In addition to the CND brand, which produces Shellac gel polishes, there are others. But the principle of application is the same for everyone. But keep in mind, if you decide to make such a coating, all funds must be of the same brand.

An ultraviolet lamp for manicure can be bought at any specialized store or via the Internet. The cost depends on the manufacturer.

It is important that the power of such a lamp is not less than 36 watts. Otherwise, your coating will not harden on the nails. It is also desirable to choose lamps with a large amount of internal space so that you can easily stick your whole hand in there. For convenience, the lamp should be equipped with a timer.

Step-by-step instruction Shellac coating:

First, polish your nails with a buff to remove all the roughness and bumps on the nail plate.

Next, it is very important to degrease the nails. This can be done with a cotton pad (it should be smooth, without lint) and regular medical alcohol. Dampen the disc and wipe your nails thoroughly. After that, it is very important not to touch them again.

Apply a thin layer of base coat and cure it in a UV lamp for 10 seconds.

Then apply colored polish in one layer, fix it in a UV lamp for 2 minutes. Then apply a second layer and also hold in the lamp for 2 minutes. Try to apply the varnish in a thin layer. If the layer is too thick, it may not adhere well to the nail plate.

The final stage - wipe the nails with a cotton pad dipped in alcohol. This will remove the top sticky layer. Your manicure is ready.

In order to remove Shellac polish, you need to use a special shellac remover (cost 200 UAH) or nail polish remover with acetone. Soak a cotton pad in it, apply to the nail, wrap in foil and leave for 10-15 minutes. Then, using a wooden stick and a nail file, remove the varnish.

Shellac- this is a unique tandem of gel and varnish in one bottle for a strong, bright, durable coating on your nails. It is very easy to make a manicure with a decorative shellac coating at home, and if you follow the technique of applying gel polish to your nails correctly, then appearance your fingers will remain flawless for 2-3 weeks without any correction. In addition to colored gel polish from a wide palette of shellac, to perform a home manicure, you need to buy a base, a top gel, a UV lamp and a nail degreaser. Recently, prices for gel polishes from famous brands and for sets with all the necessary accessories have noticeably decreased and you can easily choose the right option for yourself without significant costs.

When choosing a lamp for drying gel polish, pay attention to models with a power of 36 watts with fluorescent lamps and a timer. It is important that the fingers of one hand fit easily into the interior of the lamp. By treating the nails with a degreaser before the procedure, we ensure high-quality adhesion (adhesion) of the base to the surface of the nail. The base coat protects the natural plate from staining with colored shellac, and the top gel prevents chips and cracks on the decorative layer. From this material you will learn how to properly make a shellac manicure at home. Step-by-step instructions with photos of all stages of the procedure and video tutorials for beginners will help you quickly learn how to use a UV lamp to polymerize the coating layers applied to the nails.

Shellac brand CND (Creative Nail Design) has a thick texture, a high degree of saturation and a rich palette of colors with a variety of shades. In addition, any color of CND gel polish can be mixed without compromising the quality of the coating. Complete with bottles of colored shellac you can find mixing instructions different colors in order to obtain certain beautiful shades. Shellac CND products have proven to be of good quality, but other gel polish manufacturers (Kodi Professional, OPI Gelcolor, Laque RuNail, Professional Nail Boutique) are not far behind the flagship. Gel polish from any of these well-known brands does not dry out nail plate, does not cause delamination of nails, does not make nails yellow. But in order for the coating to remain bright and durable on the nails for several weeks, use all products (top, base, gel polish) of the same brand for manicure.

