How to break in shoes that are too tight. How to break in shoes that are too tight? How to stretch rubber boots

There are several ways to answer the question of how to distribute tight shoes. But before proceeding with actions, it must be remembered that only Genuine Leather. Other materials are extremely difficult to stretch without violating their integrity. It is pointless to stretch shoes that are small in length.

There are several reasons why we buy shoes that are smaller than necessary. Knowing them, you can avoid mistakes and choose the most comfortable pair for your feet.

  • If your legs are noticeably swollen, then it is better to make a purchase in the afternoon. Then you choose a little larger size, and you will not suffer with the solution of the question of how to break in shoes that are too tight.
  • Take your time to buy a very nice and cheap pair, because in a hurry you may not notice that it is a little small for you. Try on, walk around the store a little, making sure that neither the left nor the right shoe is squeezing your feet.
  • For those who changed their minds when they came home and wanted to return their shoes, there is always such an opportunity. Therefore, keep the receipt and get acquainted with the rights of the consumer.

For stretching the skin there are folk remedies and funds produced by specialized companies.

Sprays, creams and pads

Some shoe stores sell special spray foam and cream. The funds are applied to areas of the shoe that are especially pressing. On delicate suede shoes, the foam is applied only from the inside, and on smooth skin inside and out for greater effect. It softens the material, making it easy to stretch.

After that, you should put on socks, put on shoes and walk around in tight shoes until the foam dries. If necessary, this stretching procedure is repeated for several days in a row.

For those who want to break in new shoes quickly, you can suggest using a last, such as in shoe shops. After treating the skin with the same spray, and applying the block at night, you can test the result in the morning.

Alcohol solution or vinegar

A well-known recipe for breaking shoes is the use of vodka or an alcohol solution. Immediately, we note that suede shoes cannot be stretched in this way. Vodka moistens the inner surface, put on shoes and walk in them until the skin dries. Since the alcohol evaporates quickly, you won't have to wait long. Then repeat the process until the shoes take the desired shape.

For those who know how to break tight shoes with vodka, we offer another method that uses vinegar. They take 3% vinegar, moisten the inside of the sock with it and stretch the new pair by wearing it. This allows you to slightly expand the lower part, give more freedom to the fingers.

Water use

When there are no special tools at hand, you can use plain water. To do this, wet cotton non-shedding socks, put them on and put on shoes. You should walk like this until the socks are dry.

This method is also applicable to suede shoes. Although it stretches very well, it happens that the first days of the shoe are very tight. You can quickly break in a new suede pair by resorting to the above method. Just be careful with suede and do not let water get on its surface, otherwise the shoes will lose their appearance.

If the model requires especially careful handling, then you can moisten it by wrapping the shoe box with a wet rag and leaving it like that for several hours. This is the most gentle method of exposure to moisture. Then the moistened shoes or sandals are worn in the usual way.

Sometimes, in order to make leather shoes more comfortable, boiling water is poured inside for a few seconds. But this method should be applied to shoes or boots with great care, as they can simply stick out.

The original way is to use water that is frozen. It is known that water expands when frozen. If you place a tightly closed bag of water inside a sneaker or shoe and then send it all to the freezer, the ice will expand the leather shoes.

How to soften skin

Many are interested in whether it will be possible to carry leather shoes after long-term storage. You have probably noticed that if the shoes are not worn for a long time, they become a little tight and seem to narrow. The material dries and hardens, and at the same time there is discomfort when worn, calluses appear on the feet.

In this case, you can soften with Vaseline or vegetable oil. These tools are suitable for faux leather. Just remember to thoroughly dry your boots afterwards. In addition to softening, natural vegetable oil helps to get rid of the slip of the sole. Just put some oil on a clean, dry sole and rub it in.

Best to apply Castor oil, because it does not leave a smell, it is quickly absorbed and gives the skin elasticity.

Newspapers

An old and proven way to expand shoes is newspapers. With its help, even things made of artificial materials, as well as fabric, are increased in fullness.

