Every winter you want to keep warm, but most often many neglect warm mittens. This is especially true for men. Therefore, in order for a beloved man to keep his hands warm, you can try to knit excellent warm mittens for him. Of course, mostly men prefer to wear gloves - it is more convenient and easier to use. But if a woman takes care and knits warm mittens with her own hands, then a man will certainly appreciate such a gesture and be happy. Schemes of men's mittens with knitting needles are not complicated, the main thing is to follow step by step description, this applies to beginners.

Exists a large number of different patterns to decorate men's mittens. To do this, you just need to be patient and find the time to show your care and please the man. Over time, it will turn out better, and then it will even be possible to knit such mittens for a gift. Usually men do not need to knit unusual ornaments, simple gray mittens will not work either. You can knit different patterns to match the main color.

Product with braids

Knitting mittens with knitting needles is not something difficult. Even for those who are just starting to get acquainted with the technique of knitting, it will not be difficult to knit such a product. This masterclass presents detailed description how to knit men's mittens with a pattern such as a braid. Unlike women's, mittens will be plain and look very masculine. Some people think that different patterns are more feminine, but men still need to look presentable too.

What we need for knitting:

• four knitting needles and one more, you can take circular ones;
• yarn of one tone, it is better to take a wool mixture or acrylic;
• scissors;
• hook.

We collect forty loops on the knitting needles, then distribute them into 4 knitting needles so that each gets 10. We start knitting from the cuff, which is knitted using a regular elastic band - one front, the second wrong. The height of the cuff should be 8 cm. We knit further in a circle. But on the first two knitting needles we will perform a pattern - a braid, and on the third and fourth knitting needles we knit with ordinary facial loops. Before crossing, knit like this - we knit 7 purl and then 3 facial ones. And then we do 3 facial, followed by 7 purl. So we knit 5 rows.

Note! Remember that on the other two we knit with facial buttonholes. This is very important point at work.

Now let's do the crossover. To do this, we knit seven wrong ones on the first knitting needle, and we take three facial ones to the side, we can string them on an additional knitting needle. On the first needle, now knit 3 from the second needle. But on the second knitting needle we knit those three that were taken aside, then we knit seven purl ones. So knit six times. Do not forget that on the third and fourth knitting needles we knit with ordinary knitting needles. Then we make the second crossing, but after that we should mark the place of the thumb with a thread of a different color.

Then we knit in the same way until we reach the tip of the little finger. Then we begin to make a decrease in buttonholes, for this, at the beginning of the first and third knitting needles, we knit two buttonholes together, but also at the end of a row of two other knitting needles - the second and fourth. So we knit until there is one left on the knitting needles, then we cut the thread and stretch it through each buttonhole and tighten it. With the help of a hook we hide the thread inside the mittens.

Now let's start knitting a finger. To do this, we pull out the thread and distribute the loops between 4 knitting needles, but we will also add two buttonholes so that holes do not form. Knit in stockinette stitch in the round until knitting reaches the middle. nail plate thumb. Then we make a decrease, as in the most basic part, until 4 buttonholes remain. We remove them from the knitting needle and with the help of a hook we stretch the thread, through them and pull the mittens inside. And now our mitten is ready!

On two spokes

Another option for knitting mittens is with two knitting needles. Simple and at the same time unusual way knitting. You can knit two parts separately, but in our master class we will learn how to knit together, but with one inconspicuous seam. The mittens are long.

What you need for these mittens:

• yarn of the selected color;
• two knitting needles;
• pin for knitting and standard;
• scissors;
• hook;
• needle;
• measuring tape.

We begin to knit the first part. It is necessary with the help of a measuring tape to make measurements of the wrist, the length of the palm and thumb of a man. Now we collect 38 buttonholes, if the wrist has a diameter of 20 cm. You can calculate for each wrist like this - you need to find out how many buttonholes will be 1 cm, in our master class there were 2 buttonholes per 1 cm. It turns out a total of 40 buttonholes, subtract 4 and add 2 hem.

