The swan is a very graceful and beautiful bird. It is a symbol of fidelity, purity and faith! Such a wonderful bird can be easily made from paper with your own hands using the origami technique.

To easily create such a swan, you should read this master class.

Having prepared everything necessary materials, and this is just paper and a ruler, you can begin the process.

You need a sheet of paper, you can choose any shade or even use white. All sides of the leaf should be the same.

The sheet must be folded diagonally.

Then, along the main line, which is located in the center, fold the sheet in half and push through all the fold lines well. You will get such a preparation.

Having unfolded it, it is necessary to fold the other side of the rhombus in this way.

After, the tip folds in the other direction.

Fold the lines of the first and second fold so that another line forms between them.

After, the workpiece again folds in half.

It turned out a small tail of a swan, which needs to be slightly lifted and fixed.

The sides of the workpiece must be bent, equal to the main line.

With the help of a ruler, another fold line is made. Putting it on the upper point of the bend of the neck and the lower point of the tail, a fold is made without removing the ruler.

Do the same on the reverse side. You can label them if you wish.

Then, along these lines, fold the workpiece.

After, a neck bend is created. To do this, you need to fold part of the workpiece in this way, equaling the line of the wings.

Then, along the lines obtained, the neck is folded.

After again in half.

Then continue to work on creating the bend of the neck. Not far from the previous fold, you need to make two more, on each side, according to the same principle as the first.

It turned out such a preparation.

Only a few finishing touches remain. Give the swan's beak the necessary shape.

And also spread the wings a little, making it a little voluminous.

Paper swan, ready!

The final look of the craft. Photo 1.

The final look of the craft. Photo 2.

The final look of the craft. Photo 3.

The whole process of creating a swan is very exciting, at the end of which you get a pretty funny craft!

Origami crafts are gaining more and more popularity. Particularly beautiful are three-dimensional models, for example, the figure of a swan.

Involve children in the manufacture of the swan figurine. Working together not only strengthens the family, but also develops fine motor skills hands, and also affects the development figurative thinking contributes to the development of speech.

To create an origami swan, prepare sheets of white, orange and red paper. Arrange pre-prepared modules in different packages for convenience. You will also need stationery scissors, a black marker and PVA glue.

The process of creating a swan from modules is divided into several stages.

Focusing on the photo below, it is necessary to glue the main details for the future figure.

By assembling and gluing 25 prefabricated models, you will prepare the basis of the craft. The correct placement of parts is shown below.

Glue the extreme modules so that you end up with an even circle. The base for the figure is ready.

On the finished bottom of the figure, you need to build up a few more rows, it is enough to reach five layers.

So you should get out volumetric figure"salad bowl". Directly depends on the accuracy and accuracy of movements appearance toys, do not let yourself be rushed when working.

The next step is to create the wings of the swan.

On one side of the finished structure, put on the orange module in sequence, then 9 pcs. white and final, orange again.

Lay out each next layer with a reduction of 1 pc. the number of white parts until 1 orange module remains. Layer 2 will consist of two orange and 8 white parts and so on.

Assemble both wings.

The final step is to create the neck of the swan. To do this, grow 2 white modules in place between the wings, and place 1 orange module between them.

There should be 12 such layers, and make the next 12 layers exclusively from white modules.

Attach the red module to the very top of the neck - you get the beak of a swan. And mark the eyes of the bird with a marker.

Original creative gift handmade will not leave anyone indifferent. It will decorate any interior. If you made the craft with the children, do not forget to praise them, and place the figure on the children's exhibition.

The final look of the craft.

Please also pay attention to simple and interesting master class which clearly demonstrates how to make do-it-yourself paper claws. This craft is great for kids fun!

The swan is a noble and very elegant bird, a symbol of eternal love. That is why crafts in the shape of this beautiful bird are so popular among needlework masters. In hotels, towels are laid out in the form of swans, especially for couples in love or newlyweds. At weddings, the cake is decorated with figurines of these birds. At solemn feasts, you can often find serving dishes with napkins folded in the form of a swan.

