Tulip flower from rep ribbons. Tulips from ribbons using kanzashi technique, a step-by-step master class for making a bouquet. Let's try to make a delicate tulip from a ribbon with our own hands

You can create a joyful and bright, spring mood in the apartment with the help of a picture that depicts tulips from satin ribbons. The master class will be presented in the article.

Ribbon picture

Recently, sewing with ribbons on fabric has become popular. Flowers are voluminous, bright and shiny, and the picture is spring and joyful.

Let's take a closer look step by step instructions how to make such flowers. You will need satin ribbons. Not too wide are selected, from about 1.5 to 2.5 cm. For leaves and stems, you will need wider green ribbons, and for flowers, choose natural shades of natural petals.

Ribbon sewing

Before starting work, you need to buy a background piece of crepe satin or gabardine and a wooden frame. We stretch the fabric on it from the back side and draw the contours of tulips in small pieces. We begin the master class from satin ribbons by inserting a ribbon into a needle with a wide slot and sewing one flower with several stitches along the length of the bud.

When all the flowers are done, we begin work on the stems. Having inserted a needle with a ribbon from the wrong side, it is wound up to required length. Then we again draw the lower part with a needle to the back of the picture.

It remains to consider a master class of tulips from satin ribbons, showing how to create leaves. To do this, take a wider ribbon and thread it through the fabric from the back of the picture. The first puncture is made from the bottom of the picture, then the tape is twisted to the other side and inserted into the fabric from above, in the place where the leaf will end.

kanzashi tulips

You can make tulips from satin ribbons using the well-known and popular technique. Such flowers can be attached to a girl's hairpin or used as a wedding bouquet.

Let us consider in more detail how the elements of such a flower are made. It is necessary, in addition to tapes, to buy more. With the help of it, all the main elements are made.

How to make leaves?

We take a wide green ribbon and cut it into several identical rectangles. Then each piece is folded in half on the wrong side, and the edges are connected with a glue gun. When the sheet is completely dry, the part is turned inside out. front side. We will supplement the master class of tulips from satin ribbons with a story about how the leaves are attached to the rest of the structure.

Many leaves and flowers are made at once, the manufacture of which will be described below. Then the whole bouquet is sewn with threads from below.

How to make petals

To make tulips from ribbons with your own hands, you need to cut out squares from a wide ribbon. Then the part is folded four times, the raw edge is cut in a semicircle. Next, the elements are stitched along the edge with stitches and tightened so that the petal is gathered. In order to make a tulip, you need to make several of these petals.

Then the bottom of the flower is folded together, the petals are distributed on all sides. The lower part is sewn to the stem. Now you need to connect all the flowers in a bouquet. First, tulips are collected in the middle of the bunch. Then the leaves are distributed along the edges so that they are supported all together. From below, the bouquet is tied with a beautiful bow. It can be sewn on so that the decoration does not slide down along the slippery satin.

Such beautiful bouquet can be made for a bride for a wedding using white ribbons to create tulips. Also, the kanzashi technique is often used by craftsmen to make hairpins or bows for girls. Such beautiful bouquets of tulips can be sewn to a round felt base and made into a festive bracelet on your hand or attached to a headdress by tying it with a ribbon. Not to mention creating wall panels and pictures in a frame that can be put on the table.

Creating flowers from satin ribbons is interesting and fast. Big beautiful picture can be done in a couple of hours. So do not hesitate and try to make your masterpiece, especially since detailed instructions you have already read in the article.

Kanzashi crafts are in trend today, so do not give up the pleasure of learning this needlework and making it one of your hobbies.

Take in assistants step by step photos and step by step wizard-Class to create a miniature bouquet of tulips - boutonnieres made of satin ribbons and lace using the kanzashi technique. This composition is perfect as a decor on baby suit or holiday dress, also it can be used as a decorative bracelet or decoration for a hairband, headband, bag.

Boutonniere materials and tools for work

To make a beautiful boutonniere from ribbons with your own hands, prepare the materials. You will need:

satin ribbon 2.5 cm scarlet;
silk ribbon 2.5 cm pale blue;
satin ribbon 2.5 cm deep green;
milky lace 4 cm wide - 18 cm;
three round sewn-on (adhesive) rhinestones;
a piece of felt measuring 5x5 cm;
candle and lighter;
scissors;
polymer glue such as "Dragon" or "Titan";
ruler;
threads white color and a needle.