Knitting begins with a cuff - we knit an elastic band two by two. We knit 10 cm in this way, it turns out 15 rows. Then we begin to knit the main part, you can take thinner knitting needles. Having knitted the first row with facial ones, already in the second we add 4 buttonholes. And now we just knit 7 rows until we reach the thumb. Remember that the finger is located closer to the palm, and not to the side. Therefore, we knit like this for the right hand:

We knit two buttonholes and remove them on a pin. Now we knit 7 buttonholes for the finger, and remove the next ones on a pin. It turns out that on the working needle we will leave only 7 buttonholes for the finger. Then we knit with the usual viscous in height, the length of which will be the length of the finger, doubled. We go back down, thereby folding the finger in half. We knit according to the main pattern to the tip of the little finger. We need to divide all buttonholes into two. We move one half to a pin.

Now we begin to make a decrease. Edge - one buttonhole according to the pattern, we knit two buttonholes together. And when there are only 4 on the needle, we knit two together and one purl, like a hem. Purl rows knit according to the pattern. One edge, then front, we connect two into one, we knit 12 front, again we combine two into one and one front, edge. And so we decrease the buttonholes until there are from 6 to 8 left. Now we close the buttonholes and also knit the second half. The final touch will be neat stitching of the details.

2 years ago

Nothing will warm your man's hands like mittens, hand-knitted by the woman he loves. Even a beginner can easily knit original, stylish and, most importantly, warm men's mittens with knitting needles. Knitting patterns for such a product are different, choose what you like.

Not all representatives of the strong half of humanity wear mittens men's knitting needles. Schemes and descriptions of such products allow novice needlewomen not only to choose the appropriate option, but also to easily knit warm mittens that will harmoniously complement the male image.

Advice! Before you start knitting mittens, measure the width of the palm and its length. Then, from the selected yarn, knit a 10x10 cm canvas and determine the knitting density. If you knit mittens with a jacquard pattern, weave the threads only from the wrong side.

Necessary materials:

• yarn white color wool mixture - 100 g;
• yarn of blue color wool mixture - 50 g;
• knitting needles size No. 5.5, No. 6 - set;
• pin.

Step by step description of the process:

1. We knit beautiful and stylish mittens for a man with a jacquard pattern.
2. In our work, we will be guided by such a scheme. When knitting jacquard pattern thread color should be changed in accordance with the scheme. One cell corresponds to one knitted loop. It is most convenient to knit a product from several balls.
   
3. Let's take a closer look at knitting the left mitten. The right one will be knitted in the same way, with the exception of knitting the thumb. Here you need to take into account the principle of mirroring. Loops for knitting the thumb on the right mitten should be left on the left side.
4. On knitting needles in size No. 5.5, we collect 36 loops of blue yarn. We distribute all the loops on four knitting needles so that on each knitting needle we get the same number of loops, that is, nine each. We close the typesetting row in a circle.
5. We start knitting the cuff with an elastic band 1x1 or 2x2. We knit 18 rows in height, alternating faces. and purl. loops. Please note that with circular knitting, all rows are knitted the same way.
6. In the 19th row, we change the color of the yarn and with white threads we knit two rows with the front surface.
7. From the third row, we start knitting a pattern according to the scheme. We knit with the usual shawl pattern, that is, in one row all the loops will be front, and in the next - purl.
8. On the first two knitting needles, we knit 9 times the rapport shown in diagram A.
9. On the 3rd and 4th needles we knit 18 loops of rapport according to scheme B.
10. Vertically, the pattern shown in Scheme A consists of the first and second rows, and we knit the pattern rapport according to Scheme B in two rows, from the third we start knitting according to Scheme C.
11. Starting from the second row of knitting a pattern, we perform an increase in loops. We do this on the second knitting needle, knitting two from one loop. The addition is performed as follows: we knit the front loop, but do not remove it from the left knitting needle, but we knit it again. Only after that we drop the knitted loop from the left knitting needle.
12. We knit the second row according to the following scheme: we knit 5 front loops, we knit the next loop crossed from the broach, then again we knit two front loops, and the next one will be crossed from the broach. We knit two more facial loops. There are 11 loops in total.
13. We knit the third and all subsequent odd rows exclusively according to the pattern, how the loops lie.
14. The rapport of the fourth row looks like this: we knit 5 front loops, knit the next one with a crossed front one with a broach, 4 front ones and again a front loop crossed from a broach. We finish the row with 2 facial loops. It turns out 13 loops in the work.
15. In the 6th row we knit 6 facial loops, we knit the next one with a crossed front one from the broach, we knit 6 front ones and one loop of the front one crossed from the broach, 2 more front ones.
16. The rapport of the eighth row looks like this: we knit 5 front loops, we knit the next one from the broach with a crossed front one, we knit the next 8 loops with the front ones, then we knit a crossed front loop from the broach, we knit two more loops with the front ones.
17. In the 10th row we knit five facial loops, we knit the next one from the broach with a crossed front loop, we knit another 10 front loops, we knit the next one from the broach with a crossed front loop, two front loops. It turned out only 19 loops.
18. The loops that we added are introduced into the pattern and continue to knit according to the pattern.
19. In the 12th row, we knit loops in the following way: five faces. loops knit faces. 14 loops will remain on the needle, we transfer them to the pin and leave.
20. In the next row, over the loops of the wedge, we collect two loops and continue to knit the mittens in a circle according to the pattern.
21. So we continue to knit until the product reaches a height of 16 cm. We focus on the height of the little finger.
22. After that, we proceed to knitting a rounded toe.
23. In the first row we knit one front loop, we knit the next two loops at the same time with the front one, making a tilt to the left, then - 12 front loops, we knit the next two loops at the same time with the front one, making a tilt to the right, we knit 2 front loops, and we knit the next two loops at the same time the front one, making a tilt to the left, we knit 12 faces. loops and the next two we knit together faces. loop, making an inclination to the right side. We finish the row of faces. loop.
24. We knit the second in a row and all subsequent even rows without reductions only with facial loops.
25. In the third row, we will again perform a decrease according to this scheme: we knit 1 front loop, the next two we knit at the same time the front one, making an inclination to the left, 10 front loops, the next two we knit at the same time the front one with an inclination to the right, 2 front loops, the next two we knit at the same time the front one, performing tilt to the left, 10 front loops, we knit the next two at the same time front, making a tilt to the right. We finish the row with a front loop.
26. In the fifth row we knit 1 persons. a loop, we knit the next two at the same time faces., making a tilt to the left, 8 faces. loops, the next two we knit at the same time faces., performing a tilt to the right, two faces. loops, the next two we knit at the same time faces., making a tilt to the left, 8 faces. loops, we knit the next two at the same time faces., tilting to the right, 1 front loop.
27. In the 7th row we knit according to this rapport: 1 front loop, the next two we knit at the same time the front loop, tilting to the left, 6 front loops, the next two we knit at the same time the front loop, tilting to the right, 2 front loops, the next two we knit at the same time the front loop, tilting to the left, 8 front loops, the next two we knit at the same time the front one, tilting to the right, 1 front loop.
28. In the 9th row we knit 1 facial. Next, we knit two into one, making a tilt to the left, 4 front loops, two simultaneously front with a tilt to the right, 2 front loops, we knit the next two at the same time with the front, tilting to the left, 8 front loops, we knit the next two at the same time with the front, tilting to the right, one face loop.
29. According to the same pattern, we continue to knit two more odd rows.
30. We cut off the working thread, transfer it to its remaining loops and pull it together well.
31. Crochet the thread to the wrong side. We knit the loops set aside on the pin to the desired height.
32. Approximately from the middle of the nail on the thumb, we begin to decrease until 4 loops remain on the knitting needles. We close them in the same way as described above.

1979

Knitted items never go out of fashion, and are especially relevant, for obvious reasons, in the cold season. If you wish, you can create a miracle for each family member with your own hands. This needlework is available for those who know how to hold knitting needles and are familiar with a variety of loops. To make the products colorful, use patterns describing patterns for knitting mittens with knitting needles.

Mittens can be knitted different ways:

• crochet;
• traditionally (2 knitting needles);
• using a set of needles.