♦ USEFUL TIPS

Colored gel polish should not be applied in a thick layer, as the hardened coating will begin to peel off quickly. To do decorative manicure deep and saturated, we apply shellac in two thin layers and dry each of them in an ultraviolet lamp;

Apply the coating evenly, trying to leave a small indent from the cuticle line and side ridges. If the gel polish floats along the edges of the nail, then the likelihood of cracks and chips on the coating increases;

Top gel is applied in a thicker layer than colored shellac. The top coat should ensure the strength and durability of the manicure;

Keep your fingers in the UV lamp exactly as long as it takes for each layer of coating to polymerize. Insufficiently cured gel polish on the nails begins to wrinkle or bubble. A dry coating is less resistant to mechanical damage. If the skin on the fingers turns red or begins to peel off from exposure to ultraviolet rays, lubricate the skin with a fat cream before polymerization;

While a base coat is great for smoothing out ridged or deformed nails, flaking nails can still cause the coating to peel off. Therefore, be sure to take care of the health of your nails, make firming baths and masks that restore the structure of the nail plates;

Before you make a shellac manicure, you must very carefully clean the surface of the nails from the remnants of the old coating with a special liquid. After correcting and removing the overgrown cuticle, clean the nails with a manicure brush from the remnants of dry skin. The remaining particles on the nails impair the adhesion of the coating to the nail plate;

Seal the end of the nail at least three times during the manicure: when applying the base, the first color layer and the top gel;

Do not remove the adhesive layer from the coating after each polymerization procedure. The sticky dispersion layer should be removed with a clinser only from the topcoat;

If you are going to use the decor from the nail art kit (sparkles, glitter, rubbing powder) for nail art, be sure to fix it with top gel. Only small rhinestones can be laid out on top of the top (but with additional fixation with top gel between the pebbles).

♦ HOW TO MAKE A MANICURE AT HOME

Tools and materials:

· Ultraviolet lamp (luminescent or light-emitting diode LED);

· A set of manicure tools (nippers, files, buff);

Base (basis) to protect the nail;

Colored shellac (one or more suitable shades);

· Top-gel for protection of a gel-varnish covering and fixing of a decor;

Degreaser to improve adhesion;

· Klinser for removal of a sticky dispersive layer;

· Orange sticks;

· Lint-free wipes.

Step-by-step instruction:

❶ Preparatory stage.
First, we trim the free edge of each plate with nippers or scissors, then we give the nails the desired shape with nail files with varying degrees of abrasiveness. We remove the remnants of the old coating with nail polish remover, and push the overgrown cuticle with a pusher and cut it off with a trimmer (or remove it with a remover);

❷ To improve the adhesion of the surface of the nail to the base, you can lightly sand the plates with a buff (if you use shellac from CMD, then it is not necessary to remove the shine from the nails). Now we impregnate a lint-free cloth with a degreaser and wipe each nail. After degreasing, try not to touch the nail plates with your fingers;

❸ Now apply the base in a thin layer on each nail of the hand and seal the end. Try not to go with a brush on the cuticle line and on the side rollers. We dry the base layer in a lamp for about 40-50 seconds (be sure to look at the instructions to set the specified polymerization time on the timer);

❹ Then alternately apply two thin layers of colored shellac to the hardened base coat and dry each layer in a lamp for about 1 minute (check the exact time in the instructions). We seal the end with the first layer of shellac;

❺ Apply a thick layer of top gel and seal the end of each nail. The polymerization time of the top coat is 1.5-2 minutes (depending on the lamp power);

❻ After polymerization of the top coat, remove the sticky dispersion layer from each nail with a lint-free cloth soaked in clinser;

❼ It remains to rub

Shellac is a breakthrough of the 21st century in the field of beauty and femininity. The coating quickly won the hearts of fashionistas with its durability and practicality, and after a few years, literally 90 percent of women began to use the coating constantly. Let's talk about how to paint shellac nails at home, because not every one of us can afford monthly salon procedures, the cost of which is quite high.

The advantages of shellac

The advantages of shellac are obvious literally from the first acquaintance with this coating. The gel significantly strengthens brittle and bending nails, allowing women not to worry about changing their manicure for a long time. The coating lasts from 3 to 5 weeks, after which, as a rule, a correction is recommended. If the material is of high quality, the manicure remains “like new” even after a month, however, correction is necessary because the growth line of one’s own nails becomes clearly visible.

With shellac, you can safely go on vacation and be sure that your hands will look well-groomed and beautiful until you return home. You can also freely engage in primordially female household duties - washing, cleaning and cooking.

