined can be decorated satin ribbon and bow. In this case, it is best to underestimate the waist by about 7 cm.

Patterns of school sundresses for girls can be improved. For example, it is not difficult to fit it on the back and make a real lady's sheath dress in this way for the baby.

Also interesting options there will be models with a tulip skirt and a peplum along the waistline.

Armhole and neck options

Sewing a school sundress, the pattern of which is built so easily, is not at all difficult. All the most difficult thing that can lie in wait during assembly is the armhole. They can be made from the main fabric or a selection of lining fabric, duplicating the main fabric of the product to the waist line.

In view of the fact that the patterns of school sundresses for girls are built without complex calculations and drawings, and the processing of parts is not so complicated as it might seem at the beginning of work, you should try your hand and make an item school uniform on one's own.

The cold has come and every little girl needs a beautiful, comfortable and warm sundress. Today we will sew a sundress on the straps. It can be worn over a sweater or turtleneck. By the way, there is still MK for tailoring and warm.

To sew a warm sarafan for a girl, we first need a pattern. Print all sheets, glue along the lines with scissors. Choose the size you want (marks with sizes from 62 to 98 correspond approximately to the height of the child)

Pattern of a warm sundress from 62 to 98 sizes:

You will also need:

fleece double-thread footer (warm jersey);
interlock (cotton jersey) to match for lining;
threads in tone;
narrow silicone band;
2 buttons to match;
scissors, measuring tape;

Master class on sewing a children's warm sundress for a girl:

In order for the sarafan to fit on the existing piece of fabric, we will make a yoke. If your fabric allows, the front and back pieces can be cut as is. For the coquette, we retreat two centimeters from the edge of the armhole of each part, draw a line, cut it off. You will get two halves for the details of the front and back. We fold the main fabric (footer) with the right sides inward, pin the pattern of the top of the front to the fold. Cut out the detail with allowances.

We will also cut out the upper part of the back.

We do not make an allowance only along the fold, we cut out the lower part of the front.

In the same way, we cut out the last large detail - the lower part of the back.

From the fabric folded in half, we cut out a pocket with small allowances.

Now you need to duplicate the upper details of the sundress from a plain interlock. We fold it face to face, to the wrong side we pin the already cut out details from the footer.

We will also attach the back piece. Can be circled by paper pattern, but on the head of the part, the allowances match perfectly.

So, we got two parts for the front and back from two types of fabric.

We fold plain parts with the front sides, we chop off the sides with pins.

Sew with a straight knit stitch.

In the same way, we sew the sides of the parts from the footer.

We fold the sewn parts with the right sides to each other.

According to the previously postponed allowances, we sweep away the details.

Sew along the basting with a knitted straight stitch.

We turn the sewn parts inside out and iron them.

Sew close to the edge with a straight line.

We apply a pattern to the cut-out part of the front, mark the places for pockets with pins.

We will make basting seams in place of future pockets.

Now fold the front and back pieces face to face and sweep the side seams.

We sew according to the basting, we process the edge with a zigzag or any similar seam.

We turn the lower sections of the top of the sundress inward and sweep it.

Let's put the bottom part of the sundress between the two layers of the top fabric. We fasten the bottom with the top with pins.

The lower (monotone) layer of fabric is swept to the other two details.

Sew all three layers of fabric with a straight line. Thus, we will make a coquette on a sundress.

Cut out two rectangles from the plain fabric. The long side is the width of the pocket, the short side is 4 cm.

We apply the rectangles with the right side to the face of the pocket, sew with a straight line.

We fold inward and sew with a straight line.

Bend along the edge of the pocket and bast the allowance.

On the lines outlined earlier, we fasten the pockets to the sundress with the help of pins.

We sew pockets with a wide knitted line.

On the yoke we mark the width of the loop according to the size of the button.

We cut the loops at the marked points.

We sew buttonholes on a typewriter or manually.

Sew buttons to the straps.

So that the lower cut of the sundress is not too wavy, we sew the silicone tape with a wide knitted seam.

Thus, we overcast the entire lower edge of the sundress.

Then fold the edge inward and sew with a straight line.

Work on the sundress is over. It can be sewn from any warm fabrics, decorated with appliqués or embroidery. Such a sarafan will allow a little girl to dress beautifully even in the cold winter months.

Childhood is an amazing and unique time. It is at this time that children look especially cute and touching, wearing outfits sewn by caring mother's hands. Sewing a sundress for a girl at the age of 1 year is not difficult at all.

You will need a small piece of fabric (about 60 cm long and 150 cm wide) or even an old mother's dress, sewing machine and 1 free evening. It is not at all necessary to build a sundress pattern - all the details are cut out immediately on the fabric. The dimensions of all details of the dress cut are given for a girl with a chest circumference of 47 cm and a hip circumference of 48 cm. Seam allowances are already included in the indicated sizes.

How to cut a sundress without a pattern for a girl of 1 year

From the pre-ironed fabric, cut out the following details:

1. Skirt panel size 22*140 cm, 1 piece;

2. A frill of a sundress with a size of 6.5 * 210 cm, 1 piece;

3.Sundress straps size 34*8 cm, 2nd detail;

4. Ruffle for straps size 54*6 cm, 2 parts;

5.Sashafan belt size 58*8 cm, 1 piece.

In addition, from the fabric-based adhesive pad, cut out the details of the belt and straps.

After all the details are cut out, you can start assembling the sundress.

The sequence of sewing a sundress

First of all, you need to hem the bottom of the frill. The width of the seam should be 5-7 mm.

Then it, previously laid in small folds, should be sewn to the cloth. The stitching seam allowance must be overcast, ironed in the direction of the panel. By front side it is necessary to give a finishing machine line with a width of 2 mm.

After that, the cross sections of the panel must be overcast and then stitched together with a 1 cm seam, leaving a 7 cm long cut at the top. The seam allowances should be ironed out.

The belt should be glued, folded in half along the length and ironed, and then overcast in one long section.

Next, with a raw cut, the belt must be sewn to the skirt panel previously laid with tucks with a seam of 1 cm. The end ends of the belt must be turned. On the right, the end of the finished belt should be a kind of continuation of the cut of the skirt (a loop will be sewn here), and on the left it will protrude 3 cm (a button will be sewn on here).

The ends of the belt must be turned out, straightened, the belt must be unscrewed with a swept edge to the wrong side of the product, fixed, if necessary, in this position with a hand stitch or pins.

On the front side of the belt, a line 2 mm wide should be given. The auxiliary hand stitch or pins must be removed, the belt should be ironed.

After that, it is necessary to prepare a ruffle for the straps, namely, overcast its outer cut, and then iron it to the wrong side by 7 mm. Along the edge, it is necessary to lay a machine line 2-3 mm wide to secure the allowance.

Details of the straps must be duplicated and ironed in half along the length.

With the help of pins or a manual auxiliary stitch, you need to attach the ruffle laid in small folds to the longitudinal section of the straps. It is important that the ends of the frill do not reach the ends of the straps by the width of the belt (3 cm).