As a result, they are obtained whole or from parts that are sewn together. On five knitting needles, a product without seams is obtained. First, the dialed loops are divided equally into 4 knitting needles, the remaining one will be working. On the top and palm accounts for half. If you knit loops on all knitting needles, you get one row. When knitting mittens, patterns designed for 2 knitting needles are often used.

This requires compliance with certain rules:

1. Since this is a circle, all the loops on the wrong side are knitted in reverse: the face is the wrong side, the wrong side is the face.
2. When knitting with a set of knitting needles, pay attention only to odd rows, which are knitted twice.
3. All even rows are counted from right to left, but the loops are knitted in reverse: the wrong side is the face, the face is the wrong side.
4. If there is a shift in the pattern both on the face and on the wrong side, then all odd rows are knitted, as shown in the pattern for traditional knitting.

Knitting mittens with front stitch

Knitting at first is difficult for those who first picked up knitting needles. It is better to improve your skills on knitting simple things: socks, mittens, scarves. These items are necessary for a person. Nowadays you can buy them, and if they are tied by hands loved one, then it will become pleasant and the right gift.

Yarn selection

Yarn for mittens is chosen depending on weather conditions.

She may be:

• woolen - for severe frosts with winds;
• half-woolen - for variable temperature;
• acrylic - for small children.

Children under one year old are not comfortable in mittens made of wool and wool mixture, because it has the property of "biting". Despite the fact that acrylic is a synthetic fiber, it retains heat very well. Knitting threads can be dyed in one or more colors. There is a so-called fancy yarn. It has bumps and villi.

Things connected from such threads are original and fashionable.

Wool consumption for mittens:

• children's - from 50 to 80 g;
• women's - 80-100 g;
• men's - 100-120 g.

Needle selection

Knitting needles are the main tool of the knitter. They differ in purpose, in material of manufacture, in thickness. A sweater, jumper, jacket, dress are knitted with paired knitting needles or interconnected with a fishing line (circular). The needles are made from various materials. The knitter selects them at her own discretion.

What you need to pay attention to:

1. Lightness - the hand gets tired quickly from heavy ones.
2. Sliding thread - well-finished products do not catch the thread, which allows you not to be distracted and not nervous in the process.
3. End - the knitting needles should not be too sharp so as not to injure the fingers, blunt ends will hardly pry the thread.
4. Size - is determined by the diameter of the needle and is measured in millimeters. They are selected depending on the thickness of the thread. The density of knitting is achieved by the ratio of the thickness of the needles and yarn. On a skein of thread, the manufacturer indicates the number of knitting needles for knitting with this yarn.

Steel needles are good for fine yarn. They are not long, the surface is slippery, the hand does not get tired of the weight. Aluminum - stain the thread. Therefore, they are only suitable for dark yarn.

For mittens with patterns, according to the schemes with a description, knitting needles of different thicknesses are selected. For example, for knitting braids, harnesses, thicker tools are needed, and for an openwork pattern, thinner ones. Experienced craftsmen knit an elastic band with knitting needles 1 size smaller than the main part.

Required measurements

In order for the mittens to fit and sit perfectly on the hand, the following measurements are necessary:

Stages of circular knitting of plain mittens on four knitting needles

Having everything you need at hand (knitting needles, yarn, measurements), you can start knitting.

A set of loops and knitting elastic bands

First, knit an elastic band. To keep warm, it should fit tightly around the arm and not be short. In children's products, this part is at least 3 - 4 cm, and adult mittens look beautiful with an elastic band from 7 to 9 cm. If desired, it is knitted longer to make a fold. So it will look more voluminous. Elastic band - alternation of facial and purl loops: 1 × 1, 2 × 2. This gives it elasticity.

To determine the number of loops for elastic, use several methods:

1. It is necessary to knit a sample of 20 loops. By measuring, they find out how many loops are 1 cm. For example, there are 3 loops per 1 cm, and the width of the wrist is 16 cm. Multiply 16 by 3 and get 48 loops.
2. They clasp the wrist with a thread for work and increase it 3 times. Loops are collected from the resulting length.