If you are completely unfamiliar with this needlework and terms, look at the introductory one on our Women's Hobbies website.

Step-by-step manufacturing technique with photo

Take a 5cm x 5cm piece of dark olive felt, cut off the corners and carefully round to form a perfect circle out of the square.

Take a piece of milky lace, a needle and thread. Sew the thread all over its inside.

Pull the thread on both ends towards you. Make sure that the length of the inner stitched part of the lace is equal to the length of the perimeter of the circle.

Sew the lace into a neat ring and join the edges.

Glue a felt circle in the middle. The base for the boutonniere of satin ribbons is ready!

To make green leaves, cut the satin ribbon into 9 cm lengths.

Take one of the pieces and place it on a horizontal line wrong side up.

At the points of the middle of the segment, wrap the fabric forward and down. Mark the center point on the fold line. Fold the tape along the center point of the fold line forward. Form the fabric into a neat petal.

Fold the petal in half lengthwise. Then wrap the bottom side edges back to the fold line. Form a neat petal from the fabric. Scorch its lower edge over the fire and press down with tweezers. One of the petals for the pillow is ready.

Working in this mode, make 7 neat petals of bright green color from kanzashi satin ribbons for tulips.

Glue the green petals in a circle onto the lace and felt base. Make sure that all the leaves are glued evenly and symmetrically.

In the next part of the master class, you need to make tulips using the kanzashi technique. Cut a 2.5 cm red satin ribbon and blue color into segments of 21 cm (total 3 segments).

Take one of the cuts. Lay face down. Retreating 2.5 cm, bend it forward and down.

Bend forward along the line of the main tape. Secure the folded fabric with a pin.

Again step back 2.5 cm and bend the ribbon forward and down. Bend back along the line of the main tape. We fix the bends with a pin.

In the same mode, step back 2.5 cm again, bend forward and then back, and fix with a pin.

For the fourth time, make a bend only vered. Then lift the bottom edge up and fix both edges with a pin.

Take a needle and thread. Sew with a basting stitch all the folds on the ribbon from the outside.

Pull the threads towards you, tie them and sew the bottom of the bud.

In this technique, make two more buds. In total, three kanzashi tulips should turn out: two bright red and one pale blue.

To decorate a boutonniere made of satin ribbons, sew or glue rhinestones into the middle of the buds.

Attach the buds over the green petal and lace pad.

Kanzashi boutonniere "Tulips" is ready! Wear with pleasure and receive well-deserved compliments from friends and acquaintances. Such compositions can be made for gifts on March 8, replacing them with fresh flowers.

If you liked this master class, liked it, make other decorations according to our instructions from.

Good day!

When a holiday approaches, we try to buy gifts for all our friends and relatives. These gifts can be different both in significance and value. It goes without saying that the most expensive things are given for the most significant events. But there are also those when a small DIY craft will come in handy, especially when they are made by children. One of the most common crafts is artificial flowers.

However, for any holiday, as a small souvenir, such a craft is suitable. In the last article, we This article will talk about the best options making paper flowers, namely tulips. By the way, some options can be safely done with children in kindergarten or elementary school!

So let's get started.

In order to get such tulips, you need to cook corrugated paper, a few sweets and wooden skewers.

First of all, insert the skewer into the candy wrapper and wrap it around the skewer with tape.

Now take one piece of paper and twist it like a bow.

After that, we put both halves together and stretching the paper, we make convex petals.

We take this petal and apply it to the flower blank. Attach with thread.

In the same way, we attach two or three more petals - depending on what kind of flower you want to make.

Now we cut leaves from green paper and attach one to each flower.

If the petals are made of paper different color, then you get a bouquet of multi-colored tulips.

That's all. Make bouquets and give them to mothers and grandmothers, friends and acquaintances.

Bouquet of tulips from foamiran step by step

Another material that is well suited for a tulip bouquet is foamiran. In addition, you will need items such as green teip tape, wire, glue, iron, knitting needle, spoon, scissors.

We start by cutting out the petals of the desired size from foamiran.

