Headband with roses from ribbons. We make a bezel of roses with our own hands. A variant of making a headband with delicate foamiran roses

A headband with Kanzashi flowers will decorate loose hair for a holiday, and is also suitable for wearing in everyday life. You can create such a headband in any color that matches the palette of your outfits.

For creativity you will need:

satin ribbon 4 or 5 cm wide for a large rose, ribbon length 60-70 cm
satin ribbon 2.5 cm wide for a small rose, ribbon length 40 cm

It is better to use "hot" glue, it is transparent, so it does not stain the product and perfectly fixes the details.

three pieces of ribbon 16 cm long, but of different widths and matching in color (to create a bow)
openwork ribbon, 80 cm or lace
fabric circle (diameter 8 cm)
bezel
decorating elements (rhinestones, beads)

Let's start our master class on decorating the Kanzashi headband by creating the basis for flower arrangement. To do this, cut a circle with a diameter of 8 cm from the fabric and singe the edges. Heat up the glue and start gluing openwork border folds.

Make folds every 1 cm. Put the last fold on the first and carefully glue it.

Constantly bend the edge of the tape away from you and fix the layers with glue. Try to make the petals in the same plane.

Turn the rose over and cut off any excess. Be sure to immediately singe the place of the cut with a lighter.

Squeeze enough glue on the back of the rose and immediately glue to the base, placing the rose on 1/3 of the composition.

Twist a small rose from a thin ribbon in the same way.

Don't forget about color contrast! If you make roses from adjacent flowers, then the rim will turn out pale and dull.

Glue the rose to the base so that the edge of the small rose rests slightly on the edge of the large flower.

To form a bow, pick up 3 strips of different colors and widths. Scorch the edges of the two with a lighter so that they stick together. Lay one thin ribbon in the middle of the wide one.

Connect the two ends and press them to the middle - then you get a bow. Secure it with thread.

Glue the bow to the base in an empty place so that its edges "lean" a little on the roses.

Start decorating the composition. To do this, use rhinestones or choose the tops from holiday hairpins. Fix the decoration elements on the bow and on the roses.

Such an unusual decoration can be created by one's own efforts only armed with necessary material and, of course, patience. This headband can be presented to a friend, worn with a bright summer dress, make it for daughter.
So, we need:

1. Satin ribbon different colors and different widths.
2. Scissors
3. Matches or lighter (for melting the edges of the tape)
4. Glue.
5. Bezel.

You can start.

First, let's prepare roses for our rim. This can be done in different ways. I'll tell you about myself easy way.
1. Using only tape, glue and your own sleight of hand. At first, the ribbon may unravel several times, turning from a twisted rosette into the same ribbon.
To prevent this from happening, it is better to take a rigid tape.

start twisting the edge of the tape
Looks like this:

This is the middle of our flower
We take and bend the tape
It turned out such a corner
We twist it around the circumference of the middle

Again we bend the tape and press it from below and so on until the rose "blooms", this is the wrong side - we melt the edge of the satin ribbon and glue it. It " front side»Let's align the flower with our hands, spreading the petals.

2. We tightly wrap a green satin ribbon around the rim.

She will hold roses and at the same time be the background, creating the effect of leaves. Now we sew roses to the wound ribbon.

You can create roses of different sizes and sew them in several rows - large, small, or make roses of the same size and sew them in one row, creating a thin rim. It all depends on your taste, the length of the hair on which the headband will "sit". I made one row of flowers, diluting it with larger roses in places.

An elegant and delicate headband decorated with roses will allow you to make female image more romantic. In the master class below, we will show you how to make such an ornament. DIY rose headbands are very easy to make. The item is decorated with 19 roses and a satin ribbon braid. Consider how to make such an ornament and what you need to make it.

What do you need for a headband with roses?

To decorate the rim you need to purchase:

pieces of satin ribbon of light and dark green color (width 6 mm, length 2 m);
bezel (plastic or metal) with teeth (width 2-3 cm);
pink ribbon (width 2.5 cm - 8 m);
green satin ribbon ((width 2.5 cm - 2 m);
device for burning wood;
thermal gun.

We braid the bezel with a pigtail

At the ends of two satin green ribbons, we form loops with glue. The width of the loop should be such that another tape can easily enter it and you can weave a pigtail. We insert one tape into the loop of the second.
Further, at the very fastening of these two blanks, we bend the tape and insert it into a free loop, slightly stretching the tip.
Thus, we continue chess weaving, alternating dark and light ribbons.
When a pigtail of sufficient length is ready, last loop we insert the opposite tape, while not forming a new loop.

