Baby dress crochet feather angel. Crochet baby dress "angel feather"

Coquette (you can knit any other that you like more)

Scheme ribbon lace for a skirt.


I will knit a yoke and a ribbon lace skirt separately, but you can immediately tie the ribbons to the yoke ... how to do this is well shown in the online adult dress (link above)
This is how we should be



MK :

1. We dial 13 in. in and close in a ring in 8 loop air chain(on the diagram it’s a little different, it closes in the 7th loop of the cart. Chains), the 7th century remains free. P.




2. We knit 7 in. n and close them in the first loop of the beginning of knitting.


3. Turn over knitting. We knit 7 in. n, then we knit 10 C1H into the formed ring of the previous row, between the columns 1 c. P.


4. Again 7th c. n and close knitting.


5. Turn over the Chain of 7c. we tie 10 sc, then in the air. a loop between S1N of the previous row, we knit 1SBN, an arch from 3 in. n, 1 sc and 4 such arches


6. In the 5th century. n. between С1Н of the previous row we knit RLS and repeat the previous feather





7. Since I have not yet connected further, I am posting a photo of MK from a foreign magazine.

We knit feathers to the desired length of the dress, we tie the last feather with arches all over, and not half, as in the previous ones, we get 9 arches and begin to tie the second side of the ribbon strip in the same way







We break the thread and proceed to knitting the second strip of ribbon lace.

8. While knitting the second strip, we connect the feathers in the first arch from 3c. n with the same arch of the previous row (this is clearly visible in the main diagram)



9. To expand the skirt from one feather, we make two, for this, in the previous row, in the place of the planned expansion, we need to connect not 10 C1H, but 11 C1H into the ring.


Well, let's not wrap ourselves up on this for now, ... then specifically and think about how to do it right.

In the meantime, we begin to knit a yoke.
My threads are ANNA 16 -530 / 100g, hook No. 1.5.
I advise you to take a yarn that is not very soft so that the skirt stands well and does not look like a rag.


My baby is 2.5 years old.
I don’t have the opportunity to try something on her now, so I knit by applying to knitted blouse.
Cast on 156 stitches. Loops distributed so.


For beginners, to help the video, how to correctly calculate the loops for a square yoke.
Beginning of knitting


The coquette is tied. Along the edge we tie the RLS yoke behind the back wall.
On the wrong side there should be loops from a pigtail, they are marked with a white checkmark.
Then we will continue knitting for this pigtail.


We begin to tie the edge of the coquette with feathers.
The distance between the feathers I have 6 loops RLS.
We connect the feathers together for the first arch.


The yoke is tied. Behind immediately knitted air loops for buttons.



I turn the yoke inside out and for the pigtail that I got when tying the RLS behind the back wall, I start knitting 2 more rows of the yoke (you can knit any number of rows you need), making increments around the edges.
But!!! I knit only in front and back, I do not touch the sleeves.




Now I connect both knitted halves of the yoke next to RLS.
To get to the desired chest width (I have 56 cm), between the back and breast (under the arm), I knit a few more air loops, then I tie everything with the second row of RLS.
If you are satisfied with the resulting breast width, then c. items are not needed.




That's what I did.


I put the yoke aside for now.
I start knitting strips of ribbon lace for a skirt.

I repeat, my skirt will be knitted separately.
Who does not want to mess around can immediately tie the ribbons to the yoke.
How to do this can be found in the online adult dress on the second page (the link is given above). Although, I think you don’t need to look, those who have already tied the yoke with feathers in a circle, the essence is probably clear.

So far I have knitted 2 pieces. two strips each. There are 9 feathers in a strip (this is the length I need)



I'm starting to expand. I decided to do it every 3 rows of strips.
I knit the third row and in the 4th, from the beginning of knitting a feather, I do not 10 C1H, but 11 C1H in a circle.
11 С1Н do strips in only one feather!!!
Then I tie the feathers to the end of the row, I begin to tie the other side of the strip to the feather where we have 11 C1H. I turn to the next arch (marked in a circle in the photo) and start knitting 5 feathers down. Then I tie on the other side as usual.