Knitting tools should have the same number of loops.

Cast on 48 sts. Knit the first row of stitches with the face and inside out. Distribute 12 sts on knitting needles and connect: tie the remaining tail and knitting thread. This place marks the beginning of a new row. You can mark it with a pin. So the serial number of the knitting needle is accurately determined, this is important for further work.

Stitch knitting technique

Patterns for knitting mittens with knitting needles, descriptions of which can be found on the Internet, will seem complicated to beginner craftswomen. Therefore, it is optimal for them to start work with a simple one - knit loops with front stitch.

Knitting a hole for the thumb

The place for the finger is performed as follows:

1. They determine which needle the finger will be on: for one hand - on the third, for the other - on the fourth.
2. The first loop is knitted, then after 10 sts a thread is threaded and tied. Immediately add the missing 10 loops, and knit the remaining loop.
3. They do the same when knitting the left mitten on the corresponding tool.

Creating a toe

To create a toe, the reduction of the loops begins. On the first and third needles, they are knitted two at a time at the beginning of the row, on the second and fourth - at the end.
Decrease every three rows until 8 sts remain. All loops are pulled together with a thread and hidden on the reverse side.

Thumb knitting

To tie a finger, loops are collected on a working tool, and the missing ones are added from the edge. They are divided into 3 parts, and the fourth work.
They are knitted with facial to the middle of the nail plate, and then they begin to decrease 2 loops on each tool until everything remains. They are pulled together with a thread, which is fixed on the wrong side.

Knitting mittens with an openwork pattern - a description and patterns for beginners

Patterns for knitting mittens, patterns with a description of the craftswoman are collected in collections using every opportunity: master classes, educational literature, the possibilities of the Internet. They vary in degree of difficulty. A beginner needlewoman will choose for herself suitable pattern to develop knitting skills.

You can start improving your craft by using threads of different colors. Take balls of different colors. The result is striped mittens. Colors can be bright, contrasting for children's mittens. Using stripes of the same color, but different shades, get a more refined version.

On the Internet, you can find and use patterns for knitting with the jacquard method. In this case, patterns are knitted with a thread of a contrasting color. various subjects. The mittens are dense, as the threads are intertwined on the wrong side, creating an additional layer.

Complexity openwork patterns is that the work requires a constant count of the number of loops.

After all, the beauty of the pattern is created by adding them with the help of cap loops and decreasing by knitting 2, 3 loops together. In this case, the number of loops remains unchanged. One mistake leads to a skewed product.

Schemes describing patterns for knitting mittens are offered by many sites. When knitting with front stitch is fully mastered, you can proceed to the use of simple patterns. They are knitted after the gum is formed on the upper side of the mittens, that is, facial loops are knitted on the palm.

Pattern number 1. "Pigtails"

A simple braid pattern will be mastered by a beginner:

Pattern number 2. "Royal braid"

This pattern is more complex than the previous one. Its difference is that the loops are interchanged, first leaving part of the loops in front of work, then behind. It turns out that the pigtail either diverges in different directions, then converges.
In this pattern, only loops knitted in the front way. The loops are interchanged after 5 rows. For the pattern, 22 loops are needed.

Pattern number 3. "Openwork hearts"

This pattern is a test of possibilities for a beginner craftswoman.

The contour of the hearts is obtained thanks to holes from knitted air loops:

1. For one heart, you need 13 loops if it is a large pattern, and 11 for a small one.
2. The loops are divided equally, they are knitted in half, a slip loop is made and immediately two loops are together so that their number does not change.
3. In the next row, the slip loop is knitted at the back.
4. In odd rows, two caps are made, and two together next to each other.
5. Between them, increase the number of loops to 5.
6. This is done in 3, 5, 7 rows. At 9 p. there will already be three cap and 3 p. two together.
7. At 11 p. - four caps, and between them 2 times three together. Then the pattern is repeated.

Pattern number 4. "Asterisks"

You can use a simple pattern that will decorate children's mittens.

An asterisk is knitted from three loops:

• first three loops together,
• then cape,
• again knit these three loops.