Shops with materials for manicure offer fashionistas a huge palette of coating colors, as well as various rhinestones, sequins and sliders.

The most popular design options

The eternal female question "what to do nails?" causes a lot of inconvenience, but only when a woman does not follow fashion trends.

The coming season is recommended to fashionistas to pay attention to tenderness. Yes, pastel colors are called tenderness, the most popular among which are lilac, mint, peach and pink. The classic jacket does not lose ground either, although the options for its execution have become the most unthinkable. All sorts of animal sliders, floral prints and reptiles are literally the leaders of the last few years.

Also, defiant red and natural, beige colors will never go out of fashion.

If your own imagination is in a stupor, you can find a million beautiful and stylish designs on the Internet.

What do you need to make shellac at home?

In order to master new horizons and try yourself as a manicure master, you need to purchase a minimum set of materials and tools. These include:

Some girls are fans hardware manicure, in this case, it is worth purchasing a special apparatus for cutting off old material and removing the cuticle. The purchase will be justified if you plan to engage in manicure creativity all the time, if the desire is “at a time”, you can get by with improvised manicure devices.

Do you already have everything you need? It's time to start the exciting process.

Steps for proper application

Before applying gel polish, it is very important to properly prepare the surface for work. If you already have a manicure on your nails, carefully get rid of any signs of manicure.

First of all, you need to give the nail the desired shape. A hard-coated file will help with this. Do not forget about the cuticle, which is removed or moved as close to the skin as possible. Lastly, take a soft file and sand the surface of the nail to a shine. If all the steps are over, treat the nail with a degreasing surface - this is necessary so that the gel polish adheres well and there are no rough edges on the nails. After degreasing, in no case do not touch your nails. The preparation phase has been completed.

Then the most interesting and exciting begins, especially for those who do such a manicure for the first time - a thin film of the base liquid is applied to the nails. It is important that the coating lay flat. The fingers are placed in the lamp for 15 seconds. The base is a very important intermediary between your nail and shellac, because how long you can carry this manicure depends on its quality.

After the base is dry, the same color varnish that you have chosen for the design is applied. To achieve a rich color, several layers are applied, the main thing is not to overdo it. The scheme is simple - “apply a layer + dry in a lamp”, just repeat the procedure twice on each nail. Carefully ensure that the coating is applied evenly, all kinds of dust and villi do not get into it, so that the product does not get on the skin of the fingers and does not come into contact with the cuticle.

A bright, shiny shellac manicure that lasts for at least two weeks on the nails can be done at home without resorting to the help of specialists in expensive salons and without giving a tidy sum each time for this procedure.

The procedure for applying shellac is done in stages, including preparing nails, applying varnish, protecting and drying. Let's dwell on them in more detail.

Step-by-step instructions for applying shellac gel at home

1. Removing old polish, shaping nails

Before the procedure, it is necessary to remove the old varnish from the nails and give them the desired shape using a nail file. At the same time, try not to steam your hands before the procedure so that the nails do not exfoliate. Also, if possible, do not use scissors.

• If you need to shorten the nail a little, buy special sapphire or sand files for strong nails and finely abrasive files for thin and weak ones. Metal nail files, fortunately, are the last century.
• Hold the file at an angle, filing from edge to edge of the nail, without affecting the periungual skin. The free edge can be left long enough, as shellac will strengthen the nail plate. If the edge of the nail remains rough after the procedure, treat it with a finely abrasive nail file.

2. Cuticle treatment

3. Polishing the nail

• Carefully remove the gloss from the nail with the soft side of the grinder, but try not to saw through the nail. Brush off dust with a stiff brush.

4. Degreasing

• Wipe the nail plate with a special degreaser, paying special attention to the end - the area near the nail ridges and the inside of the free edge of the nail.
• Degreasing will allow shellac to stay on the nails for a long time.

5. First (base) coat

• Apply a thin layer of base nail protection. For example, bluesky gel polishes are very popular today. This is special agent, which can protect your nails from shellac pigments and improve the adhesion of varnish to the nail. The base should not fall on the side rollers and cuticles.
• After application, dry this layer under a special UV lamp (wattage = 36 watts) for about 10 minutes.