Consider also step by step assembly paper origami swan. There are several options for folding the sheet according to the schemes. Now figures from modules are popular. Such origami is a rather laborious process that requires preliminary preparation. In the article, we will help readers understand all the intricacies of the step-by-step assembly of an origami paper swan.

Step-by-step instructions given for each option for making crafts will help you do the job faster and better. Let's start with simple origami from a sheet of paper or napkins. Then we move on to working on a modular origami of many elements. The presented schemes will help to correctly and consistently manipulate the details, stack the elements in such a way that the bird turns out to be spectacular.

How to work according to the scheme

A step-by-step assembly of an origami paper swan is easier to do if you follow the drawn sheet folding pattern. You need a square dense sheet paper. It can be done with a ruler and simple pencil, making measurements of the sides, and then cut out the desired shape along the contours. It is convenient to make a square from sheet A-4 by bending one of the corners to the opposite side. Adjacent sides must match. Cut off the extra rectangle with scissors and unfold the workpiece. There will be a square in front of you. Now you can proceed to the further implementation of the origami paper swan. Follow the step-by-step steps for the diagram below in the article.

The sequence of folds is made, looking at the drawings from left to right and from top to bottom. At the end of all the manipulations, you should get a swan figurine.

Completing of the work

Let's take a closer look at how to make a step-by-step paper origami swan assembly. Fold the square blank in half diagonally. Then bend the resulting triangles inward in the same way. It is necessary that the sides converge along the center line of the workpiece.

Bend the outermost corners outward. Try to keep them the same size. Then flip the piece over and fold it in half. The dotted line in figure No. 6 indicates the paper fold line to form the swan's neck. The sharp corner in front turns vertically upwards. And the very edge of the triangle is bent forward. This will be the bird's head. To get a beak, you need to make two more small bends on the head. This is clearly seen in the figure above.

The tail part is also formed by two successive folds of paper along the dotted lines on the back of the bird. You can add crafts by gluing eyes on both sides.

Napkin Origami

Similarly, a beautiful bird can be made from white thick napkins. We will not repeat the step-by-step assembly of an origami swan from paper, since readers have already understood in detail the sequence of work.

We only add that after the figure has turned out of paper, you need to fluff all the layers on the tail with gentle movements. Since the napkin is made up of several layers, the tail will turn out fluffy. The lower part needs to be slightly pressed down so that the bottom is flatter and confidently holds the craft in a vertical position.

Swan from modules

Modular origami is a little different from simple paper folding according to patterns. Here, the assembly process is carried out by composing a whole object, in our case, a swan figurine, from individual small items. A module is a small but finished piece, also assembled according to a simple origami scheme.

A step-by-step assembly of origami paper swan modules involves a lot of preliminary work. After all, such a figurine, as in the photo above, consists of 180 - 300 parts, depending on the size of the bird and the shape of the wings. On the craft, you can make one lift of parts up in the tail area, as in the sample, however, there are options with two small wings and a tail at the back. The figurine can be made from huge spread wings with flight feathers on the sides.

You can also diversify the craft with colored modules. In the photo, a step-by-step paper origami assembly of a swan is made mainly of white components. The bird's beak is highlighted only by the red module. You can make a swan black or bright, made up of multi-colored details. It is often installed on a beautiful pedestal, assembled separately. There are quite a few options for making such crafts. Experienced craftsmen make a whole sculpture for the wedding ceremony, where two swans with open wings seem to be flying towards each other. There are works for the exhibition, where a fabulous swan princess with a crown on her head was made.

Since our article is designed for beginners, it will be further given detailed instructions a step-by-step assembly of an origami paper swan, which you can see in the photo above.