Creating roses

To create roses, cut off from a pink ribbon, the width of which is 2.5 cm, 133 pieces (length 6 cm). One rosette - 7 petals.
In order to get petals from segments of the tape, we bend the side upper corners of the rectangles down, placing them horizontally. The result is triangles, they should be located on the front side, and the middle - on the wrong side.
Further, in the resulting blanks, we bend the sharp corners vertically, making sure that the ends are docked with the place where the corners of the rectangle are attached. Thus, we prepare all segments of the pink satin ribbon.
We twist the first petal into a tube and glue it, forming the middle of the bud.
On the resulting middle tube, we glue the remaining six petals in turn, forming a rose.
We form the required number of buds.
Next, we prepare 19 segments of a green ribbon 2.5 cm wide. For sepals, their length is 10 cm. We bend each segment in half and pass the tip of the heated burner diagonally. We divide into two right-angled triangles each in half a bent tape.
For the sepals, we will use the part of the ribbon where the fold was. We will open the resulting corner, its shape should be in the form of a paper bag for sweets.
We make 19 green blanks, the number of buds will be the same.
We place the roses in the opened green petals, having previously dripped glue on them.
We glue the pigtail on the rim.
After the glue has dried and the pigtail is firmly attached to the rim, we glue our roses on the pigtail, arranging the details in a herringbone pattern.
We place all the details on the rim. If you want the bouquet to be denser, increase the number of roses to 21 pieces.

Our beautiful, romantic hairband with delicate roses is ready. It is not difficult to make it. All you need is a headband, roses, ribbons and a little patience.

A variant of making a headband with delicate foamiran roses

Foamiran is artificial material, it is also called plastic suede. This material is used for various decorations. You can buy it in specialized stores for needlework and in online stores. So, let's look at how to make such a bezel with roses with your own hands.

What will be needed?

Materials and tools needed to make a headband with foamiran roses:

foamiran green;
lighter;
foamiran dark and light;
wet wipes;
foil;
glue gun;
sharp scissors;
40 cm lace and thick fabric;
bezel 2-3 cm wide.

Making a bezel

Before you start making a headband with roses from foamiran, consider some tips:

Initially, you need to draw flower patterns. The basis for the roses will be a narrowed oval (size 14 by 5.5 cm). Petals of two sizes will be needed. You will get three petals together in a circle with a diameter of 8 cm - 9 pieces, with a diameter of 6.5 cm - 10 pieces. You also need 8 petals in the form of a drop (3 x 3 cm).
Next, you need to make 8 leaves in the shape of a boat 4.5 by 2.5 cm and sepals in two sizes - 5 and 7 cm.

Now let's move on to making flowers.

From dense fabric we cut out two identical ovals. On one of them we make notches to put it on the rim. Glue the second oval to the bottom of the rim, thereby covering the bottom.
Next, cut out the blanks from foamiran according to the templates. One large flower needs three petals, and for small roses we will take two. In buds, two blanks are needed.
Cut out the sepals according to the pattern.
We tint the petals with the help of pastels. The sepals are tinted with pastel blue or any other color.
To give the sepals and petals a natural shape, you need to twist and stretch each of them, then make a groove on all the petals thumbs hands
We twist foil balls, about the size of a pea, to make centers for roses
Now we collect first large roses, then small ones. We glue the petals sequentially with a glue gun.
When both the buds and roses are collected, we stick them on the rim, on the fabric base, which we previously prepared. Glue lace along the edge of the base. We arrange the roses the way you like, including fantasy.

The headband with roses is ready. Using your imagination, a little time and desire, you can get an original and delicate jewelry that you can complement your image with or give to your daughter or girlfriend.

Foamiran is an innovative artificial material, which is also called plastic suede. It is used for various decorations and, in particular, for headbands.

Due to their properties, needlewomen can create different things. Namely: decorative crafts, jewelry, dolls and more. In this article, we will talk about hair bands, which are decorated with incredibly beautiful flowers made of foamiran. Several master classes will be presented, one of which will appeal to a skilled craftswoman.

In order to make a headband with foamiran flowers, you need to prepare the following materials and tools:

Plastic suede dark and light;
Foamiran green;
Lighter;
Pastel dry red and blue;
Wet wipes;
Glue gun;
Foil;
Scissors;
Thick fabric;
40cm lace;
Headband.

A master class on making an original head ornament is not difficult.