6. Applying shellac

The technology for applying Shellac color gel polish is simple.

• Roll the bottle several times in your palms.
• Cover the nail in two thin layers, each of which dry under the lamp for 2 minutes.
• At the same time, do not seal the sides and ends. Layers should be thin so that the coating does not swell.
• To experiment with colors, you can apply different layers of Shellac - the first with one color, the second with another. When mixed, unexpected results are obtained.

7. Application of a sticky layer

• After applying the color, the nail is “sealed” with a thick layer of top coat. At the same time, the free edge, the cuticle zone and the area of ​​​​the lateral ridges are necessarily sealed. The color remains between the base and the finish coat.
• And after this procedure - again ultraviolet.

8. Removing the sticky layer and moisturizing

• Using a lint-free wipe and a degreaser, remove the last sticky layer and apply a special moisturizer (for example, oil) to the periungual skin.

Remember that shellac must be stored at room temperature with a tightly closed jar. So, your manicure and nail brightness will last up to two weeks.

Each time, devoting time and all our imagination to a manicure, we hope that it will please us for a long time. For owners of good and strong nails, this can be done even with ordinary varnish. But for girls with thin and exfoliating nails, see at home long nails with good manicure longer than 2 days is just a dream. I myself am the owner of such nails, and my usual manicure with varnish looks worn after the first day of wearing, which is very depressing, because it takes a lot of time to do it. But here comes the help shellac coating. It lasts about two weeks on my nails and when I take it off I see long nails! It's just a miracle and some kind of holiday! Visiting salons for a long time, I thought, how to make shellac at home on one's own? And now, after a while, having learned and understood everything that is needed for shilak at home, I decided to write this article.

You can read more about all the necessary tools and their analogues for shellac coating in our article. Before applying gel polish, be sure to do a manicure. Edged or not edged - according to your desire, although somewhere they write that for shellac coatings need only dry european manicure. From my own experience, I can say that this does not affect the quality of the coating and the period of wear. If you want to know how to do a manicure at home, then all useful information and necessary tools can be found here.

What's Included shellac set for home?

• UV nail lamp
• Degreaser
• Lint-free wipes
• orange stick
• Base coat shellac
• Base color gel polish
• Top coat
• Liquid for removal of a sticky layer
• Cuticle oil

We equip ourselves with a workspace for shellac manicure at home. We take a UV or LED lamp for nails. We plug it into the socket and put it on the prepared table. Nearby we have everything you need for shellac at home. All procedures are carried out first with one hand, and then with the second. We moisten a lint-free cloth with a degreaser (you can use a liquid to remove the sticky layer or any alcohol lotion instead), wipe each nail.

Apply a thin layer of base coat, sealing each nail. To seal, run a brush with gel polish along the end of the nail. This will keep the coating in perfect condition for longer. If the gel polish gets on the skin of the nail, then remove it with an orange stick. Dry in the lamp for 2 minutes. Then we apply the color in a thin layer, also not forgetting about sealing. One layer will create a shade, the second will achieve a rich color. Each layer polymerizes in the lamp also for 2 minutes. Then top coat with a top coat. It is slightly thicker than the base and color, so the layer will be a bit thicker. If you forgot to seal some layer, then the top must be sealed! Otherwise, wear time shellac coatings may be reduced. The top is also dried in a UV lamp for 2 minutes.

Wet a lint-free cloth with a liquid to remove the sticky layer and run it over each nail, removing stickiness from the top coat. We generously lubricate the skin around the nail with cuticle oil to moisturize it after UV rays. We repeat all the procedures sequentially with the other hand. We love our manicure.

Procedure applying shellac at home quite simple, and its payback period is quite short. And the time savings are huge, because now there is no need to immediately run to the salon to correct the shellac coating, everything can be done safely in the evening at home. How to properly remove shellac coating, you can find on our website. I hope that this instruction will be useful for you and will help you in performing shellac manicure at home. We wish you success and good mood!