In stationery or craft stores, you can find whole sets of ready-made modules with assembly diagrams for different figures. You can, if you wish, first learn how to fold large objects from ready-made parts in order to have an idea of ​​\u200b\u200bthis kind of work. If you want to learn how to make them yourself right away, then buy special paper for modular modeling. Of course, you can start working with plain A-4 white printer paper, but then the modules will turn out to be thin and flat, you will need much more details, as well as the time spent.

Before you make an origami swan, you should purchase special paper for modular origami, then it has a high density and the elements will turn out to be voluminous. Thus, the details will go to the figure much less.

If you are going to create a craft for an exhibition and it will need to be moved from place to place, then the craftsmen advise using PVA glue when assembling. Although it is believed that the sheets are held in place by friction, the structure may crumble when carried. Make a figurine for yourself for the first time, try your hand at step by step assembly simple option origami paper swan.

How to fold origami modules

From a sheet of A4 paper, you need to get 32 ​​identical rectangles by folding. You can draw a sheet using a ruler and a simple pencil. Each module will be 37x53 mm in size. Then cut the paper along the folds. If there are no scissors, then you can carefully tear it under the ruler. The photo below shows that when the models are folded, the uneven edges are hidden inside and are completely invisible from the outside.

• Fold the workpiece in half horizontally, and then again to make a quarter. Then unfold the paper to the folded portion in half. This is done in order to determine the center fold line.
• Then you need to lower both sides down so that they meet along the fold line. You will get a triangle with hanging extra edges.
• On these parts, bend the most extreme corners up on both sides.
• Lift any layers of paper hanging below the triangles up and smooth the fold with your fingers.
• It remains to fold the triangle in half along the center line so that it remains smooth on the outside.

When you have prepared a lot of details in this way, you can begin to assemble the paper origami swan step by step.

How to connect triangular modules to each other

The module consists of two right triangles connected in the center. On the back of the fold there are holes, the so-called pockets, where, in fact, the parts are inserted during assembly.

The main skill when working with origami modules is to connect them together. There are several mounting options. The first of them is used most often when one corner of the module is inserted into the pocket of the other, and the second module is attached to the remaining hole on the opposite side. This method is shown in the figure below.

With this method of constructing an object, an increase in the figure is obtained. But sometimes you need to reduce it or make a long chain. Then one module is inserted immediately into two pockets of the previous element. The extreme details at the end of the row are hidden in the holes with only one corner. The second one is free.

How to make a swan body

Start the step-by-step assembly of the paper origami swan from a small circle. According to the method described above, insert the corners of the other two into one module. The next one is attached on the side to the corner of the second module. Do the same on the other side. It turns out an increase in the length of the craft, which is performed immediately in two rows. A long chain is assembled in this way, which can be reinforced with another row of modules on top. Gently bend the workpiece into a circle. If the edges still do not converge, then add a few more details. At the end, connect the first and last together. With your hands, turn the corners up, slightly pressing the craft from all sides inward.

Continue to increase the number of rows, putting on all the new modules in a circle, until you reach the desired height of the body of the swan.

Calculation for further work

Count the total number of modules that you got in a circle. Leave 3 modules to form the bird's neck, then calculate the remaining amount in such a way that 7 modules for the tail remain in the center back. From the rest of the details, wings will be laid out on one side and on the other.

But you need to calculate the craft, depending on its shape. If you will make a swan only with a tail increase in the number of models, as in the photo in the article earlier, then leave only the modules for the neck free. Then start increasing the rows. Calculate the work in such a way that in each row you need to reduce the number of modules by one on both sides. At the end, only one element should remain on the tail. If this does not work, then add an extra detail to the neck.

How to make two wings

In the photo below, you can see that the body of the swan continues with two wings. Do this on both sides at the same time. On the extreme modules, one outer corner remains free. The reduction is done on both sides of each wing until one module remains on top.