It looks like this:

The first step is to draw patterns. The base of the flowers should resemble a narrowed oval measuring 14 by 5.5 cm. For roses, petals of 2 sizes will be needed. They look like 3 petals together but in a circle. Diameter 8 cm - 9 pieces, 6.5 cm - 10 pieces. You will also need 8 teardrop-shaped petals, the size of which is 3 by 3 cm.
The leaves of the flowers will have the shape of a boat 4.5 by 2.5 cm. The leaves must be made 8 pieces. Sepals must be made in 2 sizes - 7 cm and 5 cm.
You have to start from the basics. From dense fabric it is necessary to cut 2 identical ovals. On one oval, you need to make notches to put it on the rim. The second oval should cover the lower part by gluing it.
Next, from the foamiran, it is necessary to cut out the blank templates. For 1 large flower, 3 petals are needed, and for small roses, 2 will be taken. But in buds, 2 blanks are needed.
Then, also according to the template, you need to cut the sepals.
The next step is to use pastels to tone the petals. The sepals are also tinted, but only with blue pastel.
Now we need to give the petals a natural shape. Each must be twisted and stretched, and then make a recess with the thumbs. The same must be done with the sepals.
The centers for roses are made of foil. You have to roll the balls.
Next, you need to collect first large roses, then small ones. All petals are glued sequentially with a glue gun.
After the buds and roses are collected, they must be glued to the rim, to the fabric base. Lace should be glued along the edge of the base. Roses should be arranged as you like.

That's a little time, effort and desire, and you can get original decoration, which can be presented to a daughter or girlfriend.

How to make small foamiran roses for the rim yourself

You can make small foamiran roses with your own hands, they will decorate the rim, and it, in turn, will complement a beautiful outfit.

To make a headband, you need to prepare:

Foamiran green and orange;
headband;
Glue gun;
Scissors;
Lighter;
Satin ribbon 1x40 cm;
Lace;
Thick fabric;
Foil;
Toothpicks.

The first step is to draw templates. Roses will be 6 - 3 large and 3 small, a few buds. Each rose has 3 petals. One blank looks like a pyramid of 3 balls, 5.5 cm in diameter, small - 5 cm. Such petals will need 12 of each size.

It is necessary to make substrates 5 cm in size and 6 pieces in the shape of an uneven star. The base must be made of dense fabric, in the form of an oval, as in the previous master class. Next, you need to prepare the rim. First of all, we wrap it with a satin ribbon at an angle, but not the entire rim, but 2/3 of the part. Then you need to fix the base, and attach lace along the edge of the rim. The petals are made from orange foamiran, and the substrate from green.

Small buds will be made from the remnants of plastic suede.

The next step is to give the petals a natural shape, this is done by twisting, squeezing and stretching. The edge is tinted and heated with a lighter, so it will twist, and the petals will look more alive. When the sepals and petals are ready, they must be collected into roses. We make the middle of the foil, it is necessary to twist the ball. Finished roses must be fixed to the base. The elegant bezel is ready.

We make a bezel from foamiran for roses: little tricks

Winter is the perfect time to get creative.

To make a headband with roses, you need to prepare:

Cardboard;
Foamiran pink or peach;
Foamiran green;
Art pastel Pink colour;
Water;
Sponge;
Iron;
Thick fabric;
Lace;
Glue gun;
Rim.

First of all, you need to make templates, draw teardrop-shaped petals on cardboard, 2x1.5 cm in size and a sepal. One rosette will consist of petals. The required number of petals must be circled with a toothpick and cut out. Next, proceed to tinting with pastels.

It is necessary to tint the edge on both sides, shading with a sponge. On the sepals it is necessary to make notches with scissors.

The next step is to give the petals and sepals a natural shape. The blanks are heated on an iron and stretched, twisted, compressed. Then we start assembling flowers. Roses are wound on glue in a circle. The sepal is glued last. Next, you need to prepare the rim, fix the base, decorate with lace, glue the roses as you like, and the magnificent decoration is ready.

How and how to firmly fix a foamiran rose on the rim

Foamiran roses can be mounted on a textile base or on a wire, decorating the rim with a ribbon.

Various hairpins and headbands with flowers are now in trend. They are worn by girls, women, even older ladies.

Such a product will help out at any solemn event or photo shoot.

The outfit will immediately become:

touching;
Feminine;
Festive.

Buying a headband with flowers is quite expensive, and it is not always possible to find a model that matches the outfit and hairstyle. It is much more interesting and pleasant to create it yourself. The bezel can be metal or plastic, wide or thin, as you like. Then you need to create roses from plastic suede, any size you like. Flowers are arranged on the rim with a glue gun. If the rim is thin, and it is planned to glue the roses on hot glue, then it is better to sand the surface. It is good to glue roses on very wide rims. A matter of taste of the needlewoman.

How to make a headband with foamiran roses (video)

A little imagination, effort and Have a good mood, and as a result you can get a beautiful product that is useful for yourself or as a present close person. It is not necessary to be a professional needlewoman, starting with simple crafts, after training, as a result, you can gain experience and make real works of art.

Headband with roses from satin ribbons points. Master Class

For those who like to create jewelry and accessories with their own hands, I would like to suggest decorating the headband with roses made of satin and silk ribbons. This master class can also be used to decorate clothes with flowers, create a textile bouquet, topiary for interior decoration, and so on. I wish you all good luck and good mood)