You can first draw a template and cut it out already. In order not to attach each petal separately later, you can immediately make three of them together.

To make the petals look a little natural, we tint them with pastels.

Now with the help of a spoon we give the petals a shape. We apply a petal to a heated iron, heat it, then put it on a spoon. As a result, it will turn out to be concave.

If you have triple petals, then each of them is heated and pressed into the desired shape.

Similarly, we make a tulip leaf, and draw veins on it with knitting needles.

Now we take the wire, wrap it with teip tape - we get the stem. We attach petals to it. First, glue the first row of three petals, then three more.

If you cut out three petals at once, then this is easier. Attach them to the wire, then lift them up, forming buds.

It remains to attach a leaf to each flower. As a result, we get such a wonderful bouquet.

How to make satin ribbon tulips

A small master class on how to make a bouquet of tulips and satin ribbons. It will turn out very nice. Such bouquets can decorate any festive table.

To make a flower you will need:

satin ribbon red or pink or yellow 2.5 cm.
glue,
scissors,
cotton buds
beads,
leg-split,
tweezers.

We make petals. We cut the tape into pieces 4 cm long. Round off the edges on one side and burn it.

From the other end, fold slightly and burn with fire or glue. For one flower, you need to make eight pieces of such petals.

Now let's move on to the stamens. You can take as a basis cotton swab and attach stamens to it. The stamens themselves can be made by attaching a bead to a thin wire. You can burn the twine.

The rest are attached to the second row.

It remains to make leaves. We take a green or yellow ribbon and cut it into pieces of 5 cm. Each piece is cut out in the shape of a leaf, and the edges are burned.

Watch a step-by-step video tutorial on how to simply make tulips from ribbons:

We got gorgeous flowers!

We make tulips with our own hands from fabric

To make a tulip from fabric, you need to have sewing skills, since in this case you will have to use a sewing machine.

To begin with, we prepare a pattern.

So, we take the material, here any will do, not even quite ordinary for a flower. We make three blanks for the bud.

We sew them together to make a bud.

Let's move on to the petals. We also cut out the pattern and sew the two parts together. So that the seams are not outside, turn the product inside out.

For the stems we take barbecue sticks. We coat a strip of green fabric with PVA glue and wrap the stick with it. In principle, you can use a thin pencil.

Now glue the flower to the stem.

It remains to take a leaf and wrapping the lower part around the stem, sew it.

That's all. The result is a flower.

Step-by-step origami schemes for making tulips

Making paper crafts or origami, creativity is interesting and exciting.

What is there, what is made from this common material. Making flowers is not exactly a complicated process.

The main thing is not to rush and do everything calmly. After all, this is a Japanese technique for making crafts, and it does not tolerate fuss. For you, we have prepared step-by-step instructions with diagrams (templates) for download, as well as a video tutorial on how to make tulips out of paper.

For crafts is taken square sheet paper and folded in half. After that, the triangle is bent on one side and unfolded, then the same on the other side. The result should be a triangle.

After that, it remains to collect the stem and put a bud on it. The diagram is shown below.

To make it more clear, this video shows the entire process of assembling a tulip according to the origami scheme.

Happy crafting to you!

Tulips from satin ribbons are bright and beautiful. Good afternoon dear friends and random visitors to our site. I hope that if you got to our site you will be satisfied and find the information you need. Today we will learn how to create tulips from satin ribbon. The author of this master class is Ekaterina Kravchenko. Tulips are spring flowers, which are very often created by craftsmen from different materials. Not given, I wrote an article on making a terry tulip from foamiran, if you are interested, you can see. And now we will consider with you a simple and interesting master class on making a tulip from a ribbon.

To make a tulip from a ribbon you will need:
* Satin ribbon in desired color.
* Scissors.
* Lighter.
* Thermal gun.

How to make a tulip from ribbon:
In this master class, we will make a bouquet of tulips, which means we will use 3 colors for making (yellow, red and purple). We take a 5 cm wide satin ribbon and cut it into 5 by 5 cm squares. Cut 9 pieces from the yellow satin ribbon. from red 6 pieces and from purple, too, 6 pieces. In total, squares for making tulips will turn out 21 pcs.

Take a square and fold it in half, as shown in the photo.

Then in half again.