The skirt is tied. On the top (on the breast) I got -20 feathers, below - 27 feathers.
7 extra feathers gave a slight expansion to the bottom.

For those who have not yet knitted a skirt, the advice is to make the length of the feathers longer (about 1 feather) than planned, as this pattern gives a very strong compression.
It's good that I knitted the feathers separately from the coquette and now I have the opportunity to add a feather on top to get the length I need, because the skirt turned out to be a little short



I connect a skirt with a coquette RLS


The dress is ready.
You need to steam it very carefully, otherwise the feathers stretch out and turn out to be slightly different widths ... but they learn from mistakes
A dress with a lining and decoration is, so to speak, still a raw version.




Coquette (you can knit any other that you like more)

Scheme of ribbon lace for a skirt.

I will knit a yoke and a ribbon lace skirt separately, but you can immediately tie the ribbons to the yoke ... how to do this is well shown in the online adult dress (link above)
This is how we should be

MK knitting ribbon lace:

1. We dial 13 in. in and we close the ring in the 8th loop of the air chain (it’s a little different in the diagram, it closes in the 7th loop of the cart. The chains), 7th c. P.

2. We knit 7 in. n and close them in the first loop of the beginning of knitting.
3. Turn over knitting. We knit 7 in. n, then we knit 10 C1H into the formed ring of the previous row, between the columns 1 c. P.
4. Again 7th c. n and close knitting.
5. Turn knitting over. Chain from 7th c. we tie 10 sc, then in the air. a loop between S1N of the previous row, we knit 1SBN, an arch from 3 in. n, 1 sc and 4 such arches
6. In the 5th century. n. between С1Н of the previous row we knit RLS and repeat the previous feather


7. Since I have not yet connected further, I am posting a photo of MK from a foreign magazine.

We knit feathers to the desired length of the dress, we tie the last feather with arches all over, and not half, as in the previous ones, we get 9 arches and begin to tie the second side of the ribbon strip in the same way



We break the thread and proceed to knitting the second strip of ribbon lace.

8. While knitting the second strip, we connect the feathers in the first arch from 3c. n with the same arch of the previous row (this is clearly visible in the main diagram)

9. To expand the skirt from one feather, we make two, for this, in the previous row, in the place of the planned expansion, we need to connect not 10 C1H, but 11 C1H into the ring.

Well, let's not wrap ourselves up on this for now, ... then specifically and think about how to do it right.

In the meantime, we begin to knit a yoke.
My threads are ANNA 16 -530 / 100g, hook No. 1.5.
I advise you to take a yarn that is not very soft so that the skirt stands well and does not look like a rag.
My baby is 2.5 years old.
I don’t have the opportunity to try something on her now, so I knit by applying it to a knitted blouse.
Cast on 156 stitches. Loops distributed so.
For beginners, to help the video, how to correctly calculate the loops for a square yoke.
Beginning of knitting
The coquette is tied. Along the edge we tie the RLS yoke behind the back wall.
On the wrong side there should be loops from a pigtail, they are marked with a white checkmark.
Then we will continue knitting for this pigtail.

We begin to tie the edge of the coquette with feathers.
The distance between the feathers I have 6 loops RLS.
We connect the feathers together for the first arch.

The yoke is tied. At the back, I immediately knitted air loops for buttons.
I turn the yoke inside out and for the pigtail that I got when tying the RLS behind the back wall, I start knitting 2 more rows of the yoke (you can knit any number of rows you need), making increments around the edges.
But!!! I knit only in front and back, I do not touch the sleeves.

Now I connect both knitted halves of the yoke next to RLS.
To get to the desired width of the breast (I have 56 cm), between the back and breast (under the arm), I knit a few more air loops, then I tie everything with the second row of RLS.
If you are satisfied with the resulting breast width, then c. items are not needed.

That's what I did.
I put the yoke aside for now.
I start knitting strips of ribbon lace for a skirt.

I repeat, my skirt will be knitted separately.
Who does not want to mess around can immediately tie the ribbons to the yoke.
How to do this can be found in the online adult dress on the second page (the link is given above). Although, I think you don’t need to look, those who have already tied the yoke with feathers in a circle, the essence is probably clear.

So far I have knitted 2 pieces. two strips each. There are 9 feathers in a strip (this is the length I need)
I'm starting to expand. I decided to do it every 3 rows of strips.
I knit the third row and in the 4th, from the beginning of knitting a feather, I do not 10 C1H, but 11 C1H in a circle.
11 С1Н do strips in only one feather!!!
Then I tie the feathers to the end of the row, I begin to tie the other side of the strip to the feather where we have 11 C1H. I turn to the next arch (marked in a circle in the photo) and start knitting 5 feathers down. Then I tie on the other side as usual.
The skirt is tied. On the top (on the breast) I got -20 feathers, below - 27 feathers.
7 extra feathers gave a slight expansion to the bottom.

For those who have not yet knitted a skirt, the advice is to make the length of the feathers longer (about 1 feather) than planned, as this pattern gives a very strong compression.
It's good that I knitted the feathers separately from the coquette and now I have the opportunity to add a feather on top to get the length I need, because the skirt turned out to be a little short
I connect a skirt with a coquette RLS

Children's dress "Angel Feather" crocheted. Master class from NINASOKOL - "COUNTRY MOM".


Beginning of knitting

Well, let's not wrap ourselves up on this for now, ... then specifically and think about how to do it right.

In the meantime, we begin to knit a yoke.
My threads are ANNA 16 -530 / 100g, hook No. 1.5.
I advise you to take a yarn that is not very soft so that the skirt stands well and does not look like a rag.


The coquette is tied. On the edge we tie a yoke RLS for back wall.
On the wrong side there should be loops from a pigtail, they are marked with a white checkmark.
Then we will continue knitting for this pigtail.


We begin to tie the edge of the coquette with feathers.
The distance between the feathers I have 6 loops RLS.
We connect the feathers together for the first arch.


The yoke is tied. At the back, I immediately knitted air loops for buttons.




I turn the yoke inside out and for the pigtail that I got when tying the RLS behind the back wall, I start knitting 2 more rows of the yoke (you can knit any number of rows you need), making increments around the edges.
But!!! I knit only in front and back, I do not touch the sleeves.




Now I connect both knitted halves of the yoke next to RLS.
To get to the desired width of the breast (I have 56 cm), between the back and breast (under the arm), I knit a few more air loops, then I tie everything with the second row of RLS.
If you are satisfied with the resulting breast width, then c. items are not needed.




That's what I did.


I put the yoke aside for now.
I start knitting strips of ribbon lace for a skirt.

I repeat, my skirt will be knitted separately.
Who does not want to mess around can immediately tie the ribbons to the yoke.
How to do this can be found in the online adult dress on the second page (the link is given above). Although, I think you don’t need to look, those who have already tied the yoke with feathers in a circle, the essence is probably clear.

So far I have knitted 2 pieces. two strips each. There are 9 feathers in a strip (this is the length I need)


I'm starting to expand.

I decided to do it every 3 rows of strips. To expand the skirt from one feather, we make two, for this, in the previous row, in the place of the intended expansion, we need to connect not 10 C1H, but 11 C1H into the ring.
I knit the third row and in the 4th, from the beginning of knitting a feather, I do not 10 C1H, but 11 C1H in a circle.
11 С1Н do strips in only one feather!!!
Then I tie the feathers to the end of the row, I begin to tie the other side of the strip to the feather where we have 11 C1H. I turn to the next arch (marked in a circle in the photo) and start knitting 5 feathers down. Then I tie on the other side as usual.



The skirt is tied. On the top (on the breast) I got -20 feathers, below - 27 feathers.
7 extra feathers gave a slight expansion to the bottom.