Give the craft with your hands oval shape, slightly pressing the upper parts of the wings inward.

neck assembly

As we mentioned earlier in the article, modules can be assembled in different ways. To assemble a long chain to make a curved swan neck, you need to insert the next module into two pockets of the previous one at once.

The photo above shows that a long stick is obtained. Pull the modules tightly against each other, inserting deeply with pressure. This is necessary so that later the neck can be beautifully arched, tilting his head down. If the elements are not tightly inserted, then the neck will fall apart into separate parts during this procedure.

At the end of the workpiece, put on either only the red beak, or first put on a black model that outlines the line of the eyes and separates the neck from the beak, and then strengthen the red one.

Assembly of parts in stages

How to make an origami swan out of paper, you already understood. It remains to collect all the details together. On the models left for the neck, strengthen the made part and beautifully bend the necks forward. Behind between the wings left 7 modules to raise the tail.

They make it according to the principle of wings, reducing the number of modules on each side by one. So, in the first row there will already be 5 of them, in the next - 3, at the end there will be one detail on the tail.

beautiful colored swan

The swan assembled from multi-colored models in layers in rows looks impressive. The photo below shows that their combination resembles the colors of the rainbow. Below is a bright stand made of two circles. They are made in the same way as the neck of a swan, only at the end they are bent in a circle. With a stand, the swan looks complete and stands upright more confidently.

The article provides detailed instructions for assembling a swan figurine. We hope that the recommendations will help make crafts for beginners easier. Good luck!

The swan is a beautiful bird, how often do you see crafts made in this form? What can you make an ordinary swan for children from? The answer is simple, almost anything. Similar crafts decorate many summer cottages, stand in parks, and what aesthetic satisfaction you get by making such a paper swan. Moreover, in the case of origami, such work perfectly develops fine motor skills of the hands.

But you can show your imagination and make such a craft out of almost anything! I think everyone has seen swans from ordinary car tires and you know that a job well done looks very impressive, but rubber is not the only thing you can make a beautiful craft from.

So what's stopping us from learning the same way? Nothing, now you will learn how to turn improvised material into beautiful birds and you will be able to give a master class on how to make a similar swan craft with your own hands to your friends and acquaintances.

Making modular origami

This type of origami is very difficult, it requires diligence and painstaking work. You will have to make many parts out of paper, and then connect them by nesting one into the other, which is why this technique is called modular. However, the result fully justifies all these difficulties. Even the creation process itself is so captivating that you will not notice how time has flown by. However, let's get started.

Actually modules

The first thing you should do is learn how to make modules. To do this, take the A4 format, cut into thirty-two equal parts of a rectangular shape. Made? Great, now we fold each resulting rectangle in half, lengthwise and across.

Now we wrap the edges to the center, turn the resulting product over. You should have a small distance between the corner that you wrapped and the triangle.

We collect crafts

To begin with, we need a sufficient number of elements of various colors, and we need these: 1 red, 136 pink, 90 orange, 60 yellow, 78 green, 39 blue, 36 blue, 19 purple.

We proceed directly to needlework, take three pink elements and place the tips of the other two in the pockets of one of them.

Next, we take two more modules of the same color and attach them to the previous formation by analogy, the tips in the pockets. We continue to do this until we get a ring with an outer and inner row, thirty modules each. In fact, first you get a chain, the ends of which you connect with the last module.

The next, third, row we make already from thirty elements orange color to be connected in a checkerboard pattern. Similarly, collect the fourth and fifth rows.

The next step, carefully turn the edges of the craft up. Next, we take thirty elements and lay out the sixth row by putting them on top.

And now comes the crucial moment, we make the neck and wings. First, choose where to place the head. We chose, we take two adjacent corners of the elements, here we will make the neck. To the left and right of the head we form layers of twelve modules yellow color. As a result, we get twenty-four elements in the seventh row.

We make wings by reducing the number of elements in the next row. We reduce by two, that is, in the eighth row you will have twenty-two modules, in the ninth already twenty.

