DIY quilling snowflakes. Master class with step by step photos

We will need the following tools and materials:
- office or color paper of A-4 format,
- a pencil with a ruler
- stick for rolls or knitting needle,
- scissors and PVA glue,
- beads for decoration
- white threads.

Working process:

1. Line a sheet of paper along the length after 0.5 cm. Cut the resulting strips with scissors, observing the safety rules:
- Watch the cutting direction of the scissors.
- Scissors must be sharp.
- Do not hold the tool with the blade up.
- Do not leave it with exposed blades.
- Do not cut with scissors on the go.
- During work, do not approach a friend and do not distract him.
- Pass scissors can only be closed and rings forward.

2. Making "petals"

Roll the strip with one end onto the knitting needle into a roll. Remove it and slightly unroll until a ringlet with a diameter of 2.5-3 cm.

5. From the resulting figures, we will begin to collect a snowflake.
Take a blue "roller" and glue six "petals" to it with rounded ends. To make the base of the snowflake more durable, you need to glue the “petals” together as well.

There is more than one master class from which you can learn how easy it is to create it, it will not be difficult at all if you put the whole process on the shelves.

It originated in European countries more than five hundred years ago and involves the twisting of paper strips and their combination into various patterns and crafts.

To create crafts using the quilling technique (snowflakes, for example), a minimum of tools is required: an awl (can be replaced with a toothpick), tweezers, scissors and glue. The most important material is paper, which is cut into strips. Most often, strips about three millimeters wide are used for crafts.

simple snowflake

This craft is very easy to do and does not require special skills.

Master class on how to make snowflakes using the quilling technique:

1. Take a sheet of plain paper and draw the same lines with a ruler and a pencil.
2. Cut the sheet into strips.
3. Take an awl or toothpick and attach the edge of the paper strip to its end.
4. Wind the strip around the tool.
5. Glue the end of the strip to the resulting coil and carefully remove the roll from the awl.
6. Make another such coil, only now it needs to be slightly squeezed with your fingers on one side.
7. Make five more of these droplet coils.
8. Take the first card and glue six "droplets" to it.
9. Now roll six coils and squeeze with your fingers on two opposite sides. You should get a figure resembling the shape of the eyes.
10. Then glue the new pieces between the snowflake petals.
11. Take three strips, fold them in half and cut. As a result, you will get six short stripes.
12. From the new strips, twist six coils.
13. Glue a new spool onto each tip of the eye piece.
14. Now make six more coils from long strips, only slightly larger than the first. To do this, do not tighten the paper too much.
15. Glue the new spools on top of the droplets between the small rolls.
16. Make six more large coils and bend their sides with your fingers to make a square.
17. Glue them with the top to the large coils.
18. Take a pencil and wind a paper strip around it.
19. Glue the end of the strip and remove the coil.
20. Glue a new spool to one of the tops of the snowflake and thread ribbon or thread through the ring.

Such quilling snowflakes will look beautiful on a Christmas tree, doors or windows. Even after the end of the New Year holidays, many still do not want to take off this beauty for a long time.

Snowflakes (quilling) - gluing schemes

You can make a lot of different snowflakes from just a part of one shape. To do this, cut a lot of strips of the same length and width, take an awl or a toothpick and wind the rolls. Make more than ten units of identical coils, and then glue them together to make snowflakes (quilling). Schemes can be any, for example, as in the picture above.

In all cases, the process of gluing coils should begin from the middle of the craft. That is, glue the parts to each other so that they form a circle. Then continue to glue other coils. In some types, the rolls must fit snugly together, in others the center must be hollow.

More complex crafts

To make openwork snowflakes using the quilling technique, it takes more time and perseverance. But the result is worth it.

Instructions for creating openwork snowflakes:

1. Prepare paper strips, tweezers and glue (Figure 1).
2. Fold the five strips in half (Illustration 2).
3. Lubricate one end of the strip with glue and glue it to the middle with tweezers (illustrations 3 and 4).
4. Wrap the second half of the strip around the petal and glue its end (illustrations 5, 6 and 7).
5. Saddle four more similar petals, only each should be smaller than the previous one. In total, six petals of each type are needed (Figure 8).
6. Take the smallest petal and grease its tip with glue (Figure 9).
7. Glue the petal in the middle of the other (Figure 10).
8. Collect all five petals in the same way (Figure 11).
9. Gather all six petals (picture 12).
10. Squeeze the finished petal with your fingers, making it elongated (Figure 13).
11. Give a flattened shape to all six petals (Figure 14).
12. Glue all the petals together (Figure 15).
13. Cut six more strips and fold them in half (Figure 16).
14. Cut six strips, fold them in half and cut the ends diagonally (Figure 17)
15. Screw each end onto an awl or toothpick (Figure 18).
16. At a distance of 3.5 centimeters from the middle, glue the coil (Figure 19).
17. Press lightly on each petal tip to fluff it up (Figure 20).
18. Glue the "stamens" between the petals (Figure 21).
19. Insert the bevelled strips inside the "stamens" and glue them (Figure 22).
20. Take loose sequins and sprinkle them on a snowflake (Figure 23).