For those who have not yet knitted a skirt, the advice is to make the length of the feathers longer (about 1 feather) than planned, as this pattern gives a very strong compression.
It's good that I knitted the feathers separately from the coquette and now I have the opportunity to add a feather on top to get the length I need, because the skirt turned out to be a little short

Children's dress "Angel Feather" crocheted. Master class from NINASOKOL - "COUNTRY MOM".


Beginning of knitting

Well, let's not wrap ourselves up on this for now, ... then specifically and think about how to do it right.

In the meantime, we begin to knit a yoke.
My threads are ANNA 16 -530 / 100g, hook No. 1.5.
I advise you to take a yarn that is not very soft so that the skirt stands well and does not look like a rag.


The coquette is tied. On the edge we tie a yoke RLS for back wall.
On the wrong side there should be loops from a pigtail, they are marked with a white checkmark.
Then we will continue knitting for this pigtail.


We begin to tie the edge of the coquette with feathers.
The distance between the feathers I have 6 loops RLS.
We connect the feathers together for the first arch.


The yoke is tied. At the back, I immediately knitted air loops for buttons.




I turn the yoke inside out and for the pigtail that I got when tying the RLS behind the back wall, I start knitting 2 more rows of the yoke (you can knit any number of rows you need), making increments around the edges.
But!!! I knit only in front and back, I do not touch the sleeves.




Now I connect both knitted halves of the yoke next to RLS.
To get to the desired width of the breast (I have 56 cm), between the back and breast (under the arm), I knit a few more air loops, then I tie everything with the second row of RLS.
If you are satisfied with the resulting breast width, then c. items are not needed.




That's what I did.


I put the yoke aside for now.
I start knitting strips of ribbon lace for a skirt.

I repeat, my skirt will be knitted separately.
Who does not want to mess around can immediately tie the ribbons to the yoke.
How to do this can be found in the online adult dress on the second page (the link is given above). Although, I think you don’t need to look, those who have already tied the yoke with feathers in a circle, the essence is probably clear.

So far I have knitted 2 pieces. two strips each. There are 9 feathers in a strip (this is the length I need)


I'm starting to expand.

I decided to do it every 3 rows of strips. To expand the skirt from one feather, we make two, for this, in the previous row, in the place of the intended expansion, we need to connect not 10 C1H, but 11 C1H into the ring.
I knit the third row and in the 4th, from the beginning of knitting a feather, I do not 10 C1H, but 11 C1H in a circle.
11 С1Н do strips in only one feather!!!
Then I tie the feathers to the end of the row, I begin to tie the other side of the strip to the feather where we have 11 C1H. I turn to the next arch (marked in a circle in the photo) and start knitting 5 feathers down. Then I tie on the other side as usual.



The skirt is tied. On the top (on the breast) I got -20 feathers, below - 27 feathers.
7 extra feathers gave a slight expansion to the bottom.

For those who have not yet knitted a skirt, the advice is to make the length of the feathers longer (about 1 feather) than planned, as this pattern gives a very strong compression.
It's good that I knitted the feathers separately from the coquette and now I have the opportunity to add a feather on top to get the length I need, because the skirt turned out to be a little short

Coquette (you can knit any other that you like more)

Scheme of ribbon lace for a skirt.


I will knit a yoke and a ribbon lace skirt separately, but you can immediately tie the ribbons to the yoke ... how to do this is well shown in the online adult dress (link above)
This is how we should be



MK :

1. We dial 13 in. in and we close the ring in the 8th loop of the air chain (it’s a little different in the diagram, it closes in the 7th loop of the cart. The chains), 7th c. P.




2. We knit 7 in. n and close them in the first loop of the beginning of knitting.


3. Turn over knitting. We knit 7 in. n, then we knit 10 C1H into the formed ring of the previous row, between the columns 1 c. P.