They are arranged depending on the number of loops in a checkerboard pattern. Between the stars there are loops connected in the front way.

Pattern number 5 "Bumps"

The pattern is simple to perform, and is a knitting from one loop 3. Then the fabric is turned and these additional loops are purl. Return the knitting, and shorten the loops by knitting them together.
Place the picture as you wish. It is good for both children's products and youth mittens.

Down mittens

AT very coldy mittens made of downy yarn will help protect your hands from the cold. Products made of fluff are comfortable, warm, light. To create a downy thread, the wool of a special breed of goats is used, which is grown in Russia in three regions: Volgograd, Orenburg and Altai.

A special technology makes it possible to obtain a thin and at the same time strong thread, from which craftswomen create things of amazing beauty.

Down properties

Goat down is completely natural. The beneficial effect of down fiber on the human body has been noticed since ancient times. Its healing properties are used in nursing premature babies. To do this, babies are wrapped in downy scarves that keep warm. elderly people they are saved from radiculitis, osteochondrosis and arthrosis with the help of downy yarn products.

For colds, alcohol compresses are replaced with a bandage from a downy scarf.

Down products not only retain heat, but also remove excess moisture. In downy mittens, socks, hats, the body will always be dry. The hypoallergenic property of goat down is used in the manufacture of children's things. Down mittens have increased wear resistance. Dirt hardly sticks to them. Proper care will allow them to remain in excellent condition for a long time.

The choice of knitting technique from downy yarn

Down yarn mittens are knitted with stocking needles (a set of five) in a circular pattern. Products are warm, soft, light and durable. A thin fluffy thread lies flat, pleasant to work with. The upper part of the mittens is decorated with braids, plaits, openwork patterns. Openwork fantasies do not at all reduce the warmth of the product. Therefore, the possibilities of knitters are endless.

Pattern "Openwork leaves"

The pattern requires 22 loops. The scheme of the pattern is designed for an attentive craftswoman. Counting the number of loops is the key to success.
The pattern is obtained thanks to the holes from knitting the caps, made by the facial method, and rearranging the two facial loops. They diverge to the right and left of the central purl loop.

Bindweed pattern

On downy mittens, a pattern consisting of unusual flagella will look good. The tourniquet itself is an alternation of loops knitted in the front and back ways. Every 10 rows there is a crossing on one side to the right, on the other - to the left: first knit the front, then the wrong loops.

There are a lot of patterns for knitting mittens with knitting needles. Schemes with a description will not become clear immediately. Persistence and desire will help overcome difficulties.

Choice of yarn color

Natural down yarn has different colors: white, grey, black. White thread products are the most spectacular. Modern designers believe that down toilet items go well with fashionable clothes. A set of a hat, scarf and white mittens will make the girl irresistible.

Men's mittens

In cold weather, men will not give up warm mittens, hands tied beloved woman. They are indispensable during walks in the park, ski trips in the forest, on the skating rink.

When creating men's mittens, the same methods are used as when knitting women's and children's products:

• choose the yarn and the desired number of knitting needles;
• do necessary measurements;
• start knitting with an elastic band, which should not be short;
• knit the main part before making a hole for the thumb;
• continue knitting until the loops decrease;
• create a toe;
• knit thumb.

When choosing a yarn color, you need to take into account the preferences of a man: black, blue, gray, brown, bottle, khaki. To decorate the top of a warm pair, they use all kinds of relief patterns: plaits, braids.

Patterns describing patterns for knitting mittens with knitting needles are not always suitable for men's products. You can use the "Pearl" pattern, which represents the alternation of front and back loops: if in the first row they knit with front side, then in the next row in its place they knit from the inside out. This is a simple drawing, but it looks decent.

Knitting is one of the ancient types of needlework, but its popularity not only does not fall, but only grows every year. The fantasy of knitters knows no bounds. desire to do related thing special and unique finds understanding among connoisseurs of hand knitting.

To knit a kit you will need: 200 g for a scarf, 100 g for mittens and 50 g for a hat of Mondial COLORADO melange yarn (58% merino wool, 42% acrylic, 135 m / 50 g); knitting needles number 4.5.