One day I came across beautiful slippers on the Internet. crocheted. I was interested in openwork pattern, which is called "crocodile skin" or "fish scales", as I later learned. There were no diagrams or instructions for these homemade flip flops. I took advantage of the idea and also knitted house slippers with a crocodile skin pattern.

Especially for knitting flip flops, I bought leather insoles, which already have holes around the entire perimeter. The holes are at a distance of 1 cm from each other and from the edge. I also need a hook No. 2 / 2.5 and yarn in two colors: lilac and yellow.

Let's get down to the details of the job:

1) I'll start by tying the insoles. In each hole of the workpiece, I make 2 single crochets.

2) Soles for slippers are ready. Despite the fact that the holes are made unevenly, the strapping is quite neat.

3) The top of the home slips will be made with a crocodile skin pattern. In the photo you see the standard pattern of this knitting. However, I will change it a bit. Firstly, you will have to knit not with a solid fabric, but with a triangle. Secondly, I decided to sharpen the ends of the scales - for beauty.

4) I dial 12 + 1 air loops.

5) I insert the hook into the seventh loop of the chain, I make 1 double crochet, 1 air loop, 1 more double crochet in one loop with the first and complete the row with a half single crochet in last loop chains. We turn the resulting blank so that its left edge is at the top, as shown in the photo.

6) I make 5 double crochets for the top double crochet, as in the photo. There can be more columns: 6 or 7. It all depends on the thickness of the thread and your wishes. One side of the scale is ready. doing 2 air loops and a half-column without a crochet in the second loop from the hook. It turned out to be a peak.

7) Now you need to knit 5 double crochets for the second double crochet. Turning the product inside out, I make a half-column without a crochet to the beginning of the chain.

8) Here is the first scale. The second row is performed as follows: 6 + 1 air loops, 1 double crochet in the right edge of the scale, 1 air loop, 1 double crochet in the same loop as the first column, 1 air loop, 1 double crochet in the middle of the scale , 1 air loop, 1 double crochet in the left edge of the scale, 1 air loop, 1 double crochet in the same loop as the previous one.

9) Similarly, I knit the scales of the second row - for double crochets, knitted in one loop. And in each single double crochet, I make a half single crochet.

10) I think that the principle is clear to you. The third row is performed similarly to the previous one, only there will be three scales.

11) Here is such a wonderful scaly triangle I got. This is the top of the slippers.

12) Pay attention to how the pattern looks from the inside. Chains of air loops formed along the edge of the left side. Similar chains must be made along the right edge. They will be needed to connect the pattern with slippers.

13) I return to the sole. I start knitting the top of the slipper with single crochets. It is important to knit them for the strapping posts, as in the photo.

14) I do the first row - 6 single crochet at the very top of the insole. At the end of each row, you need to knit 2 connecting posts without a crochet for tying. Then I turn the work and knit the next row.

15) After completing 5 rows - a slipper nose, you need to proceed to knitting the sidewalls. To do this, I perform single crochets in a large semicircle, reaching to the middle of the insole. I do not forget that the loops are knitted for the strapping posts. When there are 2 rows from the inside of the foot, and 4 from the outside, you can start attaching the scales.

16) As I wrote earlier, the connection is made for air chains along the edges of the triangle, using single crochets.

17) Having fully attached the part with the pattern, I knit the top of the slipper with lilac single crochets. Please note that the strapping is done in a semicircle from the middle of the insole.

Many people prefer to wear home slippers - flip flops, without heels, they are convenient to put on and take off with one movement of the foot. To crochet slippers- flip flops will require a sole or an insole that holds its shape well, you can use dense felt insoles with a sewn-on lining at the bottom.

For knitting slippers, take 50 grams of acrylic yarn in two contrasting colors, a dark tone for knitting an insole, and light color for knitting the upper part of slippers.

First you need to link upper part of the insole and connect it to the felt sole. To knit the insole, cast on a chain of air loops with a length equal to the length of the insole minus its width.

Tie the initial chain in a circle, making art. b / n along the narrow part of the foot, and to expand the foot, knit 3 half-columns, on the wide part, knit st. s / n. Closer to the fingers, on the last 6 loops of the chain, knit 3 half-columns, 2 tbsp. b / n, from the final loop of the initial chain for rounding, knit 5 tbsp. b/n. On the underside of the initial chain, knit stitches in reverse order.

Knit the second row of the footprint in the same way as the first, increasing the height of the columns in the wide part of the foot. To round the footprint at the fingers and heels, add evenly 3 tbsp. b / n, knitting at three points from one loop of 2 tbsp. b/n.

The bonded insole should be the same size as the felt sole.

Felt sole tie around the edge next to st. b/n. To do this, pierce the sole with a thick gypsy needle or awl at a distance of 5 mm from the edge. Insert a hook into the holes formed, grab the working thread and pull the loop to the edge of the sole, knit st. b/n. In places of rounding, make two or three columns from one hole.

Do not break the thread and knit a row of st. b / n to connect the felt sole and the associated insole, for this knit st. b / n along the edge, introducing the hook simultaneously into the half-loops of the insole and the strapping of the sole. When finished, secure, cut the thread.

For knit top slipper if you have a thin acrylic thread, make it in two additions. Attach the thread to the corner of the sole at the thumb, knit a short row of st. b/n. To knit the next row, instead of the instep air loop, make a connecting column along the row of the sole.

Turn work and * knit the next row of st. b / n back, starting from the second loop from the hook. At the end of the row, make st. b / n from the side of the sole and a connecting column instead of an air lifting loop for the next row. *

Turn the work and repeat from * to *, in each row one column is added to expand and lift the foot.

To decorate slippers, tie a chamomile flower with lush thin petals of yarn in a contrasting color.

For the center of the flower, tie a bump. Dial a chain of 5 air sts, close it in a ring, knit st. b / n in a spiral, always inserting the hook into the center of the ring, until a voluminous bump is formed.

Crocheted slippers are best done on the sole or insole. The insole can be felt, leather, fur. You can cut the soles from the tops of old boots.

Home slippers are crocheted from separate 6-coal motifs. It is advisable to take the insole one size larger. If it is uncomfortable with a simple insole, buy an orthopedic one.

For work you will need:

1. Cotton yarn type "Violet" - 150 grams.
2. Hook 3 mm.
3. Insoles.
4. Scissors.
5. Awl or thick needle.

The yarn must be connected in two threads, and if the yarn is thin - in three. The knitting should be tight so that the slippers keep their shape and are comfortable. First, we tie the insoles, which we first pierce with an awl, departing from the edge of 0.5 cm. The distance between the holes is 0.5 cm.

When tying, we use single crochets, two in each hole. Then you need to measure the length of the tied insole around the perimeter in order to further calculate the length of the motif.

A prerequisite is that the length of the side of the motif, multiplied by 8, must be equal to the length of the insole along the perimeter (if necessary, you can change the pattern by removing or adding rows in it).

Collecting slippers. To do this, we take three ready-made motives and sew them together following scheme: the sides marked with the number 1 are sewn with one front seam. We sew the sides marked with the number 2, getting the back seam. The sides under the number 3 will be sewn to the insole in the future. The sides marked with the number 4 are left unsewn.

You can crochet the motifs from the outside, or use a needle and sew them from the inside - whichever is more convenient for you.

It should work like this:

Chop off the details together with the insole with pins or bast by moving the spout to the right or left of the central part. This will turn out the right and left slippers. We tie our slippers to the insole. We got comfortable slippers.

For these colorful slippers, it is better to take a felt sole. Optionally, it can be replaced with cut out leatherette or fur.

For work you will need:

1. Yarn-wool or wool with acrylic - 150 grams.
2. Hook 3.5 mm.
3. Felt insoles.

We start knitting with a sock. The pattern can be anything, the main thing is that it is convenient for adding. We knit with a pattern of double crochets. We make additions to the little finger, that is, 4-5 cm.

At the level of the rise, we pass to the sidewalls and begin to knit in this way.

This is how the canvas turns out. It looks like the letter P. The length is determined by applying to the foot or insole.

Here is a knitting pattern for the beginning of a sneaker.

Sew the back seam. We do this without breaking the thread, from bottom to top with single crochets.

We continue to knit in a circle. The height of the slipper depends on your desire.

We attach the top to the sole, fasten it with pins, so that it is more convenient to sew on.

Sew the top to the sole with a seam "over the edge". It is better to take a stronger thread.

These comfortable warm slippers suitable for both children and adults. This model has a knitted and leather sole. To work, you need wool yarn (you can have leftovers) and a small hook. The scheme is given for 37-38 foot size. If you need a different size - add or decrease the number of air loops. We collect 22 air loops and knit a trace according to the scheme:

For one slipper, we need two knitted footprints. Below is a trail for children's slippers, for them to dial 18 air loops (given for comparison).

To begin with, we take one trace and begin to knit slippers from a series of concave embossed columns.

Here's what should happen.

View from the back.

We begin to make reductions from the third row.

We do the reductions as follows: 3rd, 4th, 6th and 8th rows - decreases on the central five columns. We knit the 1st, 3rd and 5th convex columns together, as unfinished, skip the 2nd and 4th.

5th and 7th rows - on the central nine columns we make decreases, knitting the 1st, 3rd, 5th, 7th and 9th convex columns together, like unfinished columns. 2nd, 4th, 6th and 8th skip.

We knit the second slipper, like the first.

From a piece of leather we cut out the sole, a little less than a trace. We sew the sole on the machine. If you don't have a machine, you can do it manually.

We attach the blank to the slipper and sew.

You have learned how to knit simple loops: knit and purl, why don't you try to knit slippers with knitting needles? Slippers are essential footwear for every day at home. Even if you are warm and comfortable at home, in slippers, knitted with your hands you will feel much more comfortable.

Slippers with knitting needles can be knitted from thick yarn of the same color, or you can choose fun colors and spend the rest of different threads. Multi-colored slippers are knitted using lazy jacquard or patchwork technique. Both of these techniques are interesting and unusual. It is worth trying them on simple things, like slippers, and then using them in large products.

Sole for knitted slippers

The weakest point in knitted slippers is the sole. It wears out quickly, so to strengthen the sole, you can add a thick nylon thread to ordinary threads. Alternatively, you can buy a ready-made sole for slippers, tie a double sole, sew to knitted sole leather insoles or buy special yarn for knitting socks. It is pre-treated and resistant to abrasion and does not peel.

Yarn for knitting slippers with knitting needles:

1. Alize Superwash - 75% superwash wool, 25% polyamide; 420 m/100 gr. (Turkey)
2. Yarn Opal (Germany). This yarn has many colors and patterns, but it is expensive.
3. Yarn Trinity sock Waterfall - 70% wool, 30% capron; 400 m/100 gr. The most affordable. Suitable for plain slippers. (Russia)
4. Yarn ZitronTREKKINGXXL - 75% virgin wool, 25% polyamide; 420 m / 100 gr); (Germany).
5. Yarn Pekhorka Nosochnaya - 50% wool, 50% PAN; 200m/100gr (Russia). This yarn has the smallest amount of wool in the composition.
6. Schachenmayr Regia yarn for socks is of high quality and beautiful, composed of 75% wool and 25% polyamide. She has one minus - the price. Yarn from Germany.

What knitting needles to choose for knitting slippers

The choice of knitting needles depends on the model of slippers. Some slippers are knitted on 5 stocking needles, and some on two knitting needles. A crochet hook is often used to knit soles. And yet, do not forget to purchase markers, they are needed for complex patterns.

But for starters, it’s still worth choosing the model you like and buying yarn for it, choosing knitting needles. We have already talked about yarn, and now we offer you a selection of more than 30 models of slippers with knitting needles. Knit for your pleasure.

Slippers with knitting needles. Models from the Internet

Rectangular knitting slippers: a step-by-step master class!

interesting selection to the website Selection for knitting on 2 knitting needles

The basis of these wonderful knitted slippers is the most ordinary rectangle, knitted on two knitting needles, and then sewn along the sole. Brilliant solution, right? Here are two options for rectangular slippers, green and red-brown. See detailed master class with a pattern from Elena Gotlib and please yourself with a new thing!

Slippers knitting from T. Brazhnikova

Scandinavian slippers knitting

Let's knit slippers for the house, soft, beautiful and comfortable. They will be pleasant to walk around the apartment, easily and silently.

They are knitted from Vintage yarn (200 m/100 g), in two colors - Oats and Promenade. We take one skein of each color. The thread of yarn includes fibers of wool (40%), acrylic (52%) and nylon (8%). It differs in endurance, softness and good preservation of appearance.

We will knit with 4.5 mm knitting needles and 4 mm crochet. You will need a stitch marker (pt).

Knitted slippers knitted garter stitch

Yarn: two skeins of fine sock yarn (each yarn needs about 35 g / 160 yd / 150 m). Since these two yarns will be joined together, you can choose the appropriate thickness of yarn for knitting in one thread.
Yarn in a contrasting color for the seam and hem (fine for knitting in 2 strands or thicker yarn).
Size: female large (EUR41). The size can be easily selected by changing the number of loops and the length of the sock.
Gauge/Needle: Gauge: 19 sts / 10 cm (4 inches) in garter st.
Needles: 3.5 mm (circular or stocking). One additional knitting needle for closing loops using the 3-needle method. Hook 3.5 mm. Darning needle for stitching.

Knitted slippers knitted with lazy jacquard

• Size 37-38.
• Yarn “Krokha” Troitsk Worsted Mill, 20% wool, 80% acrylic, 135 m / 50 g.
• Consumption of light gray yarn 30 g, brown 40 g.
• Set of 5 knitting needles No. 3.

Knitted slippers from designer Ashley Knowlton

• Slipper final measurements: foot circumference: 16.5(19.5, 22) cm.
• Length to joint: 10(11.5,12.5) cm.
• The overall length can be changed.
• Yarn: about 92 (110, 146) m of thick yarn. The total footage depends on the final length.
• Sample used yarn Quince and Co. Puffin (100% wool, 102m per 100g skein), color Parsley (parsley).
• Knitting needles and tools: US 10.5 circular needles (6.5mm), for knitting using the magic loop method, two cr. knitting needles, or a set of toe knitting needles.
• Needle for braids; tapestry needle; latex glue for soles (preferably).

Slippers - knitting boots

Slippers - knitting slippers

Slippers - footprints with knitting needles

Slippers with knitting needles. Works of our readers

Slippers spokes Three leaves. The work of Tatyana Nakonechnaya

Slippers knitting cappuccino. The work of Tatyana Nakonechnaya

Slippers Lilac spokes. The work of Ivanova Svetlana

Slippers - traces with knitting needles. The work of Ivanova Svetlana

Slippers Spring. Tatiana's work

Slippers from pawa. Tatiana's works

Knitted slippers. Tatiana's works

Slippers with knitting needles. Tatiana's works

Knitted slippers. Tatiana's work

Knitted slippers - footprints. Valeria's work

Knitted slippers - footprints. Valeria's works

Knitted slippers with a dog. Farida's work

http://agulhaspinceisemais.blogspot.com/search/label/Pantufas

Crochet slippers
Crochet together beautiful slippers 21, 23, 35 sizes. The knitting pattern is simple, the description is accessible and simply written. Slippers turn out just a miracle, but they cost a penny. You can use leftover yarn and combine colors to your liking. The following describes in detail how to knit a pattern, how to change the color of the thread, etc.

Shoes MK


Girls, slippers knitted with acrylic threads and crochet No. 3. I knitted for a child of 4 years old - Foot 16 cm. For the base of the foot, I dialed 28 ch. (for myself - size 36 - I gain 38 vp)

I give the description for the child's legs.

WE KNIT THE FOLLOWING WAY:

1 row. 28 ch, ch 3 for lifting and 4 sts from the hook we knit dc, and then along the chain 25 dc, into the last loop 5 dc, on the other side of the chain 25 dc and into the last loop 4 dc. and connect.

2 row. 3 vp for lifting and we knit 26 dc, 5 increments dc, 26 dc, 5 increments

3 row. 5 sc, 5 prss, 18 prs, (inc, prs) - 7 times, 18 prs, 5 prss, 5 prs, (inc, prs) - 7 times.

4 row tie with columns without nakika.

5 row. Knit with purl embossed double crochets.

Embossed double crochet, front (embossed st. s / n. persons.): knit st. s / n, circling the item of the lower river. from faces. sides on out. side.

Embossed double crochet, purl (embossed st. s / n. out.): knit st. s / n, circling the item of the lower river. with out. sides to faces. side.

Having finished the 5th p. feet, continue knitting with an elastic band with a relief column, performing decreases to form a toe, starting from the 2nd p. as follows: on the central 5 p. of the toe, knit the 1st, 3rd and 5th p. Art. s / n, closed together, while skipping the 2nd and 4th p. Repeat these decreases in each row to the desired height. Then knit 1 p. Art. b / n without reductions. Edge can be tied step by step but I didn't tie

Knitted both plain and striped. Striped ones are prettier.