Next in line is the tail, it is made by analogy with the wings, only we reduce one module at a time. This part will take twelve green and three blue elements.

The neck is made quite simply, we take one module and insert it into the pockets of another, that's all. It remains only to insert seven purple and 6 elements of blue, blue, yellow, green into the red module. We form the neck and attach to the body between the wings.

The last thing to do is the base of the bird. It will consist of two rings, in the first there are thirty-six modules, in the second forty. We connect them by analogy with the neck.

Our beautiful bird is ready, you can put it in the living room or your room. She will delight your eyes for a long time.

Classic origami swan

Next, we will analyze step by step instructions how to make a much simpler and more understandable swan, which can be created from such an improvised material as paper, but from that it will be no less beautiful.

Maybe someone will like it even more than our previous version. All you need is a piece of paper and a pair of your wonderful hands. Let's not make long prefaces, let's get started.

The first thing you do is take a paper square sheet and carefully fold it diagonally and unfold it. Next, bend the sheet on one side so that the corners meet in the middle, as if you are making an airplane. Now you need to slightly bend the corners, which are connected in the center, to an equal distance.

The next step is to turn our craft over and bend it. You should get a certain triangle, something similar to an airplane.

We take the nose of the “airplane” and bend it up in a place that cuts off about one third of the nose of our craft. And finally, we bend the tip a little to make a beak.

Our beautiful bird is ready. The swan is a very complex figure and it may happen that you do not quite understand the manufacturing process. To do this, below we attach a photo instruction for making a swan craft.

Photo crafts swans

Swans are beautiful birds, they are incredibly graceful, this refined long neck has snow-white feathers. Probably each of us admired them on a pond or in a zoo, these birds are incredible, it is a pleasure to watch how a large noble swan slowly cuts through the water surface. FROM early childhood we heard about these majestic birds, how many songs, stories have been written about swan fidelity.

A little about swan fidelity

A couple of years ago, an incredible story happened in France with a pair of beautiful swans that lived on a pond near the Bois de Boulogne. As we know, swans are birds with a huge soul and a kind, sensitive heart; they choose a mate for themselves once and for life.
And then one day a misfortune befell the couple. One of the swans (a female) almost died, and all because of female curiosity. She swallowed a shiny fishing tackle and it got stuck in her stomach. The husband of the swan was not taken aback, he began to call for help. The fearless bird began to scream, to attract the attention of people, he threw himself at the feet of passers-by, asking for help.

Fortunately, a policeman passed by that day, he did not ignore the bird's plea. I followed the swan and when I saw the already exhausted female, I quickly realized what the problem was. The policeman took both birds to the veterinarian, on the way the swan no longer screamed, he understood that people would help his wife. This story ended well, the bird was rescued, the ill-fated fishing tackle was pulled out of the stomach. And the story of these faithful loving birds will live forever.

In our article we will tell you how to make a do-it-yourself swan out of paper. We'll consider different techniques from quick and easy crafts to more complex modular techniques.

Simple paper swan

The scheme of this craft is very simple, all we need is one square sheet of paper. So, let's begin!

1. Bend your leaf in half so we know where the middle is.
2. Lay the sheet at an acute angle towards you so that there is a diamond in front of you. Bend the top and bottom of the rhombus towards the middle, as shown in Figure 2.
3. Bend up the corners of the resulting figure (Fig. 3).
4. Bend the figure in half (Fig. 4)
5. Now let's make the swan's neck. Bend up the left acute corner of the triangle (Fig. 5);
6. Let's make a head, bend down, the upper sharp corner (Fig. 6);
7. It remains to do a few little things. Make a small beak and tail (Fig. 7).
8. Ready!

How to make a swan from modules?

The modular origami technique is very interesting and unusual, from the modules you can assemble not only a swan, but anything you have enough imagination and inspiration for. The Chinese were the first to use this origami technique and then it came to us.

