DIY hair band ideas. How to sew an elastic band for hair (detailed master class). Master class on making accessories

Every lady, regardless of age, likes beautiful jewelry. And mothers so want their little princesses to be the cutest and most beautiful. Today we want to help mothers and show how to make children's hair ties. Accessories for girls are always needed, and our task is to make them with our own hands. Our master classes are simple, such elastic bands can be made in just an hour.

Such interesting elastic bands can be made from braid or rep tape. We need 3 types of braid: 15 mm wide, 15 mm wide, and 5 mm wide. For roses, you need small pieces of pink and green satin ribbons. Rubber bands can be taken from old hairpins, or you can buy any inexpensive ones.

For work you will need:

Rubber bands.
Braid of 3 types.
Needle, threads in the color of the product.
We cut the braid into 2 hairpins, thus:
Black braid - 60 and 60 cm.
Pink braid - 60 and 60 cm and 35 and 35 cm.
Black narrow - 4 and 4 cm.

Let's take a 60 cm pink braid and mark it with a pencil into 7 parts, 8.5 cm each. Next, we also divide the second 35 cm ribbon into 7 parts, 5 cm each. We assemble and stitch it at the marked points.

Sew and fasten the thread tighter.

Sew as shown in the photo.

In the same way we sew a 35 cm tape.

We sew on top a small rose with a green satin leaf.

We fold a bow from black braid.

Sew or glue rubber bands. We use glue Moment.

So our master class is over.

What kid doesn't love strawberries? A simple and understandable master class will help you in the manufacture beautiful rubber bands for hair.

For work you will need:

Red satin ribbon (20 cm for 2 elastic bands). Width 5 cm.
Green ribbon (10 cm). Same width.
Thin braid in the color of rubber bands.
2 rubber bands.
Yellow beads.
Sintepon or cotton wool.

Cut off 2 pieces of red ribbon (10 cm), 2 pieces of green (5 cm), 2 pieces of thin braid (5 cm). Burn the edges with a lighter.

Then we take a red ribbon, bend it in half and fold it face inward, sew a needle on one side with a seam forward. We should get a voluminous berry. We twist on the face. We tighten the edge with a small stitch.

We fill the berry with synthetic winterizer and tighten the “leg”.

Then we take an elastic band for hair, sew or put a braid on the glue. Burn the ends of the braid.

Pass the braid through the green ribbon, sew the braid to the strawberry. Glue a little green tape to the berry at the junction to hide the ends of the braid.

We sew beads on the berry, it is better to start from the seam, and sew in a circle.

Back side:

In the video, a story about how to make a hair band decorated with a butterfly.

Hello dear readers! It would be quite difficult to do without hair ties, because sometimes you just need to put your hair in a ponytail so that it does not get in the way. And also it is necessary to note the fact that beautifully collected hair in a high ponytail or other modifications of it allow you to miraculously and not time-consuming transform the image. Do you want to learn how to make rubber bands yourself? Then get comfortable in your chairs, and study this review, which will tell you how to sew an elastic band for your hair.

A high ponytail with a stylish elastic band to match the clothes will look not just good, but really stylish! Well, since you yourself can make such elastic bands, your image will always look just perfect, because all you need to do is select the fabric for the elastic band in accordance with the material and color of the clothes.

Elastic band for hair with your own hands.

Necessary materials:

A piece of matching fabric.
Scissors.
Sewing pins.
Threads.
Elastic.
Sewing machine.

How to sew an elastic band for hair from fabric (stages of creation).

From the fabric we cut out a segment 20-25 cm long, 6 cm wide. Fold it along, and pin it along the edge with pins.

We sew on a typewriter a strip along the edge. But we do not reach the end of about 1.5 cm.

We turn the resulting tube out of the fabric. We pin and hem the two ends together.

Inside we pass an elastic band 10 cm long, and sew it by hand.

After that, you need to manually overcast the hole into which the elastic was inserted. But you can also flash this hole from the outside on a typewriter, as shown in the video below.

Want to sew something super light without bothering? Then my today's MK - How to sew an elastic band for hair with your own hands for you! I'll show you how to sew this stylish accessory, with which you can please yourself and loved ones, and another way - how to decorate a bun on your head.