Snowflake is ready!

1. You can make snowflakes-candlesticks using the quilling technique. To do this, collect two crafts of different sizes - one smaller, the other larger. Then just glue one on top of the other. In the one that will be on top, the middle should be empty. This is where the candle-tablet will be inserted.
2. As a decor for snowflakes, you can use beads, rhinestones, sparkles and the like.
3. To achieve an openwork look, expand your knowledge and make coils of different shapes.

Basic forms of quilling

There are twelve forms of coils that the quilling technique has. Snowflakes can be made using either one or all of them.

1. Open coil: the end of the strip is not glued.
2. Closed coil: the end is glued.
3. Tight coil: the strip is stretched throughout the work and the end is tightly glued.
4. Large spool: A pencil is used to create.
5. Drop: one end is pressed with fingers.
6. Eye: both ends are pressed with fingers.
7. Petal: the coil is compressed and folded on one side.
8. Sheet: the coil is compressed on both sides and waves are made.
9. Curls: the strip is folded in half, and then the ends are wound in the appropriate directions (inside, inside out, in different directions).

After you get acquainted with the main points, you can proceed to more complex work in the quilling technique.

On the eve of the new year, snowflakes not only cover the ground, but also the walls of apartments. The easiest option is, but if you have an extra hour of free time, try making quilling snowflakes. Such a beautiful decoration will help create a festive entourage, and you and your children will plunge into the New Year's chores. With such a product you can decorate a postcard, a box with a gift, give it as a gift.

Necessary materials for quilling

The technique is very simple and you don’t have to spend fabulous money on materials. For work you will need:

• strips of paper;
• scissors;
• a tool for twisting tapes;
• glue;
• tweezers.

You can buy a ready-made quilling kit, which will already have colored strips of paper and tools. But for snowflakes, even plain white paper will be enough. If you want to make beautiful colored snowflakes, then take paper of the appropriate colors.

The strips are easy to cut yourself. Take a sheet and a ruler, draw points at an equal distance from each other (optimally 0.5-1 cm), line the sheet and cut along the lines. You will get the same strips from which you can fold a snowflake. To repeat most of the crafts shown in the photo, the diagrams are not needed, all individual details are visible quite clearly.

The principle of forming all parts is based on the twisting of strips of paper. They can be wound on an ordinary wooden skewer. It is much more convenient to do this if you make a 0.5 cm incision in it with a knife. Then the end of the paper can be inserted into this hole, it will be well fixed, and you can easily form the necessary element.

Making snowflakes

To create a magical New Year's interior, you will need a lot of snowflakes, so you can safely involve the whole family in the process of making them. It is important to understand exactly how parts are formed, of one form or another.

Take a few tips into service: to make elements of identical size, prepare strips of the same length in advance. To make a circle, simply wind and remove a strip of paper. If you need a semblance of a rhombus, after removing it, pinch it with your fingers on both sides. If you want to get an oblong petal, squeeze it a little with your fingers.

Start with simple snowflakes, gradually complicating the schemes. Decorate finished crafts with rhinestones and sparkles.

The quilling technique appeared quite a long time ago, about 500 years ago. For the first time, it began to appear in European countries. This technique involves twisting strips of paper and then gluing them together. Further, various patterns and crafts are made up of these swirling strips. Folded stripes form both closed and open shapes. Patterns are formed from simple figures, which can be both simple and whole works of art. Patterns in this technique are very airy and lacy. Therefore, today we will consider how to make an original quilling snowflake step by step. We will make an openwork snowflake that can be hung on a New Year tree or near the desktop so that it reminds us that the holidays have come and we need to devote more time to relatives and rest.

Learning the basics of quilling technique: snowflake step by step for beginners

• Toothpick;
• Tweezers;
• Scissors;
• Glue;
• Paper.

Let's start making a large snowflake using the quilling technique.

We take a landscape sheet and draw stripes on it with a pencil and a ruler. Make sure the lines are even. Then we cut the sheet along the drawn lines. A clerical knife can help us with this.

We take a toothpick and apply it to the edge of the strip, and then we wind the strip onto the toothpick turn by turn.

We fix the end of the strip and carefully remove the resulting roll from the toothpick.

If you do not quite understand the description of this process - do not worry, below will be presented to your attention a photo that shows step by step the process of creating basic elements.

We make another such blank, only now we squeeze one edge with our fingers. As a result of this action, we get a droplet-like element. For our composition, we repeat the above manipulations five more times.

Then we glue the resulting 6 droplets to the first figure.

Again we take a toothpick and wind more rolls and now we squeeze it on both sides so that the result is a figure in the form of an eye.

Between the petals-rays, we glue the parts we just made.

Now we take 3 strips, bend them in half and cut them, we get 6 short strips.

We miss them in the way described above.

On each tip of the part we glue a figure in the shape of an eye.

We make 6 more coils and bend them with our fingers until we get a square shape.

We glue them with the top to a large coil.