All you need to learn is how to make one module and understand the technique of assembling the figurine. If this direction of origami is not familiar to you, you can start with a swan. Having made it, you can easily apply the acquired knowledge in the manufacture of other figures.

How to make one module

Well, first, let's figure out how to make a module. We will fold the module from a small rectangle 37 × 53 mm or 53 × 74 mm. You don't need to measure in millimetres. You can just take an A4 sheet and fold it as shown in the diagram, so you quickly get a lot of rectangles, and do not spend a lot of time measuring. You can also use square leaves for notes that are sold in any stationery store.

Let's figure out how to make one module

Let's get to work

1. Fold the rectangle in half;
2. To find out where the middle is, fold the resulting figure in two, as shown in Fig. 2;
3. Bend the upper right and upper left corner of the rectangle to the center to make a triangle (Fig. 3);
4. Turn your figure over (fig. 4);
5. Fold the lower right corner of the protruding figure up, do the same with the lower left corner (Fig. 5);
6. Now fold up the entire protruding part (Fig. 6);
7. Bend the figure in half, connect the right corner with the left one, without turning the figure over (Fig. 7);
8. You have a module ready.

Now let's start assembling the swan

To create a colored swan, we need a lot of modules of different colors.

• 1 - bright red;
• 13 - pink;
• 90 - orange;
• 60 - yellow;
• 78 - green;
• 39 - blue;
• 36 - blue;
• 19 - purple.

When all the modules are ready, we proceed to assemble paper crafts

Let's get to work

1. Let's figure out how to fasten the modules without glue. Take two modules, place them side by side with sharp corners at the top (Figure 9);
2. Take the third module with a sharp downward angle (Fig. 10);
3. The module has pockets, insert the corners of the modules into the pockets (Fig. 11);
4. Continue connecting modules. bottom row should consist of 30 modules (Fig. 12);
5. Continue to collect the figure, each row should consist of 30 modules (Fig. 13,14,15);
6. Now we need to flip the shape and make it more voluminous. We slightly level our figure with our hands so that a bowl forms (Fig. 16);
7. We continue to collect the figure, add new colors, each row still consists of 30 modules (Fig. 17.18);
8. Starting from the seventh row, we begin to make the wings of a swan. We need to choose a place where the neck and tail will be. We skip one pair of corners, they should be from two neighboring modules. Now add 12 modules on one side from the neck and on the other, in total there should be 24 modules in the seventh row. At the back, free space should also form; this will be the tail (Fig. 19);
9. Continue to collect the wings of the swan, leaving 1 free corner on each side. Then each row will be reduced by 1 module (Fig. 20,21,22,23);
10. Gradually, you will assemble the wings, removing 1 module. Now we will make a small tail, according to the same principle as the wings (Fig. 24);
11. Now we make an elegant swan neck, just put on the modules one by one (Fig. 25,26,27);
12. By the same principle, we will make a stand from a larger circle and a smaller circle. There are 40 modules in a large circle, 36 in a small one (Fig. 28);
13. Ready!).

More examples of how to make a paper swan

Making origami is very interesting and easy. To create fascinating paper figures, you need to be patient and perseverant, because this is a very delicate and painstaking work. To do everything accurately and accurately, it is important to follow the instructions. There are many schemes and options for the execution of various animals, plants and other crafts, each of which will decorate your home. Today we will tell you how to make a double swan with your own hands.

Necessary materials

To create the base of the swan, you only need landscape sheets. You can also prepare a few pieces of colored paper for decoration. finished product. And, of course, you can not do without scissors.

Important information: Sheets must be of standard density and A4 format, since origami may not work when using other material.

To assemble the swan, we need to prepare many small components. They are also called modules.

What is modular origami?