How to sew an elastic band for hair with your own hands

I'll start, as always, with a list of what I needed to sew accessories:

velveteen fabric - 20 cm.
linen elastic - 17 cm.
threads in color - 1 spool
sewing tools - scissors, measuring tape, tailor's pins, safety pin, sewing machine

01. An elastic band pattern with a bow looks like this. Seam allowances are already included. You can build it immediately on the fabric, or on an A4 sheet, and then transfer it.

02. I cut out the details of the gum from velveteen.

03. I sew on the overlock the detail of the belt and bow. I did this on an overlock, but this operation can also be repeated on sewing machine. At the same time, I leave a hole in the middle on the bow, and both ends on the elastic.

04. Turning the waistband inside out with a safety pin

05. I turn the bow detail on the front side. I sew the hole manually with a thread and a needle. I iron. Corduroy is not afraid of ironing, so feel free to iron it with steam, after which it takes the desired shape.

06. I take a linen elastic band 17 cm long. I pass it through the part of the belt. I fasten the ends of the elastic with tailor's pins to the belt.

07. I sew the elastic band overlap with the details of the belt with the elastic band on top of each other.

08. I tie a bow around the place where the seam was formed. I sew the bow in several places to the elastic manually.

My rubber bands are ready, I was not too lazy and sewed three of them, for which there was enough leftovers in the fabric.

hair twist sophist

Now the fashion has gone to the 90s, which fell on the years of my youth. And who caught this time, probably remembers that at the peak of popularity we had such an intricate hair thing as a twist sophist. We twisted it on our heads as best we could, based on our imagination. Unfortunately, today I can’t boast of so many hairstyles, but on the other hand, I am now a master of hair gathered in a “bun”.

All I need for a beautiful bun is my sophist twist. No matter how much I looked, in stores it was always the same shade. Now I will show you how you can quickly and easily change its color and add "peppercorns".

01. I cut out a detail from velveteen that completely repeats the outlines of the sophist. I sew along the edge. Inside, I leave a hole equal in length to exactly the same on the hairpin.

02. I put a cover on the sophist, sew the inner hole manually with a thread and a needle.

Hair bands are a common and everyday thing. But even such a trifle can become a bright accent in your image, add charm, sophistication, unusualness and originality to it. Of course, you can pick them up in a store or order on the Internet, or you can sew and decorate rubber bands with your own hands. Such a product will be unique and inimitable.

Master class on making accessories

There are many different types of hair bands. They can be satin, textile, lace and even plastic. Depending on the style and purpose, they can be supplemented with feathers, beads, rhinestones and other interesting details. But first you need to learn how to make the basis for the gum.

Gum base

The basis of a hair tie from an ordinary linen gum is the first thing you need to learn how to do when creating unusual hair jewelry with your own hands.

For this you will need:

To make the base of the scrunchie, you first need to make a fabric "wrap" for it so that it looks aesthetically pleasing.

Take a rectangular piece of fabric. Fold it in half along the long side. front side inside and sew along the long edge.

If the workpiece turns out to be wide, you can connect the ends of the workpiece and flash it approximately to the middle, leaving a small hole for eversion.

Now the workpiece needs to be turned out, insert an elastic band, tie its ends and sew the opposite ends of the product. Ready product You can add it and decorate it with various decorative elements.

Satin bow

To light and gentle summer dress do-it-yourself rubber bands from satin ribbons are perfect. For their manufacture, you will need the following materials and tools:

finished workpiece;
satin ribbons and lace of any length;
beads in the color of lace or contrasting, but combined with them;
needle;
threads.

Rubber bands can be in the form of a bow or a flower.

For everyday wear, you can make elastic bands from rep tapes with your own hands. This is almost the same as satin ribbons, but they are matte and denser, they can have a variety of colors. In addition, this material is much more docile and does not require processing - the edges of the tape can simply be burned.

Option 3. Take a wide satin ribbon or a strip of delicate chiffon. Make a tie in the middle of the strip, along its entire length with a “forward needle” seam and tighten the thread. Should form a cute fluffy bow. Tie the middle with ribbon.