Now we wind a strip of paper around a pencil, glue the end of the paper and remove it from the pencil. This detail will act as a loop for hanging it on Christmas trees, or on whatever your heart desires.

Glue it to one of the tops of our snowflake. We stretch a ribbon or thread in the resulting ring.

As with any activity in quilling, of course, there are certain clichés or, in other words, basic elements. Let's see what they look like. There are different types of coils. Let's look at the most popular ones.

1. An open coil is when the end of the strip is not attached to its body.
2. Closed coil - the end of the strip is fixed, forming a closed loop.
3. Tight coil - the strip is stretched very strongly throughout the twisting and tightly fixed, such a coil looks like a knot on an openwork background.
4. Large coil - when creating, we use an ordinary pencil or any other thick core or frame for winding.
5. Drop - press one end with your fingers.
6. Eye - press both ends.
7. Petal - squeeze with your fingers and bend on one side.
8. Sheet - squeeze on both sides and make waves.
9. Curls - fold the strip in half and wind the ends in different directions.

You can see various options for snowflake schemes in the photo below:

Quilling is the art of creating openwork patterns from paper. Translated from English quill - "bird feather". The brainchild of your creativity can be beautiful airy lace completely transparent patterns. You can create amazing compositions full of rainbow colors that evoke the mood you need. Paintings made in this technique will fit into any interior: from Gothic to high-tech, the flexibility of this art allows you to combine rigor and elegance, colorful or gloomy tones, from flowers to portraits, it depends only on the desires and scale of work: all this is possible talk about quilling. You can not only spend time with pleasure, but also for the benefit of both your interior and your wallet, because quality work has a high price.

Video selection on the topic of the article

A ruler with round holes is needed so that our spirals are of the same diameter. You can buy a regular ruler with holes in an office supply store. Although this ruler is not needed for our snowflake. It is worth noting that you can twist the strips with different tools. You can use an awl, a special slotted rod, a toothpick.

And now we will make an openwork and airy one with our own hands.

quilling snowflake.

So, for the snowflake we need:

• Paper strips:
  1 - 15 cm for the central circle
  8 - 8.5 cm for sleeve
  4 - 15 cm for scrolls
  4 - 7.5 cm for droplets
  4 - 5 cm for diamonds
  The standard strip width is 3mm. The paper should be fairly thick (paper weight should be at least 60 grams per square meter) so that it folds neatly and holds its shape. If you have a shredder, then the strips can be made directly on it.
• Any quick-drying glue, preferably not very liquid
• Special tool for quilling. The most common alternatives are the gypsy needle or the most common wooden toothpick.

0 We start from the central circle (15 cm strip). The paper must be folded very tightly so that it itself can keep the correct shape. After that, drip glue on the tip of the strip and glue it to the circle.

0
0 For droplets, we use strips 7.5 cm long. The technique is almost the same as in the previous step, only at the end, before gluing the edge, we leave a little more free space and give the circle a droplet shape.

0 We make diamonds from strips 5 cm long. We twist small circles, glue the edge and then make a diamond out of it.

0 Let's move on to scrolls. We bend the strips 15 cm long in half and turn the spirals towards the center, we should get a kind of hearts.

0 The last piece is the sleeves. For them, we use strips of 8 cm. On the one hand, we make 2 turns, on the other, we weld about 2.5 centimeters. When all the sleeves are ready, we glue them with “backs”.

0
0

After all the preparations, we should have:
• 1 circle
• 4 drops
• 4 diamonds
• 4 scrolls
• 4 sleeves

0 Now that all the parts are ready, we glue our snowflake together step by step. After the snowflake is ready, it can be covered with glitter or a silver-colored spray.

0
0
0
0
0

You can leave the snowflakes white. Or you can cover them with a spray can or sprinkle with sparkles.
You can hang a snowflake with a beautiful ribbon or a colorless fishing line.

Snowflakes can be made from white paper and spray-painted with paint of the desired color. And you can make snowflakes out of colored paper.

Colored snowflakes (quilling)

More photos of beautiful snowflakes in this beautiful technique by Stephanie Sanchez:

Please note that some snowflakes are made of two colors, but all colors are very soft, which gives the snowflakes a lace look.

Airy snowflakes and paper decorations

What technique can better convey the airiness and lightness, the openwork lace pattern of snowflakes than the quilling technique? Making snowflakes out of paper, or rather from twisted strips, resembles a mosaic or a kaleidoscope with a huge number of options. The prepared parts can be glued to the base, making postcards or panels, or they can be glued together to hang amazing lace decorations on the Christmas tree. To perform these works, you will need white office paper. It must be cut into strips 5 mm thick along the short side. It is better to cut with a clerical knife along the ruler several sheets at once. For a small amount, you can cut with scissors. You can twist the strips with different tools. You can use an awl, a special slotted rod, a toothpick. But it was for making snowflakes that we most liked working with a wooden skewer. To make a snowflake (pendant or applique), you need to prepare a variety of shapes from twisted strips. Forms can be closed, i.e. glued and open, where no glue is used. Both are suitable for applications. And for snowflake pendants, you can use only closed forms.