Modular origami is a unique method of creating three-dimensional objects. For the first time this style appeared in China and became the main one when assembling various figurines from huge amount identical parts. They are different types, but most often used are classic, triangular. For a double swan, these are exactly what you need. They are made according to a certain technology, which allows you to connect finished parts by investing one into another. As a result, the force of friction will hold them together and the models will not fall apart. The design will be strong, but, at the same time, will remain flexible and resilient.

In order to make a classic triangular module, you need to cut the landscape sheet into 32 identical parts. This is not at all difficult to do, just bend the sheet in half 5 times in a row and cut it along the fold line with scissors or a clerical knife. Now that the "material" is prepared, we can start making the model.

There is nothing complicated in the design of modules. Therefore, let's start making our swan. This is what you should end up with:

End result, origami swan

And this is what the material from which it will be performed looks like:

Material required for work

In order to make such an impressive mountain of blanks, you need a lot of material. It takes about 5-7 hours to create modules. If there are assistants, introduce them to work - together it is more fun and faster.

As you can see in the photo, we need to prepare a lot of modular parts, approximately 1.5 thousand. If you plan to make the swan one-color, use only one paper. But you can create an unusual multi-colored or bright swan - for this you need to buy multi-colored A4 sheets in advance. In our version, 1322 white and 180 pink modules were used.

When you make the blanks, you can proceed to the main part of the work - assembly.

Video. How to make an origami module?

Step-by-step instructions for performing a double swan

We offer you a clear step-by-step instruction for assembling a double swan from the prepared material:

1. We combine several modules in this way.

   
   Step 1

2. Then we connect 60 modules (in 2 rows of 30 pieces each) in a circle so that it turns out as in the figure.

   
   Step 2

3. We do the following steps in the same way. We already have 5 rows ready.

   
   Step 3

4. We have reached 10 rows. Keep in mind that during work you need to slightly bend the workpiece inward - this way you will make it more slender.

   
   Step 4

5. Lay out 5 more rows. Do not forget to bend and tighten the workpiece so that our swan turns out to be beautiful and voluminous.

   
   Step 5

6. Now, when 15 rows have already been collected, let's start creating the neck, tail and wings. For the neck, set aside 6 modules, for the tail - 4, and for the wings - 10 each.

   
   Step 6

7. Let's start creating the neck.

   
   Step 7

8. Now we collect the tail. It should be located strictly opposite the neck.

   
   Step 8

9. Collecting wings. For the first row of each wing, we need 10 modules.

   
   Step 9

10. Let's move on to the second row. From the side of the tail, you need to put on the module, as shown in the figure.

    
    Step 10

11. We continue to work on the wings. We put on the next rows the same number of modules as in the previous row.

    
    Step 11

12. Gradually we collect the wings of our double swan from 10 rows. It is important to assemble both wings at the same time, keeping the same height in each part on different parts.

    
    Step 12

13. When 10 rows are lined up, for each subsequent row we use 1 less part.

    
    Step 13

14. In the end, you should end up with something like this. You will spend 770 modules on it. Most of the work has been done.

    
    Step 14

15. In order for the resulting structure to be stable, it is necessary to create a stand. Lubricate the modules with glue and fix them. Try to do it evenly so that the craft has a reliable support.

    
    Step 15

16. When the first row is dry, start gluing the second.

    
    Step 16

17. Let's move on to the next component of our craft - the inner wings. We do everything according to a well-established scheme, only we lay out 20 modules in each row.

    
    Step 17

18. Make 7 rows. Do not forget to stretch the workpiece from time to time.

    
    Step 18

19. Raise the wings. Select 10 modules for each side.

    
    Step 19

20. Gather 3 rows as shown in the picture.

    
    Step 20

21. When you get to this stage, reduce the number of modules by 1 in each subsequent row.

    
    Step 21

22. When you're done, you should have these wonderful wings.

    
    Step 22

23. Let's start working on the third component. We work according to the same scheme, but we introduce 2 more additional modules. Now there should be 12.

    
    Step 23

24. We raise the design to 6 rows.