First, the shoes are held over the steam for several minutes so that they are slightly moistened and warmed up. Newspapers are soaked in water, squeezed out, and I begin to put them inside the shoes. It should be laid very tightly and carefully, repeating the shape of the shoe, otherwise your shoes will become crooked after drying. Stuff the newspapers as tightly as possible so that they slightly widen the rise, as if increasing the volume.

After that, you need to leave the shoes to dry naturally at room temperature. You can not put it on a heater, battery or leave it in the bright sun. The drying process should be even and gradual.

When the newspapers are completely dry, they are taken out and given some increase in size. Instead of newspapers, you can use any paper or old socks.

You can find other ways to increase the size of beautiful, but not very comfortable shoes. Some use beer, others use paraffin or oatmeal that swells when wet, even peeled potatoes to slightly stretch the skin. But still, it is better to buy boots, sneakers and shoes of the right size and not suffer.

The joy of buying new shoes or boots can be overshadowed by the fact that the shoes are tight. And this can happen even after a few weeks of wearing. There are professional and improvised means that will help with this. But before use, it is recommended to test the selected composition.

Why do shoes rub?

Before choosing methods for softening and breaking in shoes, you need to understand why they rub. There are several reasons:

  1. Incorrectly selected size for the length and fullness of the foot.
  2. Too rough material. If the boots are too hard, then in 90% of cases they will rub the skin on the heels and toes.
  3. Incorrectly selected shoe model (too high heel or narrow nose).

Another reason is swelling of the legs, which happens with long walking. In this case, new shoes will rub periodically, which will lead to the appearance of corns on the feet.

How to choose the right shoes so that they do not rub?

To avoid problems with calluses on the feet due to inappropriate shoes, you need to learn how to choose them correctly. Convenience and comfort, not appearance and beauty should be in the first place when buying products.

  1. Before buying, be sure to try on shoes on both feet. Even if the couple is sitting comfortably, you need to walk around the store several times. If the product is large or a little tight, it is better not to buy, because. The backs will rub over time.
  2. Block - important point when choosing. She needs to be orthopedic.
  3. It is preferable to buy shoes made from natural materials.
  4. The time of purchase is also important. For example, in the evening, a slight swelling may appear, the leg increases in size, so you need to buy shoes during this period.
  5. Do not buy a product with too hard soles. It is better to give preference to a pair with a flexible and soft base.

It is not always possible to break in shoes that are tight and rubbing. If for some reason they do not fit, then it is better to refuse to purchase. Not all methods and professional tools will later be able to help stretch or soften the shoes.

How to soften shoes with folk remedies?

There are many improvised means that will help soften the shoes so that they do not rub.

Newspapers

This method is suitable for any shoes, including suede. If there are no newspapers, you can replace them with cloth.

To soften individual parts of the products or slightly expand the shoes, you need to fill each shoe with paper or cloth. The main thing is not to deform your favorite couple in the process. If there are slight distortions in the form, you need to correct the newspapers. Any defect in the future will cause inconvenience when worn. Shoes in this form should be left for 1-2 days. A similar method helps well if it rubs a hard back.

Alcohol

Alcohol softens shoes. However, the use of alcohol is not suitable for all materials. Before proceeding with the procedure, it is worth checking the reaction of the product to alcohol.

It is enough to moisten the rubbing areas with alcohol. And to enhance the effect, you need to walk in shoes for half an hour or an hour or put crumpled newspapers inside. Instead of alcohol, you can take vodka or cologne.

Alcohol should not be used to process suede products, because. this will damage the material. It is best to use beer for this, it is more gentle on suede, it will not damage the shoes.

Bags, water and freezer

The process is simple: they collect water in bags, put them in shoes and send them to the freezer for the night. As the water freezes, it expands and softens the steam a bit. The next day, the bag is taken out of the shoe and left at room temperature.

If winter boots rub the heel, then it is better to use this method. Winter shoes is not afraid of the cold, but it is best to use the method when working with natural leather, because. artificial ones can be damaged.

hair dryer

it effective remedy to expand the material. But it is best suited for genuine leather products, leatherette will simply become covered with cracks.

The reception is simple: for 2-4 minutes, hot air from a hair dryer is directed to places that are pressed and rubbed. After the procedure, put on thick socks and break in shoes for half an hour.

Corn

In another way, this method is called "cowboy". It is considered especially effective for stretching products in the rise. Grain is poured into the steam, then water is poured and left for at least 12 hours. During this time, the liquid will soak into the grain, causing the close rise to expand. It remains to remove the "filler" and wear the products for an hour.

Special shoe care

You can try to use special formulations and tools.

They are of the following types:

  1. Mechanical. These are wooden stretchers that allow you to adjust the process of stretching the block in length and width.
  2. Chemical. Sold in spray form. They simply process the inside of the shoes, then put on thick socks and walk around the house in new shoes. Most often, a couple of hours is enough for the products not to sting.

Before use chemicals you should carefully study the recommendations of the manufacturer and strictly follow them in order to protect products from damage. It is best to purchase products from manufacturers such as Salamander, Kiwi, Salton.

How to stretch and break in shoes?

natural material

When working with genuine leather, you need to be careful not to ruin your favorite shoes or boots. The first way is to use a fat cream or butter to make the material softer. They rub the area on the shoes, put on the product for half an hour. The procedure is repeated if the shoes are a little tight. However, not every type of leather can be softened in this way, so first check the effect of the oil on an invisible area.

Another effective remedy is a 3% vinegar solution. Instruction:

  1. Wet the sponge with the solution.
  2. Wipe the shoes from the inside.
  3. Put on shoes for half an hour.

You can soften the product with paraffin. The boots are rubbed with the rest of the candle, left overnight in this form. A quick and easy way to break in your favorite shoes.

To break in shoes made of genuine patent leather that rubs the heel, you can use any professional tool bought in shoe store. But there is also a suitable folk method:

  • warm with a hair dryer (only the inner space);
  • wipe with a fat cream;
  • put on a thick sock, break in shoes that rub the heels for 30-50 minutes;
  • apply the composition again and leave for 12 hours.

Patent leather is capricious, requires careful handling. If you need to stretch the material, soften it, then this is done as carefully as possible to avoid the appearance of cracks on the surface. Do not expose the steam to aggressive agents, which include alcohol, gasoline, vinegar. It is contraindicated to use a hammer to soften.

artificial materials

Similar products require a different approach. Many methods that are suitable for natural material can be dangerous in this case.

One option is to use alcohol. To soften the backs, make a solution of water and alcohol, taken in equal proportions, lubricate the product and knead with your fingers. True, this method cannot be used if there are cardboard inserts.

Vegetable oil will also help: they are wiped from the inside and left for at least 10 hours so that the composition is absorbed. The rest is removed wet wipe. If there is glycerin, it will help expand the material. And this is more fast way: it is enough to apply the product literally for an hour.

Back, heel

If new shoes rub the heel or the area above it, you can use several methods. But when choosing a suitable method, it is worth considering the material from which the product is made:

  1. Freezing in the freezer: 2 strong bags are filled with water, stuffed into boots and sent overnight.
  2. Sliding strips or slips made of silicone that are designed for uncomfortable shoes. They are glued on the inside and periodically changed until the product is carried to the desired size. They are inexpensive, sold in any shoe store, and are considered the most effective if the shoes rub the heels.
  3. A small piece of cloth is moistened in warm water, stuffed into shoes for half an hour. Then they take it out, and the inside of the products is treated with glycerin and left overnight. To enhance the effect, it is recommended to repeat the procedure 2-3 times.
  4. Glycerol. Moisten a towel with warm water, dip in the product, put in shoes for half an hour. After about 8 hours, genuine leather will soften, the product will not bring discomfort.
  5. Castor oil is applied to the rubbing parts of the boots to make the material softer.
  6. The back of the shoe, wrapped in a thick cloth, is tapped with a hammer. The pair is tried on from time to time to make sure the shoes are comfortable.