4. Again 7th c. n and close knitting.


5. Turn over the Chain of 7c. we tie 10 sc, then in the air. a loop between S1N of the previous row, we knit 1SBN, an arch from 3 in. n, 1 sc and 4 such arches


6. In the 5th century. n. between С1Н of the previous row we knit RLS and repeat the previous feather





7. Since I have not yet connected further, I am posting a photo of MK from a foreign magazine.

We knit feathers to the desired length of the dress, we tie the last feather with arches all over, and not half, as in the previous ones, we get 9 arches and begin to tie the second side of the ribbon strip in the same way







We break the thread and proceed to knitting the second strip of ribbon lace.

8. While knitting the second strip, we connect the feathers in the first arch from 3c. n with the same arch of the previous row (this is clearly visible in the main diagram)



9. To expand the skirt from one feather, we make two, for this, in the previous row, in the place of the planned expansion, we need to connect not 10 C1H, but 11 C1H into the ring.


Well, let's not wrap ourselves up on this for now, ... then specifically and think about how to do it right.

In the meantime, we begin to knit a yoke.
My threads are ANNA 16 -530 / 100g, hook No. 1.5.
I advise you to take a yarn that is not very soft so that the skirt stands well and does not look like a rag.


My baby is 2.5 years old.
I don’t have the opportunity to try something on her now, so I knit by applying it to a knitted blouse.
Cast on 156 stitches. Loops distributed so.


For beginners, to help the video, how to correctly calculate the loops for a square yoke.
Beginning of knitting


The coquette is tied. Along the edge we tie the RLS yoke behind the back wall.
On the wrong side there should be loops from a pigtail, they are marked with a white checkmark.
Then we will continue knitting for this pigtail.


We begin to tie the edge of the coquette with feathers.
The distance between the feathers I have 6 loops RLS.
We connect the feathers together for the first arch.


The yoke is tied. At the back, I immediately knitted air loops for buttons.



I turn the yoke inside out and for the pigtail that I got when tying the RLS behind the back wall, I start knitting 2 more rows of the yoke (you can knit any number of rows you need), making increments around the edges.
But!!! I knit only in front and back, I do not touch the sleeves.




Now I connect both knitted halves of the yoke next to RLS.
To get to the desired width of the breast (I have 56 cm), between the back and breast (under the arm), I knit a few more air loops, then I tie everything with the second row of RLS.
If you are satisfied with the resulting breast width, then c. items are not needed.




That's what I did.


I put the yoke aside for now.
I start knitting strips of ribbon lace for a skirt.

I repeat, my skirt will be knitted separately.
Who does not want to mess around can immediately tie the ribbons to the yoke.
How to do this can be found in the online adult dress on the second page (the link is given above). Although, I think you don’t need to look, those who have already tied the yoke with feathers in a circle, the essence is probably clear.

So far I have knitted 2 pieces. two strips each. There are 9 feathers in a strip (this is the length I need)



I'm starting to expand. I decided to do it every 3 rows of strips.
I knit the third row and in the 4th, from the beginning of knitting a feather, I do not 10 C1H, but 11 C1H in a circle.
11 С1Н do strips in only one feather!!!
Then I tie the feathers to the end of the row, I begin to tie the other side of the strip to the feather where we have 11 C1H. I turn to the next arch (marked in a circle in the photo) and start knitting 5 feathers down. Then I tie on the other side as usual.



The skirt is tied. On the top (on the breast) I got -20 feathers, below - 27 feathers.
7 extra feathers gave a slight expansion to the bottom.

For those who have not yet knitted a skirt, the advice is to make the length of the feathers longer (about 1 feather) than planned, as this pattern gives a very strong compression.
It's good that I knitted the feathers separately from the coquette and now I have the opportunity to add a feather on top to get the length I need, because the skirt turned out to be a little short



I connect a skirt with a coquette RLS


The dress is ready.
You need to steam it very carefully, otherwise the feathers stretch out and turn out to be slightly different widths ... but they learn from mistakes
A dress with a lining and decoration is, so to speak, still a raw version.