And in half again.

Trim off some of the tape along the edge to even the edge.

That's the way.

We solder the edge with a candle or a lighter.

This is what the reverse side of the petal looks like.

We do everything exactly the same with other blanks. The petals are ready to be assembled.

Now we take a petal and apply glue along the very edge of the petal.

Glue the second petal to it.

Then the third.

The tulip bud is ready. But we will make a small bouquet of tulips, so we will make the same number of tulips in the same way.

Now let's make the leaves for the tulip. To do this, take a satin ribbon Green colour 2.5 cm wide and cut it into strips of 8 cm. For one bouquet, 21 blanks will be required.

Let's make a leaf. We fold our workpiece in half with the right side out.

Cut diagonally.

We melt the edge with a lighter or over a candle.

As a result, we should get such a leaf.

Apply glue to the base of the bud.

And insert the tulip into the leaf.

And in the same way we paste it into the second leaf, so that the leaves look in different directions, but not very far from each other.

We do this with all tulips. We make six tulips with two leaves and one tulip with three leaves.

We bend a little tails of six tulips that have two leaves.

We cut out a circle from a tape or felt about 4 cm and glue 6 tulips on it, which are with two leaves in a circle.

At the seventh bud we cut off the tail.

The second row we glue 6 leaves. Only now fold the segment with the front side inward.

It remains to paste 7 tulip buds in the middle.

This is what the reverse side looks like.

Satin ribbon tulips are ready.

From them you can make a beautiful headband, a brooch or just rubber bands for a child.

We thank the author for an interesting master class on making tulips from a satin ribbon and look forward to new interesting ideas.

And in conclusion, I suggest you watch another video master class on making a tulip from a ribbon.

Good needlewomen have long chosen to work with satin ribbons in various types of their creativity. And not in vain. Satin ribbon is bright in color, easy to use and is considered a strong, durable fabric. Today we will teach you how to make a tulip from a ribbon, which is equally well suited for a gift to loved ones, and as a decoration for your home. For ease of learning, photos of the process have been added to our master class. So let's get started.

Headband

To make such beauty, we need to have:

two satin ribbons two and a half wide;
a piece of ribbon six millimeters wide;
piece of felt;
hair band or headband;
lighter or candle;
cotton buds;
acrylic paints;
scissors.

The tape that we will use for the buds is cut into small strips four centimeters long. We will make each flower from twelve petals. So for five buds you need sixty segments.

The green ribbon is cut into twelve centimeters. From it we will form the petals of our bouquet. Eight pieces are enough for this craft.

We round off the raw edge of the future petal by cutting off the sharp corners.

Next, we carefully singe the rounded edge of the petal. Thanks to this, the petal will curl up a little and take on a “live” shape. In addition, a slightly singed edge will prevent the threads from shedding. Just do not overdo it, the black edge of the segment will not add beauty to the flower.

Even in such a simple job, you should not forget about safety precautions. To avoid burning yourself, use a metal clip or tweezers.

We clamp the second end of the part in the middle with a small fold, subject it to the same processing.

Here's what we got. Now the remaining segments of the tape need to be brought into the same form.

It's time for the leaves. Fold the green ribbon in half with the glossy side out.

Now we cut the part in such a way that we get a triangle, without one sharp corner.

Gently set the free edges on fire with a candle and glue them together so that a small hole is made at the bottom.

When all the petals and leaves are ready, we move on to the next step.

Our tulip needs a center that will play the role of a pestle. To do this, we will color one side of the cotton swab green.

We begin to form our flower. Using a gun or glue, we fasten three finished parts from a red ribbon onto a cotton swab in a circle.

Glue the next four petals with an overlap. The last five follow the same principle. We should get such a tulip:

Apply a little glue to the base of the bud and put a leaf on a cotton swab.

We shorten the cotton swab, and our flower is ready. To attach our bouquet to the hair strip, let's prepare the base.

We cut out a small rectangle from felt, as shown in the photo.

We alternately glue one tulip on this base, forming a bouquet. Additionally, you can add some free leaves to the edge.

From a narrow ribbon we make a bow, fasten it to the base of the bouquet. Also, if you wish, you can decorate the composition with rhinestones, beads, decorative buttons and other elements that you like.