An even more effective remedy if the shoes rub on the back is a mixture of turpentine, wax and castor oil. All substances are mixed and applied to the area, and then a pair is worn for 10 minutes. Such a composition not only softens the material, but also protects against moisture.

Ankle

To soften shoes in the ankle area, you can use the following methods:

  1. A special spray is applied to the problem area, then put on thick socks and walk in a new pair for several hours.
  2. The desired area is smeared with cream, then wrapped in cloth and tapped with a hammer. After such processing, the material will soften and will not cause discomfort. And over time, the shoes themselves will sit on the leg.
  3. Rub with soap or wax. In a couple of days, the shoes will stretch.

If they press in the fingers

Sometimes new shoes are a little tight in the toes. To eliminate discomfort, you can spray or thoroughly wipe the inside with alcohol or cologne. After that, the pair is put on again and worn in for an hour.

But it is much more efficient to buy a special block, which is inserted inside, stretching to the desired width.

Can I return shoes to the store?

If the purchased product rubs, and there is no way to correct the situation, you can return the pair to the store. This procedure regulated by the Consumer Protection Act.

According to the regulation, the buyer can return a pair that does not suit him, subject to the following conditions:

  • no more than 14 days have passed since the purchase;
  • the receipt is saved, the box is undamaged;
  • the presentation of the product was not damaged.

If defects are found, the store has the right to refuse a return. Also, a common reason for refusal is non-compliance with other conditions.

But lawyers give some recommendations to help resolve the dispute with the seller. So, if the seller refused, you can write a claim addressed to the director of the institution by making a copy (may come in handy if you have to write a statement to the court). In this case, the store administration must respond in writing to the claim. Failure to respond may result in administrative liability.

If all conditions have been met, the buyer gets the right to take the money for the purchase or choose a new pair (if the pair is more expensive, the buyer will need to pay extra).

Sometimes even bought-to-size shoes are tight. And if you really don't like a pair one size larger, it remains only to break in this one. There are plenty of ways to break in tight shoes, and most of them can be used at home.

How to break in shoes at home

The methods of breaking in depend on what kind of inconvenience the pair creates:

    if it presses in the fingers, you can treat it with an alcohol-containing liquid (vodka, cologne, diluted alcohol), after which the sock must be gently wrinkled with your hands, stretching the problem area;

    if the shoes are small in width (fullness), we recommend using "freezing": take a double strong bag, place it inside, fill with water so that it reaches the top of the shoes, tie it up and put it in the freezer overnight. After you need to get, defrost and carefully remove the package. To achieve the desired effect, it may be necessary to repeat the procedure;

    if it presses on the heel, treat the heel with alcohol or simply dip it in boiling water, then put it on a hard surface and tap it with a wooden mallet from the inside, carefully working only the edge so as not to break the heel;

    shoes that are tight in length can be filled with boiling water, quickly drained, and then worn with a thick sock until it cools completely, or ask someone who has a foot larger than your size to walk in shoes for at least half an hour;

    you can quickly break in new shoes that fit in size, but are just harsh and rub corns by treating them with a stretcher spray for desired type skin. If you are wearing a pair for the first time, be sure to "insure" your legs - cover the places where corns usually form with a band-aid.

What else you need to know about breaking in

Before applying this or that advice on how to break in shoes at home, remember that stains can remain on light, suede leather and textile and leatherette products. Genuine leather is best influenced, but if shoes or boots have a lot of seams and decor in problem areas, you may not be able to cope at home. In this case, it is better to contact the workshop - they have equipment and means for softening and stretching, which guarantees the result and maintains quality.

Greetings, my dears!

We girls have our weaknesses. One of them may be the desire to be beautiful no matter what. Does it happen to you that you bought some beautiful dress, for which it’s good to lose a couple of kg, but you can’t refuse it and bring a pleasant purchase home? Assuring yourself that for him you will go on a diet right from tomorrow. Well, well, it’s good if you really lose the excess and shine in this outfit, otherwise it often happens that the thing remains untouched in the wardrobe.

The same thing happens with shoes. I have a friend whose weakness is shoe making. If she sees something interesting in a shoe store, then holding her at least seven will not help! Buy what you need and don't need. And if the desired shoes are still sold at a tempting discount, then everything is clear, she definitely will not pass by them.

This is true for many of us, some to a greater extent, some to a lesser extent. And just in such a fervor of consumer excitement, it is easy to grab a “slightly not your own” pair.

You come home and find that the shoes are rubbing! There is good news! This matter is often quite fixable, unless, of course, you bought 36 for your 39. And just today we will discuss, if shoes are too tight, how to stretch them? I will tell you all the secrets that I know myself, and that that friend shared!

How to break in shoes if they are too tight? There are several methods, let's look at them based on the material.

  • We pull the skin.

Genuine leather is perhaps the most best material for shoes. Beautiful, soft, easy to fit on the leg products. And stretching such shoes is not difficult, even at home. You can easily add about half a size. Just enough to dampen leather shoes and wear them indoors for a while.

Please, just do not soak the shoes and do not water them with a spray bottle - this may damage the paint or the insole, and the product itself may “lead”.

A good way: take not very thick socks, moisten them with vodka or diluted 2 to 1 with alcohol. Put on those wet socks and put on your shoes. Walk around the house for several hours. Dry the couple afterwards.

If the result did not suit you very much, then simply repeat the procedure, but with less alcohol, i.e. make a vodka solution.

Attention! Shoes can not be wiped with alcohol on top!

You can also use water, but to achieve the best effect, the temperature of the liquid, which we also wet the sock with, should be high, i.e. the most tolerant. You can even first scald the product from the inside with boiling water. Or blow them from the inside with a hairdryer on a hot air setting. Well, then put on socks. Be careful and don't get burned!

A good result can be achieved with the help of vinegar. Wipe the inside of the product with a 3% solution and wear it for a while. Should help!

  • And what about suede?

Consider now what to do with suede shoes if it rubs. In general, this material is perfectly worn in by itself, just walk around for a couple of days, and the shoes will calmly sit on the leg. But if you need to quickly increase their size, then choose the same "vodka" method that is offered for leather products.

Do not use water for these purposes, so that the product does not shed and become covered with stains!

Tip: take a thin sock for breaking in, otherwise suede shoes can become too big and then hang on your foot.

If the shoes are very tight, then it is best to use a special foam stretcher for suede. It is sprayed only inside the product, on those places that rub the most, after which the shoes also need to be worn with socks.

Important: do not use on suede fatty products, because they leave streaks and spoil the material!

  • Even the varnish will give in!

Perhaps this is the most difficult material to wear in. Firstly, such shoes are hard and in themselves are difficult to deform, and secondly, if you overdo it with the means, the varnish may crack. When deciding to buy such products, choose a pair that is suitable in length and where the fingers are definitely free.

If you still have to stretch new patent leather shoes, then fat comes to the rescue. What to do: Take castor oil, petroleum jelly or glycerin, lubricate the shoes both inside and out and wear them on the toe. The material will soften and the product will be able to stretch.

  • Leatherette, fabric and oilcloth - what to do with them?

Frankly, shoes made of such material are almost impossible to break. The thing is, it's cheap. artificial materials they just can't take the strain and break. Of course, you can try to stretch these shoes with water, but the risk is too great that the color will fade and stains will remain. It is best to use the "freeze" method, but more on that below.

Perhaps these are the main ways of wearing, but this is not the whole list. How are you doing? Tell me in the comments how else you can increase the size?

Contactless methods

Above, I talked about how you can quickly break in shoes on your own, but there are also methods to stretch shoes without wearing wet or alcohol-infused socks.

  1. Steaming.

Hold the shoes over the steam, and then put wads of newspaper inside. Lay them as tightly and as much as possible, but try not to break the shape. Then we leave the shoes to dry in a dry place (but in no case near the battery!) For about a day.

The disadvantage of this method is that there is a risk of divorce. And also, it is likely that after some time the product will dry out and begin to reap even more.

  1. Freezing.

A rather unusual, but effective way to expand shoes. Pour water into plastic bags(preferably with a special fastener) and insert them into the toes of the shoes. We put this pair in the freezer for a day. Freezing, the water will begin to expand and put pressure on the walls of the shoe, thereby stretching it. After the allotted time, we take out a pair, remove the bags and let the shoes “come to their senses” in a dry place.

Partial wear

It often happens that the product fits well along the length, and it is comfortable for the fingers, but it presses the back. How to deal with it:

  • Rub the back of your shoe with paraffin wax. Within a day you will be able to forget about this problem.
  • Loosen the butt with a hammer. Tap this area very gently to make it soft.

Before buying a new pair, it is worth remembering that it is impossible to spread:

  • Shoes for 2 or more sizes.
  • If the shoes are tight in the edging seam.
  • Products from some artificial materials.

How can a shoemaker help?

There is another way. Almost every shoe shop has a shoe stretching service. Everything happens simply, you say how much you need to increase, expand your shoes. Then the master looks at both the material and its quality, and if everything is real, then he puts them on special pieces. After a day or two, you pick them up and get the desired size.

For some this method works, for others it doesn't. I have used this service a couple of times but have not been satisfied. In the first case, my shoes were overstretched, and in the second, I didn’t feel any changes at all, and I still had to use my grandmother’s way of stretching (on thick socks).

When buying new shoes, it is best to close your eyes and listen to your feelings - are you comfortable enough in length, width and instep. The product simply must be comfortable, otherwise it can significantly worsen not only mood, but also health.

Wear only the right shoes and don't forget to share your ways in the comments on how to quickly put a shoe on the leg!

See you soon on my blog,

Anastasia Smolinets

Why rubs shoes? This question always arises when the fact is revealed that the purchased shoes, which correspond to the size of the foot and have been tried on several times in the store, suddenly turned out to be cramped in everyday use.

Criteria for quality shoes

Shoes - important detail the appearance of a person and one of the main foundations for the formation of his image, must meet such criteria as:

It is on these principles that such an important thing is chosen. And what a disappointment sometimes happens when the shoes you put on for the first time rub, which causes great discomfort when walking. In proportion to the appearance of calluses on the legs, the mood deteriorates catastrophically. It is not always possible to return a tight pair of shoes back to the store, buying another one is expensive, and not everyone can afford such unplanned expenses. at home?

The easiest way to break tight shoes is to take them to a shoe shop where they are stretched with special equipment. But you can try to take rescue measures yourself, at home. What to do so that the shoes do not rub?

Immediately after purchase

Firstly, you don’t need to go out in new shoes immediately after buying them, otherwise pain, discomfort and blisters will become an unpleasant end to a hard day.

Painful sensations in the legs can be relieved by immediately immersing them in hot water after removing the shoes. If blisters are found, dip your feet in a warm green tea bath for 10 minutes to soothe pain, reduce the likelihood of infection, and kill bacteria.

It is necessary to wear in the acquisition gradually: at first it is better at home (preferably a few days), giving the foot time to get used to new shoes or boots. It is recommended to pre-lubricate the legs with a fat cream. Then you can overcome short distances in new shoes: for example, to the nearest store.

If the seam of the shoe rubs, it should be treated with alcohol, lubricated with soap, rubbed with a candle or tapped on it with a hammer, putting a piece of material on top. The skin will lose its rigidity and stop rubbing. The procedure must be repeated several times until the desired result is obtained. What else can I do to keep my shoes from chafing?

old newspaper way

It is possible that the above measures will not have the expected result. In this case, if it rubs leather shoes, you can try the newspaper method, which was widely used in Soviet times. It was necessary to take a large number of newspapers, soak them in water, tear them into small pieces, with which to push tight shoes “to the eyeballs”. After these manipulations, the shoes should be left to dry for about a day. Moreover, drying should be done in a natural way, without placing the shoes next to the battery or other warming devices. In most cases, the result met expectations. Maybe, newspaper way not everyone will like it. The problem remains: rubs shoes. What to do? What other measures can be taken?

Wet towel handling

An affordable way to solve this issue is to use vinegar. It requires moistening a small towel, which is placed in tight shoes and left overnight. After drying, the shoes should fully take the shape of the foot and no longer cause discomfort. You can wrap a box of new shoes with a wet towel, and leave it for several hours. This will create a moist environment that will make the skin supple and soft. If necessary, the procedure can be repeated more than once. After such actions, the shoes will break in much easier.

Stretch shoes with alcohol

How to break in new shoes at home? Tight shoes from the inside can be rubbed with vodka, alcohol or beer, then put them on your feet and walk around the house for a while. Alternatively, the inside of the shoes can be sprinkled with boiling water. You should know that alcohol is not suitable for fabric and suede shoes, it can ruin its appearance. In this case, it is better to choose a different way of wearing.

Or put in the freezer

Rubbing shoes - what to do?

You can take advantage of the cold: you need to put plastic bags in tight shoes, fill them with water and tie them tightly. Then place the shoes in the freezer. As the water freezes, it expands and stretches the shoes.

Sprays to help

What to do so that the shoes do not rub? You can use store-bought products, in particular special sprays, the action of which is aimed at stretching tight shoes. Sprinkle the rubbing areas with an aerosol, then immediately put on a new thing and walk around in it for several minutes (preferably in woolen socks). You may have to repeat this action several times, but in the end the result will please you: the legs will become comfortable in the update. For more quick effect before applying the spray, it is recommended to warm up the shoes from the inside with a hot hairdryer.

Not to buy special agent, you can use the usual deodorant available at home, which is applied on the sides of the foot, as well as on the back surface from the heel to the ankle. Working as a protective lubricant, it will protect the foot from friction.

You can fill the toe of your shoes with a little lambswool, a breathable, airy material that, unlike a napkin, will not roll into a ball. Or you can use cotton swabs.

Also, to double the protective effect, you can purchase an anti-chafing foot balm at the pharmacy, with which to lubricate the legs in places where blisters and corns form.

Often, rubbing of the skin on the legs and the formation of calluses occurs due to the constant displacement of the foot from side to side. To avoid this, you can use tightly fixed and not moving gel or silicone insoles.

Still rubbing shoes. What to do?

You can reduce pain in the instep (which is important for high-heeled shoes) if you purchase foot instep pads that are glued to the front of the shoes (sandals, boots) where the foot fits the shoe.

So that new shoes do not rub, you can use soft strips sold in stores that need to be glued on the inside.

As an analogue, in places of rubbing, you can stick an adhesive plaster. There are also small silicone pads (heel pads) on sale that are attached to the heel counter in places of friction and do not allow the formation of corns. You can stretch shoes to the required size and comfortable shape with special blocks that are present in the assortment of shoe stores.

A few shoe tricks

  • If for some reason the shoelaces are left without tips, it is recommended to smear their ends with nail polish. The latter will harden, and the laces will easily enter the holes.
  • If light-colored shoes have lost their appearance, they can be easily repainted black: rub with a raw potato, then smear with black cream and clean to a shine.
  • Spots that appear on colored shoes can be removed by rubbing them with lemon peel.
  • If new shoes stain stockings, it is recommended to sprinkle the inner surface with talcum powder.

How to keep your shoes attractive and well-groomed

In order for shoes to be worn for a long time, always look well-groomed and attractive, you need to keep them in a dry, warm place and often rub with cream. It is worth remembering: the better the shoes, the less problems with it after purchase.

Be sure to make several fittings before buying. It is better to do this in the afternoon, when the leg is larger than in the morning. You should always carefully look after your own legs, and then new shoes will not bring discomfort, but sheer pleasure.