It is not necessary to make a new base for each gum on your own, you can use ready-made gum from the store.

flower decoration

To make a flower, you will need a ribbon, as well as a small base. You can take, for example, cardboard.

Cut a circle the size of the core of a flower, prepare threads, a needle and a button or a large bead in the center.

To make a flower, you need to pick up the ribbon along one edge so that when you tighten the thread, a circle forms. Do this twice with two different patches.

Now they need to be glued to the cardboard base so that it is in the middle. To disguise inaccuracies, place a beautiful button or bead in the center. Sew the finished flower to the base.

For an exquisite outfit and hairstyle, a rosebud in the hair of a young lady will look great. It is also made from satin ribbon. You will need a ribbon, a needle, threads in color. The step-by-step manufacturing process is shown in the photo.

Party decoration for a little girl

For a delicate summer or puffy ball gown, a headband with a rosebud made of thin translucent fabric is ideal. For example, you can use chiffon. For work you will need scissors, threads, a needle and a candle. Cut out squares of different sizes from the fabric (from 3x3 to 6x6, for example). Each type of 5-7 pieces at your discretion.

Now each of them must be carefully brought with tweezers to a burning candle so that its edges are slightly scorched and change shape. Do not forget about safety when working with fire.

When all the details are processed, collect them on a thread from the largest to the smallest. Sew a large bead or a beautiful button into the core. To finish, use soft green ribbons to create an imitation of leaves. This rose looks very impressive and will perfectly complement your outfit.

In a similar way, you can make not only a children's elastic band or bandage, but also a hairpin or even a brooch with a bud for an adult lady.

original approach

very interesting and original rubber bands for girls with their own hands - ears. They will require a base made in advance, and a small patch of bright fabric. The material can be any, for example, cotton. From the fabric you will need to cut out 2 parts according to the pattern.

Since only half of the part is shown on the pattern, the fabric must be folded in half along the fold line before cutting.

Sew both parts, right sides inward, but not completely, but leaving a small hole in the middle. Through it, the product will need to be turned out, if desired, fill the ears with a small amount of padding polyester or other filler. Only after that it should also be sewn up.

Pull the middle of the ears with a small strip of fabric or tape. Using it, sew the ears to the base.

Master class on creating an elastic band for hair

Felt accessories

Another material that is great for creating cute homemade jewelry for hair is felt. From it you can make bows, flowers, muzzles of various animals that will look original and unusual on any hairstyle. Felt does not crumble and keeps its shape well, as it is very dense. This allows you to not process cut parts.

To make a flower, you need to draw 2-4 patterns in the shape of a flower of various sizes and cut them out along the contour. And then sew together in order from largest to smallest. Add a button, rhinestones or a bead to the center.

You can make several flowers and attach them all to one elastic band. You can sew them around the perimeter or connect 3 flowers into a small bunch, and then attach to the base.

To make rubber bands with animals, use the most simple patterns. You can sew several pieces of felt to give the figure thickness, or join 2 identical pieces and add some filler inside. For example, you can make a cat. He does not need to make a tail, use only the main part of the pattern.

A set of beautiful and bright hair ties can serve as a wonderful gift or a nice bonus to a great gift for your good friend, sister, niece, daughter. Small child will be delighted with a bright product, and adults will appreciate your creativity and attentiveness.

Attention, only TODAY!

Hello my dear friends and blog readers. Today I want to tell you how easy and simple it is to sew elastic bands for hair out of fabric. I made mine as a gift for my daughter's eighth birthday.

Dasha has been asking me for rubber bands for a long time, but with work, a dacha and a business, finding time for even minimal tailoring turned out to be not at all easy. Be that as it may, now my daughter is glad that her wish list has become a little bit shorter, and I am glad that I learned a new way to sew an elastic band.

In my youth, I often sewed such elastic bands for myself from different fabrics: velor, velvet, denim, silk. I especially remember one: from knitwear in natural colors, which I crocheted around the edge. To her in the kit I sewed a fabric headband and a top, also crocheted. Since then, the sewing method has been forgotten and I had to surf the Internet to remember how such rubber bands are sewn.

materials: