Little girls love to repeat after their mothers so much, they begin to pay attention to fashion much earlier than boys and try to imitate adults. Therefore, if your child does not want to wear an ordinary scarf, then offer an original children's bactus with knitting needles. It will warm the neck in the cold, and will look more original. To make a girl stylish, you just need to learn how to knit a bactus with knitting needles, the description of which is given below, and stock up on threads.

You will need:

– yarn (70% acrylic, 30% wool, 500m/100g);
- knitting needles No. 4.

Knit will be according to the following description:

We knit the first row of facial, before the last loop of the yarn, and then the front;

Second: front loop, front crossed, all other front loops to the end of the row;

Third: knit 2, *yo, knit 2 together* and repeat from ** to the last loop. The last loop is the front;

In the fourth row, all facial;

We knit the fifth row, like the first.

We knit the sixth row, like the second.

7 and 8 rows - facial loops.

Thus, we knit to the middle of our bactus for a girl.

And then at the end, instead of yarn over, knit 2 loops together until there are 4 loops on the needles.

We close them. Here is such a wonderful children's bactus with knitting needles for a baby with a size of 24cm * 121cm.

Beautiful and sophisticated wardrobe items emphasize the sophistication of every woman. In this master class, we will learn how to knit such items on our own. A large number of visual master classes will help you create baktus.

To knit a beautiful and original baktus with knitting needles, you need to be patient, because sometimes the length of this accessory exceeds 1.5 m. But, it is difficult to scare a real needlewoman with such trifles, and therefore not only many experienced, but also novice craftswomen pick up knitting needles and start knitting.

We knit an original scarf - baktus

Today, especially for beginner craftswomen, we want to talk about how to tie a bactus according to a scheme with a detailed description. The work is quite simple, as the product is knitted with a garter stitch.

In order for knitters who are just starting to knit the same original and stylish bactus as in the photo, they need to prepare the following materials in advance: melange yarn and a pair of knitting needles.

During the description of the knitting pattern, we will use some cuts:

• Loop - p.
• Row - r.
• Facial - persons.

Progress:

Video: Warm scarf - bactus

Bactus with openwork edges

By knitting a simple scarf with even edges, beginner needlewomen can try to complicate the task a little and knit a model with openwork edges. To do this, you just need to be patient and study several schemes with a description:

Description of knitting with an openwork border of sock yarn:

When the work is completed, you should get the same original and elegant scarf with an openwork border as in the photo.

Video catalog of openwork bactus

We knit a bactus with a scalloped edge

A beautiful bright bactus with a jagged edge will definitely not leave anyone indifferent. With the help of such an unusual accessory, you can "revive" any outfit and at the same time attract increased attention to yourself. The length of the scarf is 145 cm, and the width in the central part is 28 cm.

To work, novice craftswomen will need the following materials and tools:

• Pair of knitting needles No. 4
• Acrylic threads "adelia" - 1 skein

In the description of the knitting technique for a female model with a toothed edge, there are cuts previously unused:

• Edge - chrome.
• Air - air.

Progress:

First we dial 4p .. Then we knit in rows:

No. 1: edge, from 1 p. we knit 2 (that is, from 1 p. we perform the front for the front wall and for the back wall), faces.

No. 2: chrome, persons. - 2 pieces, from 1 we make 2, chrome, air ..

No. 3: chrome, from one - two, to the end of the row of faces, and then 1 chrome ..

No. 4, 6: 1 chrome, front, from 1 we perform 2, front.p. and air.p..

No. 5, 7: knit in the same way as in 3 p ..

No. 8: close 5 p., facial, from 1 p. 2, persons. and air..

We repeat the pattern from 1 to 8 p.

When there are 144 sts on the needles, the number of gear parts should be 21 pcs.

Now let's describe the knitting of the scalloped edge in more detail:

Pay attention to the fact that the penultimate jagged detail on the edge must be knitted not on 7, but on 6 p..

The last jagged detail consists of 4 rows. It is connected by faces. P..

At the end of the loop must be closed.

An elegant bactus with jagged edges for beginners is ready:

Video: Bactus with a jagged edge

Openwork bactus - quickly and easily

Another model that we want to present to beginner craftswomen is knitted from Superwash Paints yarn.

The model in the photo is 81 cm long and 35 cm wide.

To create it you will need:

• 1 skein of yarn
• Pair of regular knitting needles
• 2 markers

The description will use the same abbreviations as in the previous master classes.

We begin work with a detailed description of all actions:

Bactus with knitting needles with a simple diagram and description is ready.

Video: How to tie a bactus

A scarf is an integral part of a woman's wardrobe, so today we want to tell you how to knit a fabulously beautiful and cozy Norwegian triangular scarf - baktus. The shape of the scarf resembles an ordinary scarf, which will become a real decoration in your wardrobe.

Recommended yarn composition: merino, merino/acrylic, cotton/acrylic, microfiber or viscose. The yarn needs to hold its shape to create voluminous and attractive folds. We will need 200-300 grams of yarn, about 600 meters. Needles: 3 to 4.

Additionally, for work we need:

1. 50 markers or paper clips if you don't have the required number of markers. You can also use colored threads of different colors.

2. The hook is 1.5-2 numbers larger than the used knitting needles.

We collect loops in the following way: we take a hook 1.5 -2 numbers more than the number of knitting needles used, with a hook number 5, with knitting needles number 3.5.

You need to crochet a chain of air loops, turn it upside down, pick up the top loop and put each loop on the knitting needle. You will get a row of beautiful air loops. You can cast on loops in the usual way, but then the edges of the bactus scarf will not look so impressive and elegant.

After dialing the extreme loops, it's time to take on our markers or paper clips. We need the following on the needle: 12 loops, * hang a marker, 11 loops *, repeat from star to star until the last 12 loops remain, dress them and start knitting.

IMPORTANT! The loops must be cast on from the end where we have a tail from the cast-on, so that after putting on the last 12 loops, we have a working thread to the ball!

Thus, you will have 288 loops and 25 markers (paper clips) hung.

We start knitting:

In all rows, the loops must be knitted facial. Knit short rows using the twisting method at the end of each row.

Knit the first six stitches around the right needle, throwing a working thread over it, as shown in the photo, turn around and knit in the opposite direction to the edge. The edge loops at the end of the row should be purl, removed at the beginning of the row.

1 row: (front) slip the first loop, knit 5 loops and wrap around the right knitting needle;
2 row (purl) knit facial 6 loops;
3 row (front) remove the first, knit 5 loops with the front, knit the twist together with the next loop of the front, knit five more loops with the front and wrap the right knitting needle again as shown in the picture;
4 row (wrong side) knit 12 loops;
5 row (front) remove the first, knit all the loops to the twist, remove the marker, knit the twist with the next loop together, knit 4 more loops (total knitted 17 loops) make a twist;
Row 6 (purl) Knit all stitches to the end of the row.
7 row (front) remove the first one, knit all the loops to the twist, knit the loop together with the next loop, knit another 5 loops and twist;
Row 8 (purl) Knit all sts to last 2 sts. Knit the next loop with the front one, first behind the front and then behind the back wall. (It will turn out - we added one loop), knit the edge in the usual way.
9 row (front) slip the first, knit all loops to the twist, remove the marker, knit the twist with the next loop together, knit 4 more loops, make a twist;
Row 10 (purl) knit all loops to the end of the row;
11 row (front) remove the first, knit all the loops to the twist, knit the twist with the next loop together, knit another 5 loops and make a twist;
Row 12 (purl) Knit all loops.

In every eighth row, additions should be made - in order not to get confused and not to forget about the additions, hang the marker or paper clips as you knit.

Repeat rows 5 to 12 until you have used all the cast on stitches.

Decrease:

On the longest row, work the last 6 stitches, turn around and work back to hem. On the next RS row, skip these 6 sts, wrap around, turn around and work to the end. On the next RS row, skip 5 sts (counting from the last twist), wrap around, turn around and work to the end.

Don't forget to make slits and increases in the right edge of the scarf, as shown in the diagram. Cuts must be made every 13 ribs, counting them on the front side.

On a purl row, cast off 11 sts as usual (do not remove the first and second marker and do not transfer them from row to row until the end of the last slot). You just need to count the vertical loops and place the next slot above the previous one.

Slip the last remaining stitch onto the left needle.

Using the twisting method, cast on 12 loops and through the last loop cast on, pull the first loop from the right knitting needle, pulling the thread well. You will have 11 cast on stitches, continuing to knit the row in the opposite direction, as it was before the cast on.

You will get a cozy Norwegian bactus, the size before washing is 135 cm long at the longest point, 67 wide at the widest point and 56 perpendicular to the typesetting row. By weight 141 grams, total 485 meters. After washing, the scarf may increase and straighten out.

Baktus is a newfangled kerchief scarf that can be knitted literally in a matter of hours. The technique is so simple that even beginners do not need additional instructions. Knitted bactus is made in just a few steps. Thanks to this simplicity, he gained incredible popularity. In addition, this accessory looks very impressive.

Bactus is a newfangled scarf-kerchief that knits literally in a matter of hours.

A scarf or scarf for a woman with a scalloped border is not difficult to knit. A simple pattern is understandable even to beginner knitters. Indeed, what could be easier than a garter stitch.

What is necessary:

• 100 g of yarn;
• knitting needles number 4.

We knit according to the scheme:

1. Three loops are cast on and ten rows are knitted with facial ones, be sure to make an increase in each even row.
2. In order to perform a zigzag, the first loop is removed not knitted, the second is knitted, after which the constriction is made. The right stitch is thrown over to the left, returns to the left knitting needle and becomes a hem stitch, three loops are closed.
3. After that, the zigzag technique is repeated from the second to the tenth row. At the same time, all even rows fit in with the increase.
4. Increases are made until the height of the product is 30 cm and the length is 1 m.
5. After that, the knitting of the other side of the workpiece begins. First of all, the top of the triangle is formed. For this purpose, the partial knitting method is used.
6. In the first two rows, the edge stitch is removed and the next two are knitted.
7. The work is turned and the remaining unknitted stitches remain on the left needle.
8. Now all three loops are knitted, and the hem loop is also made front.
9. On the next two lines, the hem is removed, only the next two are knitted.
10. Knitting is turned and all loops are made in the same pattern as in the second line.
11. Thus, in each of the odd rows, one knitted stitch is added.
12. When there are already five loops on the knitting needle, they are closed by analogy with knitting cloves.

Work continues until the entire side is decorated with cloves.

Scarf Baktus: knitting for beginners (video)

Openwork bactus breakwater spokes

In order for knitting to be successful, it is only necessary to learn how to do the work with front stitch and garter stitch. These techniques can be safely called the basics of needlework. Accordingly, even a beginner can do this diagonal ornament.

In order for knitting to be successful, you just need to learn how to do the work with front stitch and garter stitch

Detailed description:

1. A set of three loops, of which six rows are knitted with front stitch. In the last of them, an increase is made. To do this, two front stitches are knitted first for the front wall, and then for the back.
2. Six lines are made with the wrong side and an increase is also made on the last one.
3. These two stages are repeated until the height of the product reaches forty centimeters.
4. The alternation of the front and back surfaces continues, but at the same time, in every second line, one loop is added on the inside and one loop is removed in every sixth.
5. According to this pattern, another thirty centimeters of the product is knitted in height.
6. At the beginning of every sixth row, four stitches are closed and added one at a time in even rows at the end of the row, and in odd rows at the beginning.

When the scarf is the desired length, bind off all loops.

How to knit a bactus scarf with a garter stitch: a master class

It is best to knit such a winter accessory from mohair. It is from this yarn that the product will be very warm and beautiful. Depending on the color of the threads, the scarf can be both female and male. A simple pattern will suit absolutely everyone.

Progress:

1. Four loops are cast on the knitting needles.
2. All rows are knitted with facial loops. Including edge stitches.
3. Yarn over in the fourth row, as in all multiples of four.
4. Increases are made until the width of the product is equal to thirty centimeters.
5. After that, decreases are made, also in each multiple of four lines.
6. Knit according to this principle until only four loops remain. They then just close.
7. With the help of a hook, spirals are made along the edges. To do this, twenty air loops are collected and three columns with a crochet are knitted into them.

A simple pattern will suit absolutely everyone

Finished spirals are tied to the edges of the product. Thus, it turns out to additionally decorate the bactus.

How to tie a bactus to a child: step by step instructions

Beautiful, with crocheted elements, children's bactus will give any girl an amazing mood. It looks incredibly gentle and elegant. A little fashionista will certainly appreciate this product, the main thing is to know the correct sizes.

Progress:

1. Work begins with a set of four stitches. All actions are performed face-to-face.
2. In each multiple of four rows, an increase of one stitch is made.
3. When the number of loops on the needle is equal to seventy-five, it is necessary to start strangulation. Also in every fourth row, so that the product looks symmetrical.
4. Crochet a bactus around the perimeter, observing the following sequence of actions; three columns with a crochet, a pair of air stitches, three more columns and one air loop.

Despite the simplicity of making a Norwegian scarf-kerchief, this work also has its own characteristics.. It is the little things that determine how high-quality and beautiful the finished product will look.

Despite the simplicity of making a Norwegian scarf-kerchief, this work also has its own characteristics.

That is why it is so important to adhere to the following recommendations:

1. The standard length of the product is 50 cm, but if desired, it can be shortened or, conversely, made longer.
2. The average amount of yarn required varies from 200 to 400 grams. It is better to take a little more than originally intended.
3. It is better to choose yarn from a mixture of acrylic and wool. The product will be soft and will not cause irritation.
4. Knitting always starts from an acute angle.
5. Regardless of the pattern chosen, it is necessary to add one loop in each line, a multiple of four.
6. In order for the scarf not to twist, the first and last loop must also be knitted with the front one.

For a more original design of the bactus, it is recommended that the penultimate loop in the row be simply removed and not knitted, and the last one should be purl. At the same time, make an increase with the third loop in the line.

Knitting bactus: ideas

The classic triangular scarf is knitted in garter stitch and, in principle, is not decorated with anything else. But for fans to dream up this rule is unacceptable.

1. Skillful needlewomen combine the front and back surfaces, due to which it is no longer an ordinary bactus, but an original breakwater scarf.
2. If desired, you can tie the product with openwork viscous or leaves. In this case, the scarf will be just perfect for the off-season.
3. Even a classic triangular scarf can be crocheted, resulting in a more original, but very warm product.
4. An extraordinary decoration of an accessory can be tassels made from a strand or connected curls.
5. Even an ordinary brooch can transform an already beautiful product beyond recognition.

Mk how to knit bactus with knitting needles (video)

Bactus is not only an original, but also a practical product, because it can be used not only as a scarf, but also as a headdress. It looks incredibly stylish and original, which is why it has gained such popularity.

Knit an unusual bactus with knitting needles, but also be patient, as the length of this scarf varies from 1 to 1.5 meters. Bactus is a triangle knitted scarf, elongated and does not look like a shawl.
The classic scarf-kerchief is a simple garter knitting. This scarf is most often made from multi-colored yarn, which is dyed in sections. As a result, an unusual accessory is obtained, despite such a simple knitting. Knitting a bactus with knitting needles is a great chance to treat yourself or someone to a new thing. Often the scarf is knitted, at the end crocheted, but not in all models.

How to wear bactus

There are many ways to tie a bactus:

• a common way is to wrap your neck like a simple scarf, only so that the corner is under the chin itself;
• lay the corners of the scarf on top;
• wrap the triangle with the edges of the scarf;
• the scarf can be fixed with a brooch, tied in a knot, tighten the ends into a bow.

Baktus is a fashionable novelty, a versatile scarf, great for everyone. If you have not yet purchased such an accessory, try knitting a bactus with knitting needles.
Let's look at some original knitting ideas with patterns, product descriptions.

Bactus garter stitch for beginners

• about 100 g of yarn (a mixture of wool and acrylic);
• marker;
• long knitting needles N4;
• row counter.

Operating procedure

Video master class: Bactus with a jagged edge

We knit an openwork bactus

To make this model of the scarf shown in the photo, you will need the following materials:

• circular knitting needles - 5.5 mm;
• 50 grams of yarn - 90m (40% merino, 40% alpaca, 20% silk) - 4 skeins are needed.

According to the diagrams, the right half of the scarf and the central loop are visible. The schemes are read from right to left to the central pele. Knit the other part from left to right, only in a mirror image.
As you repeat from rows 1 to 12 of the Bodi scheme, repetitions of the rapport of the pattern in width will become more frequent.
There are no purl rows in the Set Up and Bodi charts. Knit them according to this scheme: 2 facial, purl - to the last 2 loops - 2 facial.

knitting process

• Work in Set Up Chart first, then in Bodi Chart, and finish in Springtime Chart.
• Next, take the hook and use the auxiliary thread to knit a chain of 4 loops. Then, with knitting needles, with a working thread, raise 1 facial thread into each of the 2 tubercles on the other side of the chain.
• 1 - 6 rows: - tie with facial loops.
• 7th row: 2 facial loops; turn work and pick up 1 st in each of the 3 hem stitches. Remove the auxiliary thread, place the 2 open loops of the cast on row on the left knitting needle; knit 2 front loops. There should be 7 loops in total.
• According to the Set Up scheme, knit from 1 to 24 rows = 51 loops.
• According to the Bodi scheme, work from 1 to 12 rows (4 times) = 167 loops.
• According to the Edge scheme, knit from 1 to 34 rows (1 time).
• Close the loops with facial ones. Remove the ends of the threads, the bactus is ready.

Knitting a stylish bactus "Breakwater"

The order of the manufacturing process

• Cast on 3 sts on the needles.
• Knit 5 rows with knit stitches.
• From the 6th row (and each subsequent 6th row), add at the end of the 1st loop. Perform all increases on the inside.
• So knit about 40 cm in length, but you can use another length you want.
• Next, cross knit, where in every 2nd row add 1 loop at the end (on the inside), in every 6th - close the 1 loop (knit with a single loop). Close the hinges from the outside.


Having dealt with some models, you can easily make a bactus with knitting needles, it will be a wonderful gift for any person.

Sometimes a diagram from a photo or a text description is not enough to understand how to knit an accessory. Therefore, the video will help to understand the method of knitting bactus.


Video: Warm knitted scarf